口泉沟南水源地环境同位素研究和水资源评价

分析了大同矿区口泉沟南区的水文地质条件，利用氢，氧，铀，硫，碳等环境同位素研究了口泉南与相邻的泉域和三层洞泉域的关系及地下水的补给来源；用有限元法进行了地下水资源评价和水位预报，证明在该区建立供水１０＾４ｍ＾３的水源地是可能的。     

焦作矿区电法探测导,含水构造的效果

应用直流电法仪在井下进行了工作面巷道底板电测深和掘进头超前探测，查清了工作面底板水层的富水性和掘进头前头的地质构造及含水情况。目前，大部分探测结果已得到生产实践的证实。     

Soil-structure interaction analysis of the Hualien containment model

This paper presents results from forced vibration tests, microtremor observations and earthquake response analysis of a nuclear reactor containment model constructed on stiff soil in Hualien, Taiwan. The dynamic behavior of the soil-structure system is simulated successfully with two numerical models: a sway-rocking model, whose soil parameters are evaluated on the basis of the continuum formulation method, and a finite element model, using the program SASSI with the flexible volume substructuring approach. The dependences of the soil parameters of both models on the amplitudes of the different dynamic excitations are investigated in detail. An original numerical simulation of microtremor is performed. Comparison with results of a previous study involving a rigid tower on a soft soil site in Chiba, Japan is offered.     

Attenuation differences in layer 2A in intermediate- and slow-spreading oceanic crust

In situ seismic attenuationQ⁻¹logs are derived from borehole velocity profiles and reveal sharp boundaries between morphologies of the extrusive volcanic layers in intermediate- and slow-spreading oceanic crust.Q⁻¹logs are calculated from the scattering attenuation associated with vertical velocity heterogeneity in Ocean Drilling Program Holes 504B and 896A and in Hole 395A, located in 5.9–7.3 Ma crust on the Pacific and Atlantic plates, respectively. Our results strongly tie crustal properties to seismic measurables and observed geological structures: we find that the scattering attenuation can be used to identify the extrusive volcanic sequence because it is closely related to changes in the degree of vertical heterogeneity. We interpret a distinct decrease in the Q⁻¹log at the transition below the extrusive volcanic layer to correspond with the seismic layer 2A/2B boundary. The boundary is located at 465 m depth below the sea floor in both Hole 395A and 504B, although this is likely to be a coincidence of the sediment thickness at these sites. Layer 2A is estimated to be approximately 150 m thick in Hole 504B and > 300 m thick in Hole 395A. Cyclic sequences of high-porosity pillows and low-porosity massive units in the uppermost 100 m of volcanics in Hole 395A result in large velocity heterogeneities which cause > 5 times more attenuation in this layer than in Hole 504B. In Hole 896A, by contrast, fewer pillows, more massive flows, and a greater volume of carbonate veins decrease the velocity heterogeneity and attenuation significantly over only 1 km distance from Hole 504B. We conclude that the attenuation in the extrusive volcanics of the ocean crust is largely controlled by variation in local heterogeneity and morphology as well as by subsequent hydrothermal alteration. The observed differences inQ⁻¹profiles and layer 2A thickness at these sites may be attributed to variations in the volume and duration of volcanic activity at mid-ocean spreading centers for these Pacific and Atlantic ridge segments.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Chemical composition of upper crust in eastern China

In an area of 3.3×10⁶ km² within eastern China, 28 253 rock samples were collected systematically and combined into 2718 composite samples which were analyzed by 15 reliable methods using national preliminary certified reference materials (CRMs) for data quality monitoring. The average chemical compositions of the exposed crust, the sedimentary cover and the exposed basement as well as the upper crust for 76 chemical elements in eastern China are given. A key basic geology projcct supported by Ministry of Geology and Mineral Resources of China.     

Crustal structure of Dabieshan orogenic belt

The crustal structures ofP velocity and density on the deep seismic sounding profile across the Ilabieshan orogenic belt are presented. There is a 5-km-thick crustal “root” between the Yuexi and Xiaotian where the elevation is highest on the profile. An apparent Moho offset of 4. 5 km beneath the Xiaotian-Mozitan fault marks the paleo-suture of the Triassic collision. A high-velocity anomaly zone at the depth below 3 km beneath the ultra-high pressure (UHP) zone may be correlated to the higher content of UHP metamorphic rocks. Project supported by the National Natural Science Foundation of China and the Joint Earthquake Science Foundation.     

Numerical modeling of 3-D terrain effect on MT field

Using the boundary element method, the numerical modeling problem of three-dimensional terrain effect on magnetotelluric (MT) field is solved. This modeling technique can be run on PC in the case of adopting special net division. The result of modeling test for 2-D terrain by this modeling technique is basically coincident with that by 2-D modeling technique, but there is a great difference between the results of 3-D and 2-D modeling for 3-D terrain. Project supported by the National Natural Science Foundation of China.     

三维分块倾斜界面的反演及其应用

介绍了利用反射波走时反演介质层速度和包含直立断层的三维界面的计算方法．对各层界面利用多个倾斜或平界面方程来描述．给出了数值计算实例．结果表明，反演解与真模型很接近，说明计算方法是有效的．利用该方法处理了唐山地震区的ＰｍＰ反射波资料，获得了该区域莫霍界面的三维分块形态．唐山附近莫霍界面错断与该区域１９７６年唐山地震及一系列余震的发生有密切的联系．     

τ-P域地震资料三维叠前深度偏移及其实用算法

本文提出了在τ-P域实现三维叠前深度偏移的计算方法，该方法把地震道集由时-空域变换到τ-P域，然后对共P数据体进行相移或相移加插值偏移，将偏移后的各共P数据体叠加得到叠前深度偏移结果．该算法能够实现陡倾地层的正确归位，降低偏移处理维数，减少计算机内存需求，易于并行处理，但是计算量和所花费的计算机时间仍然很大．为此我们又提出了针对目的层的分时（层）偏移方法，由于只考虑目的层，可节省大量的计算时间．文中以二维实际地震资料及三维数值模型资料的处理说明了上述方法的可行性与有效性．