东亚岛弧地形横剖面与板块运动

通过对东亚岛弧横剖面形态的系统分析，并结合弧前的构造应力的分析，作者认为，东亚岛弧形成于板块东移的构造环境中，横剖面形态存在两种基本类型即内缓外陡型和内陡外缓型，这两种不同的横剖面具有不同的弧前应力，前者表现弧前挤压，后者表现弧前引张，这反映地貌形态与构造应力之间的密切关系。     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

牙鲆鱼苗长途运输技术的试验研究

本实验对10个批次，总数为19047尾的不同规格和产地的牙鲆鱼苗长途运输效果进行了研究。结果表明，规格为9-12cm的鱼苗，在水温6－12℃，运输时间为35－50h，采用空运和低温活水车运输，运输死亡率为664尾，死亡率为3.39%，低温活水车短途运输是可行的，尽管长途车运方式成本较低，但由于应激强度较大，对鱼苗的生长性能影响较为严重，驯养10d累计死亡率最高达18.1%，这种模式不可取。低温（6℃）、小规格（9cm)的空运较适合牙鲆鱼苗长途运输。此外，本文还就运输应激反应、预防措施和药物防治进行详细的讨论。     

动力定位系统发展状况及研究方法

动力定位系统（Dynamic Positioning System)是一种闭环的控制系统，其采用推力器来提供抵抗风、浪、流等作用在船上的环境力，从而使船尽可能地保持在海平面上要求的位置上，其定位成本不会随着水深增加而增加，并且操作也比较方便。本文对动力定位系统发展及各组成部分进行了介绍，以期对动力定位系统有个比较完整的认识。     

Dynamic Response Behaviors of Upright Breakwaters Under Breaking Wave Impact

- The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impulse duration (or oscillation period) on the translation, rotation, sliding force, overturning moment, and corresponding dynamic amplifying factors are studied. It is concluded that the ampli-ying factors only depend on the ratio of the system natural period to impulse duration (or oscillation period) under a certain damping ratio. Moreover, the equivalent static approach to breakwater design is also discussed.     

An Experi mental Study on Wave-Induced Dynamic Stresses in Seabed

1 .IntroductionEvery year ,Taiwanis subjectedtotwo or three typhoonintrusions in average which always causedisasters . Most of the disasters which occur around the coastal zone are due to seabed instability andcoastal structure destruction caused bytyphoo…     

一类全局最优化问题的动态隧道方法

研究了连续变量函数的全局最优化问题 ,给出了动态隧道方法。该动态隧道方法由局部搜索和动态隧道 2个阶段构成。在局部搜索阶段用了动态系统方法。对全局最优化问题的实例进行了数值实验 ,数值结果表明了该方法的稳健性和有效性。     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

2021年10月山西一次罕见持续性强降水过程物理机制分析

利用气象观测资料、NCEP/NCAR 1°×1°再分析资料以及GDAS资料,对2021年10月2-7日山西持续性强降水天气过程进行分析。结果表明：稳定的乌拉尔山低槽后部冷空气扩散,中纬度短波槽东移,与副热带高压外围西南暖湿气流持续交汇,同时高低空急流耦合形成强烈上升运动,低层切变线和地面辐合线稳定维持,及低层水汽不断输送并形成辐合,为持续性强降水的发生发展提供有利动力和水汽条件。此次强降水过程分为对流性降水和稳定性降水2个阶段,2阶段水汽输送通道的源地、路径、高度均有明显差异,但水汽输送贡献率均以对流层中低层山西南侧的水汽输送占主导地位。降水开始前,对流层中上层存在对称不稳定,大气可降水量明显跃增;对流性降水阶段,干空气不断入侵,对流不稳定快速建立与释放,对流层中低层水汽辐合区与强上升气流配合,导致山西出现强对流天气。地形的阻挡、抬升及地形收缩作用,对局地极端强降水具有增幅作用。