张力腿平台筋腱支撑浮筒结构设计研究

在张力腿平台筋腱与海底桩基连接后,需要筋腱支撑浮筒为筋腱提供足够的浮力,保证筋腱在平台运抵工作海域之前不会发生倾覆。针对南海油田自主研发的张力腿平台筋腱实际尺寸及设计要求,设计了适用于1 061 mm(40英寸)筋腱、500米水深的张力腿平台筋腱支撑浮筒,并对筋腱支撑浮筒主要受力进行了分析计算,根据所计算的载荷情况对关键部件进行了有限元仿真分析,验证了结构强度的可靠性,并得到了结构的应力集中点与最大变形点,为筋腱支撑浮筒的结构设计提供了参考。     

东海西湖凹陷第三系反转构造及其对油气聚集的影响

东海西湖第三纪凹陷经历了早期裂陷和晚期挤压的构造作用,形成了现今规模宏大的反转构造。反转构造是先存的张性断裂后期受到挤压逆冲反转而形成的一种挤压构造与拉伸构造在垂向上叠加的复合构造。按反转强度的差异,本区的反转构造可划分为简单断展型和穿透断展型2种基本类型;按反转构造的几何样式,又可分为简单后冲反转、复合“Y”字型反转、“火”字型反转和花状反转等。凹陷内发育有东缘、中部、西斜坡边缘等3个反转构造带。沿中央凹陷带的反转作用最强,东缘次之,西斜坡边缘最弱。     

黄土河谷场地地形放大效应的研究

使用黄土河谷场地模型对地震动峰值加速度和频谱特征进行研究。结果表明,不同工况下各观测点PGA的放大比呈现出不同的变化规律。分析山顶和山谷各点的傅里叶谱以及谱比发现,在地形和土层共同作用下的放大效应是各自单独作用下放大效应的乘积。     

Helmert方差分量估计在GPS/GLONASS/BDS组合定位权比确定中的应用

因GNSS系统间观测噪声、轨道精度的差异,采用经验权比进行组合定位难以得到最优结果。基于此,在GPS/GLONASS/BDS组合定位中引入Helmert方差分量估计,对GPS/GLONASS/BDS组合单点定位和基线解算中各系统观测值进行合理定权。实验表明,采用该方法确定的伪距观测值最佳权比为5∶1∶1,相位观测值最佳权比为1∶1∶1,有效提高了GPS/GLONASS/BDS组合定位的精度和可靠性。     

珊溪水库地区深部构造探测研究

通过对珊溪水库地区进行深地震反射探测,获得该地区近地表至地壳中部的精细几何结构和深浅构造关系。结果表明,该地区地壳结构在纵向具有明显的分带性,在横向显示出以断层为界的块状结构特点。研究区内走向北西的双溪-焦溪垟断层向深部延伸超过20 km进入中下地壳,为该区域内主要控制性断层,主要影响周围浅部断层的发育,是该地区主要发震构造。     

Optimal design of two-dimensional wings in ground effect using multi-objective genetic algorithm

The shape optimization of the 2-dimensional wing in ground effect (WIG) has been performed by the integration of CFD (computational fluid dynamics) and MOGA (multi-objective genetic algorithm). Because of the trade-off between the aerodynamic forces and the height stability, it is difficult to satisfy the design requirements of efficiency and stability at the same time. In this study, the lift coefficient, the lift-drag ratio and the static height stability are chosen as the objective functions to obtain the optimal wing profiles of a WIG craft. An NACA0015 airfoil is used for the baseline model; the aerodynamic characteristics of the base model are compared with that of the optimal solutions. The profile of the airfoil is constructed by four Bezier curves with fourteen control points resulting in the eighteen coordinates, which are adopted as the design variables. The optimal solutions of the multi-objective optimization are not unique but a set of the non-dominated optima: the Pareto frontiers or a Pareto set. As the results of the multi-objective optimization, the forty Pareto optima, which include high-lift, high-efficiency, and more stable airfoils on the edge of the 3-dimensional objective space, are obtained at thirty evolutions of the generation.     

Reproductive biology of Parazoanthus axinellae (Schmidt, 1862) and Savalia savaglia (Bertoloni, 1819) (Cnidaria,Zoantharia) from the NW Mediterranean coast

Despite the wide distribution of zoanthids, little is known about their pattern of reproduction. Here we investigate the reproductive biology of two Mediterranean species, the common Parazoanthus axinellae (Schmidt) and the rare Savalia savaglia (Bertoloni). For both species, samples were collected during an annual cycle, from January to December 2005, in the Western Mediterranean (Ligurian Sea, Italy). Both species are gonochoric. In P. axinellae the sex‐ratio (n colonies = 30) showed a slight predominance of male colonies (M/F = 1.35), whereas in the population of S. savaglia (n colonies = 15) a predominance of females was found (M/F = 0.3). In P. axinellae the first gametocytes were visible in March, whereas in S. savaglia they became visible in May. Both species reproduce at the end of autumn when seawater temperature begins to decrease. Parazoanthus axinellae (10 m depth) spawns eggs and sperms in November, whereas S. savaglia (67 m depth) spawns in December. In P. axinellae sexes were segregated on a rocky wall, with males occurring deeper, whereas male and female colonies of S. savaglia were irregularly dispersed in the population. The maximum number of oocytes differed between the species, being higher in P. axinellae than in S. savaglia.     

基于二分图的温度网络拓扑性质研究

利用中国地区435个台站1961—2002年逐日平均温度序列,将温度变化发生在9天时间尺度上的特征编码在网络中,通过研究二分图温度网络(BGT网络)中节点与项目的关系,揭示出9天时间尺度上温度变化的特征及其在空间上的拓扑统计性质.网络中各节点RRRD, RrDD, eeed, DRRD, DDRR等所代表的温度波动模态在网络中异常频发,对9天尺度温度变化的预报有一定的指导意义.统计网络的节点度分布,集群系数等拓扑结构特征量,发现BGT网络服从正态分布特征.BGT网络项目内节点度的多样性大体上     

1.5 μm波长n-p-n型InGaAsP-InP晶体管激光器材料外延生长

基于器件模拟仿真,设计了一种1.5 μm波长InGaAsP-InP晶体管激光器材料外延结构. 其多量子阱有源区置于基区非对称波导中. 仿真结果显示该外延结构能够获得较好的光场限制和侧向电流限制. 对该材料MOCVD生长研究表明,基极重掺杂接触层中Zn²⁺扩散将导致量子阱严重退化. 通过对其扩散过程的模拟仿真,采用平均掺杂浓度为1×10¹⁸ cm^-3的梯度掺杂,有效地抑制了Zn²⁺向量子阱区的扩散. 所获得的外延材料在     

相变前的热力学平衡态对铁电液晶排列的影响

本实验选用ZLI-3654型铁电液晶(FLC)以及SE-3140型取向剂制备FLC器件样品,通过改变FLC相变过程中的降温速率以及相变前的热力学平衡态来研究FLC相变前的热力学平衡态对FLC排列的影响,共进行了十组实验.实验后,将FLC器件静态对比度进行比较,得出手性向列相到近晶A相(N^*-SmA)相变前的热力学平衡态对FLC实现均匀排列起着极其重要的作用的结论.实验结果表明:器件的静态对比度可高达620 ∶1, N^*-SmA相变前的热力学平衡态有利于形成高对比