高能级强夯在大型石化工程中的应用

大面积的多孔隙、粗颗粒非饱和土地基的加固处理宜采用强夯法。加固深厚地基,特别是大孔隙湿陷性地基、山区大厚度非均匀块石回填地基和抛石填海地基,应该施加高能级强夯进行处理。我国的高能级强夯主要用于石化工程施工中的生产装置和大型储罐地基。结合青岛重交沥青有限公司4座5万m3原油储罐和配套附属设施地基处理工程,对高能级强夯的关键技术、检测方法和综合评价进行了阐述,可供强夯设计施工参考。     

Pressure State in Deep Crust and Formation Depth of UHP Metamorphic Rocks

INTRODUCTIONSincethediscoveryofeclogiteswithcoesiteanddia mondinclusionsrelatedtothecontinent continentcollision orogenyenvironment,theultrahigh pressuremetamorphism(UHPM )intheDabie Suluhasarousedgreatinterestinmanygeologists (Liouetal .,1994 ;Xuetal.,1992 ) .Experimentalstudieshaveprovedthatsuchmineralsasdia mond ,coesiteandomphaciteoccurredat 2 - 5GPa (andatthecorrespondingtemperatures) (Stevenetal.,1982 ;MirwaldandMasonne ,1980 ) .However,itdoesnotmeanthatthemetamorphicrockscanbe…     

漳州热田地下热水的循环深度

漳州热田是我国东南沿海地区目前所见温度(121.5℃)最高的一个。热田地热地质、地球化学以及地温场的研究结果表明,漳州热田属于深循环对流型热田。为了计算热田的热水循环深度,本文采用管道模型的方法,利用热田中心钻孔的测温资料计算地下热水上涌的流速,利用热田内水化学资料计算热储温度,然后用图解法求出漳州热田热水的循环深度为3.4—4.0 km,为漳州热田的成因分析和热水资源的评价提供了依据。     

三工河流域222团竖井排灌区潜水动态分析

222团地处三工河流域冲洪积细土平原下游,40多年来的农业生产灌溉,使灌区大部分地区处于潜水临界埋深以上,土壤次生盐渍化加剧.分析了灌区潜水埋深动态特征及其影响因素,就竖井排灌区地下水开采量与潜水埋深关系进行回归分析计算,建立了开采量预测模型.     

极不充分采动条件下地表下沉规律及计算方法研究

随着煤矿开采的不断加深,地表呆动程度(开采宽度D与开采深度H之比DIH)不断降低,并逐渐趋向于极不充分采动,同样长度的工作面对地表的影响程度极不同于浅部开采。因此,需要重新认识深部开采时的地表下沉规律。极不充分采动条件下地表下沉规律具有特殊性。经过对国内外大量观测资料的综合分析,发现当开采宽度小于地表下沉起动距时(极不充分采动),地表的下沉或地表下沉率(q′／q)为零。当开采宽度达到地表移动起动距时,地表下沉缓慢增长;达到临界采动距时,地表下沉急剧增大。地表下沉率(q′／q)与开采宽、深比D／H之间为负指数函数关系。在极不充分采动条件下进行地表下沉预计时必须对概率积分法的下沉系数进行修正。算例证明了本文给出计算方法的可行性。但这种修正方法如何与概率积分法相统一仍需进一步研究。     

浙江省滑坡灾害预警预报的降雨阀值研究

根据浙江省降雨的特点,将降雨分为台风降雨和非台风降雨,采用统计方法研究了区域性滑坡灾害与台风区和非台风区降雨量及降雨强度的相关性,通过相关性分析确定了有效降雨量模型;得到了浙江省区域性滑坡发生的临界降雨量和降雨强度阀值,为实时时间预警提供了定量依据;将滑坡灾害的空间易发性与降雨量和降雨强度相结合确定了滑坡灾害的空间预警区划指标和等级;最后初步研究了滑坡发生的滞后时间。     

安徽淮北煤矿富水区被动式超低频电磁探测结果解析

被动式超低频电磁法是一种在地表直接接收来自地下3～3000Hz频段的天然超低频电磁信号,通过对接收信号的处理和解释实现对地下的岩性界面、构造、资源和能源进行探测,拥有巨大开发潜力的地球物理勘探新方法.首先简述了富水区的被动式超低频电磁探测机理,其次结合安徽省淮北市煤矿富水区的探测实例来说明该方法的适用性和局限性.在数据处理上采用曲线叠加平均、平滑和特征深度标定的方法,同时采用了测深曲线和视电阻率等值断面进行地质解释.解释结果和已知钻孔资料对比发现,无论在测深曲线上,还是在断面图上,富水区均具有明显的特征.     

Aerosol optical depths at Mohal-Kullu in the northwestern Indian Himalayan high altitude station during ICARB

First time observations of spectral aerosol optical depths (AODs) at Mohal (31.9°N, 77.11°E; altitude 1154 m amsl) in the Kullu valley, located in the northwestern Indian Himalayan region, have been carried out during Integrated Campaign for Aerosols, gases and Radiation Budget (ICARB), as a part of the Indian Space Research Organisation-Geosphere Biosphere Program (ISRO-GBP). AODs at six wavelengths are obtained using Microtops-II Sunphotometer and Ozonometer. The monthly mean values of AOD at 500 nm are found to be 0.27 ± 0.04 and 0.24 ± 0.02 during March and April, 2006 respectively. However, their monthly mean values are 0.33 ± 0.04 at 380 nm and 0.20 ± 0.03 nm at 870 nm during March 2006 and 0.31 ± 0.3 at 380 nm and 0.17 ± 0.2 at 870 nm during April 2006, showing a gradual decrease in AOD with wavelength. The Ångstrom wavelength exponent ‘α’ had a mean value of 0.72 ± 0.05, implying reduced dominance of fine particles. Further, the afternoon AOD values are higher as compared to forenoon values by ～ 33.0% during March and by ～ 9.0% during April 2006 and are attributed to the pollutant lifted up from the valley by the evolving boundary layer. Besides the long-range transportation of aerosol particles by airmass from the Great Sahara and the Thar Desert regions to the observing site, the high values of AODs have also been influenced by biomass burning and frequent incidents of forest fire at local levels.     

Global Correlations of Ocean Ridge Basalt Chemistry with Axial Depth: a New Perspective

The petrological parameters Na₈ and Fe₈, which are Na₂O andFeO contents in mid-ocean ridge basalt (MORB) melts correctedfor fractionation effects to MgO = 8 wt%, have been widely usedas indicators of the extent and pressure of mantle melting beneathocean ridges. We find that these parameters are unreliable.Fe₈ is used to compute the mantle solidus depth (P_o) and temperature(T_o), and it is the values and range of Fe₈ that have led tothe notion that mantle potential temperature variation of T_P= 250 K is required to explain the global ocean ridge systematics.This interpreted T_P = 250 K range applies to ocean ridges awayfrom ‘hotspots’. We find no convincing evidencethat calculated values for P_o, T_o, and T_P using Fe₈ have anysignificance. We correct for fractionation effect to Mg^# = 0·72,which reveals mostly signals of mantle processes because meltswith Mg^# = 0·72 are in equilibrium with mantle olivineof Fo_89·6 (vs evolved olivine of Fo_{88·1–79·6}in equilibrium with melts of Fe₈). To reveal first-order MORBchemical systematics as a function of ridge axial depth, weaverage out possible effects of spreading rate variation, local-scalemantle source heterogeneity, melting region geometry variation,and dynamic topography on regional and segment scales by usingactual sample depths, regardless of geographical location, withineach of 22 ridge depth intervals of 250 m on a global scale.These depth-interval averages give Fe₇₂ = 7·5–8·5,which would give T_P = 41 K (vs 250 K based on Fe₈) beneathglobal ocean ridges. The lack of Fe₇₂–Si₇₂ and Si₇₂–ridgedepth correlations provides no evidence that MORB melts preservepressure signatures as a function of ridge axial depth. We thusfind no convincing evidence for T_P > 50 K beneath globalocean ridges. The averages have also revealed significantcorrelations of MORB chemistry (e.g. Ti₇₂, Al₇₂, Fe₇₂,Mg₇₂, Ca₇₂, Na₇₂ and Ca₇₂/Al₇₂) with ridge axial depth. Thechemistry–depth correlation points to an intrinsic linkbetween the two. That is, the 5 km global ridge axial reliefand MORB chemistry both result from a common cause: subsolidusmantle compositional variation (vs T_P), which determines themineralogy, lithology and density variations that (1) isostaticallycompensate the 5 km ocean ridge relief and (2) determine thefirst-order MORB compositional variation on a global scale.A progressively more enriched (or less depleted) fertileperidotite source (i.e. high Al₂O₃ and Na₂O, and low CaO/Al₂O₃)beneath deep ridges ensures a greater amount of modal garnet(high Al₂O₃) and higher jadeite/diopside ratios in clinopyroxene(high Na₂O and Al₂O₃, and lower CaO), making a denser mantle,and thus deeper ridges. The dense fertile mantle beneath deepridges retards the rate and restricts the amplitude of the upwelling,reduces the rate and extent of decompression melting, givesway to conductive cooling to a deep level, forces melting tostop at such a deep level, leads to a short melting column,and thus produces less melt and probably a thin magmatic crustrelative to the less dense (more refractory) fertile mantlebeneath shallow ridges. Compositions of primitive MORB meltsresult from the combination of two different, but geneticallyrelated processes: (1) mantle source inheritance and (2) meltingprocess enhancement. The subsolidus mantle compositional variationneeded to explain MORB chemistry and ridge axial depth variationrequires a deep isostatic compensation depth, probably in thetransition zone. Therefore, although ocean ridges are of shalloworigin, their working is largely controlled by deep processesas well as the effect of plate spreading rate variation at shallowlevels. KEY WORDS: mid-ocean ridges; mantle melting; magma differentiation; petrogenesis; MORB chemistry variation; ridge depth variation; global correlations; mantle compositional variation; mantle source density variation; mantle potential temperature variation; isostatic compensation     

浅谈纯住宅楼梯的进深与合理布置

住单元楼的人可能每天都在往来于住宅楼梯间,作为一种不可缺少的交通工具,对人的行为起作很重要的作用。随着社会的发展,住户对住宅楼梯间的感知也越来越不同,在设计上我们应将它设计得更加合理、严谨、优化、规范化、科学化,让它成为更具人性化的交通工具。