Pressure State in Deep Crust and Formation Depth of UHP Metamorphic Rocks

INTRODUCTIONSincethediscoveryofeclogiteswithcoesiteanddia mondinclusionsrelatedtothecontinent continentcollision orogenyenvironment,theultrahigh pressuremetamorphism(UHPM )intheDabie Suluhasarousedgreatinterestinmanygeologists (Liouetal .,1994 ;Xuetal.,1992 ) .Experimentalstudieshaveprovedthatsuchmineralsasdia mond ,coesiteandomphaciteoccurredat 2 - 5GPa (andatthecorrespondingtemperatures) (Stevenetal.,1982 ;MirwaldandMasonne ,1980 ) .However,itdoesnotmeanthatthemetamorphicrockscanbe…     

“Three-Component” Digital Prospecting Method：A New Approach for Mineral Resources Quantitative Prediction and Assessment

“Three-component” method consists of three clase-connected aspects: geological anomaly,diversity of mineralization and mineral deposit spectrum. All these three concepts are not new separately, but it is a new approach to combine these three aspects in one single concept for quantitative mineral resources prediction and assessment and it is also the first time to conduct a more detailed study in each aspect. Investigation and clarification of geological anomalies, diversity of mineralization and spectrum of mineral deposits are realized by digitization and quantification of ore forming controlling factors, oreexisting symbols or marks, characteristics of mineralization and regulation of ore-genesis and laws of distribution. These procedures lead to construction of a “digital model“ for mineral resources prediction andassessment.     

正交法在注浆材料优化设计中的应用

应用正交试验设计法，对粘土固化浆液的配比进行了优化，得到了最佳配比，并将其应用于洛湛铁路益娄段岩溶路基的注浆加固，收到了很好的整治效果。     

复合注浆法在基础加固中的应用

复合注浆法是将静压注浆法和高压旋喷注浆法进行时序上的结合，分别发挥两种注浆加固方法各自的优点，又可克服各自的技术和工艺缺陷的一种基础加固新方法，它可以较好地对既有建筑物地基和新建建筑基础出现质量问题进行加固处理。简述了复合注浆法的加固作用机理、设计及计算模型，在此基础上通过工程实例介绍其施工技术并分析其加固效果和经济性。     

旱作春小麦蒸散量测算方法的比较

采用波文比—能量平衡法和蒸渗计对农田蒸散量进行了为期3a的对比观测试验。结果表明，在半干旱雨养农业区，两者测算的农田蒸散量平均偏差为20％，波文比—能量平衡法计算值大于蒸渗计实测值，基本满足精度要求；无感热平流时两种方法所得蒸散量相关性较有感热平流时的好；在平流逆温状态下采用波文比—能量平衡法的计算误差大于非平流状态下的计算误差；由于蒸渗计隔断了与周围农田的水热交换，导致了蒸渗计测量的蒸散量较采用波文比—能量平衡法的计算值偏低，其偏差大小需要进一步试验确定。     

一种利用测井资料预测岩石可钻性的计算机方法

介绍了一种利用测井资料快速求得岩石可钻性级值的计算机方法。该方法能够比较准确地预测岩石可钻性，快速做出连续的地层可钻性剖面图。室内微钻头可钻性试验和江汉油田现场应用验证表明：该系统具有比较高的可靠性，是可以投入油田现场应用的。     

Methods for Setting up a Three-Dimensional Industrial Surveying System of “Building Blocks Type”

1　Methodsfororientatinginitialdirec tioninindustrialsurveyDifferentfromconventionalengineeringsurvey,thedistancebetweenthetwoangle measurementdevicesinindustrialsurveyisnomorethantenmeters.Theaccu racyforthemeasurementofobjectpointsisrequiredtobebetween± ( 0 .0 2～ 0 .0 5～ 0 .2 0 )mm ,sotheaccu racyfortheorientationoftheinitialdirectionoughttobehigh .Theexistingmethodsfororientatingtheinitialdirectionbetweenthetwoangle measurementdevicesincludemethodofusinginnertarget,collimatormethod,metho…     

用L-曲线法确定半参数模型中的平滑因子

提出了一种新的方法——L-曲线法确定平滑因子。通过确定合适的平滑因子，更好地控制了残差部分V^TPV与光滑度部分S^TRS之间的平衡，得到了更准确的参数估值。通过算例，将基于L-曲线法确定平滑因子的半参数模型解算方法和其他方法进行了比较。结果表明，用L-曲线法确定平滑因子后，提高了半参数模型计算结果的精度，可以更好地将观测值中的系统误差分离出来。     

基于Matlab的水准点稳定性分析

通过使用Matlab功能强大的数学软件，应用于测量工程的数据处理。具体解决变形监测中水准点是否稳定的判定问题。并通过计算实例说明其可行性和优越性。     

基于物方影像匹配和概率松弛的断面自动提取

提出了基于物方影像匹配的断面提取,为了提高匹配的可靠性,引入了概率松弛法,最终获得了高精度的断面.