由ERS-1波形重构确定我国近海平均海平面

近海岸区域平均海面高在大地测量学、物理海洋学以及地球物理学研究中具有非常重要的意义.受各种条件的制约和限制,目前卫星测高技术主要应用于深海区域,在近海区域尤其是海岸线附近区域的应用几乎为空白.本文根据ERS-1测高卫星回波波形特征,采用五参数线性模型,由最小二乘拟合方法,对近海区域尤其是靠近海岸线附近的ERS-1测高波形数据进行波形重构.比较波形重构前、后解算平均海面高,表明波形重构技术不仅明显改善了解算近海海面高的精度,而且增加了近海测高海平面的分辨率,并使卫星测高有效观测延伸至海岸线附近.随后,本文利用波形重构后海面高数据构造了近海多年平均海平面,并对我国近海海平面特征进行了初步分析.     

古尔班通古特沙漠灌木冠幅预测模型

古尔班通古特沙漠是中国第二大沙漠,也是中国固定和半固定沙丘主要分布区,固沙灌木种较多。冠幅不仅是反映固沙灌木可视化的重要参数,也是反映沙漠植被生长情况的重要变量。以3种沙丘（固定沙丘、半固定沙丘和流动沙丘）上主要固沙灌木为研究对象,利用12种基础模型、BP(Backpropagation Neural Network)神经网络和支持向量机（Support Vector Machine,SVM）机器学习算法建立了基于固沙灌木株高和冠长率的冠幅预测模型,同时将两种机器学习算法拟合结果与基础模型进行比较,最终选出了适合研究区的冠幅预测模型。结果表明：（1）不同沙丘类型和不同灌木种类的最优冠幅预测模型不同,且固定沙丘和半固定沙丘模型优于流动沙丘。3种沙丘类型最优拟合为M2(Quadratic Model)模型;（2）白梭梭（Haloxylon persicum）在半固定沙丘和流动沙丘上拟合的最优模型分别为M2、M7(Gompertz),沙拐枣（Calligonum mongolicum）最优模型为M2,蛇麻黄（Ephedra distachya）和油蒿（Artemisia ordosica）在...     

Selection of sand models and identification of parameters using an enhanced genetic algorithm

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.     

Study on Flow Field Around Vertical Breakwater Under Different Overtopping Conditions Based on Numerical Simulation

A numerical wave flume is constructed based on the Reynolds Averaged Navier-Stokes (RANS) equations with turbulence closure by a modified k-ε model to study the viscous interactions of waves with vertical breakwaters for different overtopping cases. The governing equations,the turbulence model,boundary conditions,and solution method for the numerical wave flume are introduced briefly. The reliability of the numerical wave flume is examined by comparing the numerical results with the experimental measurement...     

Seismic stability analysis of piled embankments: A multiphase approach

The seismic stability analysis of an embankment lying over a soft foundation soil reinforced by a group of vertical piles is performed within the framework of the upper bound kinematic approach of yield design. The analysis is based on a previously developed ‘multiphase’ model of the reinforced ground, which explicitly accounts for the shear and bending resistances of the piles. Making use of appropriate failure mechanisms involving shear zones across which the reinforcements are continuously deforming, along with ‘plastic hinge’ surfaces, upper bound estimates to the critical seismic coefficient of the structure are derived. The results, which are confirmed by the simulations obtained from a finite element elastoplastic code, give clear evidence of the key role played by the bending strength capacities of the piles in ensuring the stability of the pile reinforced embankment. Copyright © 2009 John Wiley & Sons, Ltd.     

Explicit integration of bounding surface model for the analysis of earthquake soil liquefaction

This paper presents a new plasticity model developed for the simulation of monotonic and cyclic loading of non‐cohesive soils and its implementation to the commercial finite‐difference code FLAC, using its User‐Defined‐Model (UDM) capability. The new model incorporates the framework of Critical State Soil Mechanics, while it relies upon bounding surface plasticity with a vanished elastic region to simulate the non‐linear soil response. Stress integration of constitutive relations is performed using a recently proposed explicit scheme with automatic error control and substepping, which so far has been employed in the literature only for constitutive models aiming at monotonic loading. The overall accuracy of this scheme is evaluated at element level by simulating cyclic loading along complex stress paths and by using iso‐error maps for paths involving change of the Lode angle. The performance of the new constitutive model and its stress integration scheme in complex boundary value problems involving earthquake‐induced liquefaction is evaluated, in terms of accuracy and computational cost, via a number of parametric analyses inspired by the successful simulation of the VELACS centrifuge Model Test No. 2 studying the lateral spreading response of a liquefied sand layer. Copyright © 2009 John Wiley & Sons, Ltd.     

求解非线性有限元方程的弧长法及在工程稳定分析中的应用

本文讨论了求解非线性有限元方程弧长法的基本原理及具体实施,并应用于压杆及滑块的稳定性分析。由于弧长法具有确定并通过结构临界应力状态的临界荷载值,因此可以应用于工程稳定性分析。算例表明,弧长法确定的临界荷载值是令人满意的。     

钱塘江涌潮简析与预报

根据１９９１年观测资料，仑前潮位站出现涌潮１８４次，涌潮次数多少与江道地形变迁及上游下泄流量大小有关。涌潮高度在１．２－２．２ｍ之间，与涨潮潮差成正比。涌潮潮时预报方法有传播时间法和隔日滞后时间法。涌潮高度的预报，可根据当天涌潮高度预测后一天涌潮高度，也可根据下游站的涌潮高度预报上游站的涌潮高度。     

全球月平均高度距平场正斜压性的分析(I)--相关系数分布

利用欧洲中心全球客观分析的7层月平均位势高度距平资料,分别计算了相同格点上12-2月和6-8月各层高度距平之间的同时相关分布。结果表明:全球月平均位势高度距平场的正压、斜压性随地理区域变化很大,并有较明显的季节变化。其中12-2月对流层下部大气环流距平场在海洋上空有较好的相当正压性,在大陆上空正压性较差;对流层上部大气环流异常的正、斜压性分布与下部不同,赤道附近地区是相关系数的高值区,副热带地区主要是低值区;在对流层下部与上部大气环流距平场的相关系数分布图上,海洋上空并不总是高值区,在热带东太平洋区域就出现最强的负相关中心。与6-8月的相关系数分布型比较发现:特别明显的季节变化在非洲大陆和热带印度洋区域,12-2月为强正压区,6-8月为强斜压区。