近年来我国冰流动研究进展

本简要介绍我国学１９８７年以来在国内外冰流动理论和试验研究中取得的进展，包括晶粒长大规律、异向性冰的第三蠕变、压剪联合作用下冰的流动以及全新世冰和冰期冰流动性质的差别等，并加以评论。     

则木河断裂的现今活动方式及其地形变鉴别标志探讨

根据地壳形变测量资料，探讨了则木河断裂的现今活动方式及其定性的地形变鉴别标志问题。结果表明：则木河断裂的现今活动具有明显的分段性特征，即以大箐为界分为南北两段，北段以粘滑活动为主，南段以蠕滑活动为主；沿则木河断裂带垂直位移速率空间分布特征的显著差异，可以作为鉴别断裂现今活动方式的标志之一，其位移速率的相对大小，可作为鉴别断裂现今活动方式的一种参考标志     

大灰厂跨断层形变资料的地震信息识别

利用具有明显物理意义的断层蠕动模型在充分考虑可能存在的干扰因素影响的基础上，对大灰石台跨断层地形变资料在１９８９年大同地震前后出现的较大幅度变化进行了异常属性分析。结果表明，这个时期的异常变化尽管叠加有一定的降雨影响，但蠕动模型计算得出的地表变化理论值与实际变化有一定程度的符合，显示出在区域应力场作用下，八宝山断层局部地段在大同地震前后可能存在着与区域应力场应力增强及应力调理有关的构造活动。     

Nonlinear numerical method for earthquake site response analysis II — case studies

This paper presents two numerical case studies of medium and strong motion events, namely Loma-Prieta 1989 and Hyogoken-Nambu (Kobe) 1995. These simulations were performed using CyberQuake model. The cyclic elastoplastic constitutive model is fully detailed in the companion paper. Through these case studies, we demonstrate the importance of using appropriate constitutive modelling when the part played by nonlinear phenomena is preponderant. The need to account for 3D kinematics (i.e. the three components of the input motion), is also demonstrated, even though a 1D geometry is considered, as the plastic coupling existing between components of motion during the earthquake, strongly affects the seismic soil response.     

土的可恢复剪胀的一种解释

从土的各向异怀角度对土的可恢复剪胀现象进行了解释。基于各向异性情况下的土体弹性本构关系理论分析，认为土的可恢复剪胀现象可部分归因于土的各向异性引起的弹性剪胀。借助有关土体弹性参数实验结果，研究了应力诱导各迥异性对土体弹性剪胀的影响，结果表明：随土体应力诱导各向异性的增大，土体的弹性剪胀也增大。从土体弹性剪胀角度研究了土的卸荷体缩条件，认为土体卸荷体缩取决于加载应力路径的应力增量比，给出了土体出现卸荷体缩的区域。     

镍锗尖晶石位错域的高温蠕变实验研究

利用人工合成的多晶材料研究了镍锗尖晶石在位错域的高温蠕变性质.多晶材料的颗粒尺寸约8μm.单轴压缩试件为圆柱状,使用气体介质围压筒.常压蠕变试验过程中,围压为300MPa,温度为1373-1523K,应力在55-330MPa范围内.从实验结果得出了镍锗尖晶石在位错域的流动律,应力指数n=29±01,表明流动的微观机制为位错蠕变.与其他尖晶石进行对比可以发现一个力学同构群,虽然在正尖晶石和反尖晶石之间存在一定的差异.在位错蠕变域,尖晶石与橄榄石归一化的强度类似.由于尖晶石的剪切模量比橄榄石高50%,其实际强度也比橄榄石高.将橄榄石和尖晶石的蠕变数据外推到地球内部条件时,由于其高应力指数,橄榄石则有可能比尖晶石的强度高.     

粘弹性介质中的地震波

给出了三元件的标准线性粘弹性固体在半平面内传播的地震波的解析解，它是由已知的弹性半平面内的解析解迭粘滞性解而得，从而克服了视地壳为二元件粘弹性体的Voigt模型或Maxell模型的缺点。     

High-temperature creep in a Ni2GeO4: a contribution to creep systematics in spinel

 High-temperature creep behavior in Ni₂GeO₄ spinel was investigated using synthetic polycrystalline aggregates with average grain sizes ranging from submicron to 7.4 microns. Cylindrical samples were deformed at constant load in a gas-medium apparatus at temperatures ranging from 1223 to 1523 K and stresses ranging from 40 to 320 MPa. Two deformation mechanisms were identified, characterized by the following flow laws: where σ is in MPa, d is in μm and T is in Kelvin. These flow laws suggest that deformation was accommodated by dislocation creep and grain-boundary diffusion (Coble) creep, respectively. A comparison with other spinels shows that an isomechanical group can be defined for spinels although some differences between normal and inverse spinels can be identified. When creep data for olivine and spinel are normalized and extrapolated to Earth-like conditions, spinel (ringwoodite) has a strength similar to olivine in the dislocation creep regime and is considerably stronger than olivine in the diffusion creep regime at coarse grain size. However, when grain-size reduction occurs, spinel can become weaker than olivine due to its high grain-size sensitivity (Coble creep behavior). Analysis of normalized diffusion creep data for olivine and spinel indicate that spinel is weaker than olivine at grain sizes less than 2 μm. Received: 18 June 2000 / Accepted: 3 April 2001