基于跨断层监测资料的金州断裂活动性研究

利用金州地震台跨断层形变观测资料分析金州断裂现今活动特征.长趋势分析结果表明,金州断裂以右旋兼正断为主,活动水平总体较弱.断裂活动分段分析结果表明,北段活动速率高于南段.GPS资料分析表明,2011-03-11日本MW9.1地震对东北地区应力积累具有缓解作用,结合金州断裂跨断层数据认为,金州断裂在2011～2014年活...     

The experimental study of acoustic emission during creep of rocks

Under normal temperature, the creep experiments with complete samples of Gabbro and Marble rocks are made under uniaxial compression. It is found that at the instantaneous creeping stage, AE activities increase with loading; at the steady creeping stage, large AE signals may appear at lower background of AE action, andm—value which shows the relationship between AE amplitude and frequency keeps stable on the low value or decreases; at the accelerate creeping stage, AE activities increase andm—value decreases quickly or decreases again after recovery. These experimental results are related to the quality of the samples. In this paper, AE activities during three stages of creeping process are connected with the seismic patterns (for exampleb—value, foreshocks). Finally, it is pointed out the possibility that the foreshock—mainshock—aftershock earthquake sequence has been formed by the mechanism of creep fracture of crustal rocks. The Chinese version of this paper appeared in the Chinese edition ofActa Seismologica Sinica,13, 104–112, 1991. This subject is sponsored by the Chinese Joint Seismological Science Foundation.     

An approach to the modeling of viscoelastic damage. Application to the long‐term creep of gypsum rock materials

A three‐dimensional phenomenological model is developed to describe the long‐term creep of gypsum rock materials. The approach is based on the framework of continuum damage mechanics where coupling with viscoelasticity is adopted. Specifically, a local damage model based on the concept of yield surface is proposed and deeply investigated. Among the many possibilities, we choose in this work its coupling with a generalized Kelvin–Voigt rheological model to formulate the whole behavior. Long‐term as well as short‐term relaxation processes can be integrated in the model by means of as many as necessary viscoelastic processes. The numerical discretization is described for an easy integration within a finite element procedure. Finally, a set of numerical simulations is given to show the possibilities of the presented model. It shows good agreement with some experimental results found in the literature. Copyright © 2012 John Wiley & Sons, Ltd.     

Nonequilibrium thermodynamics of pressure solution

This paper is concerned with the thermodynamic theory of solution and precipitation processes in wet crustal rocks and with the mechanism of steady pressure-solution slip in contact zones, such as grain-to-grain contacts, fracture surfaces, and permeable gouge layers, that are infiltrated by a mobile aqueous solution phase. A local dissipation jump condition at the phase boundary is fundamental to identifying the thermodynamic force driving the solution and precipitation process and is used here in setting up linear phenomenological relations to model near-equilibrium phase transformation kinetics. The local thermodynamic equilibrium of a stressed pure solid in contact with its melt or solution phase is governed by Gibbs's relation, which is rederived here, in a manner emphasizing its independence of constitutive assumptions for the solid while neglecting surface tension and diffusion in the solid. Fluid-infiltrated contact zones, such as those formed by rough surfaces, cannot generally be in thermodynamic equilibrium, especially during an ongoing process of pressure-solution slip, and the existing equilibrium formulations are incorrect in overlooking dissipative processes tending to eliminate fluctuations in superficial free energies due to stress concentrations near asperities, defects, or impurities. Steady pressure-solution slip is likely to exhibit a nonlinear dependence of slip rate on shear stress and effective normal stress, due to a dependence of the contact-zone state on the latter. Given that this dependence is negligible within some range, linear relations for pressure-solution slip can be derived for the limiting cases of diffusion-controlled and interface-reaction-controlled rates. A criterion for rate control by one of these mechanisms is set by the magnitude of the dimensionless quantityk/2C _pD, wherek is the interfacial transfer coefficient, is the mean diffusion path length,C _p is the solubility at pressurep, andD is the mass diffusivity.     

粘弹性介质中的地震波

给出了三元件的标准线性粘弹性固体在半平面内传播的地震波的解析解，它是由已知的弹性半平面内的解析解迭粘滞性解而得，从而克服了视地壳为二元件粘弹性体的Voigt模型或Maxell模型的缺点。     

常州地区含水层系统土层压缩变形特征研究

根据近十几年来分层标和含水层水位观测资料分析了常州地区土层压缩变形特征,表明承压含水砂层中的压缩变形不容忽视,且含水砂层的压缩变形与弱透水层的粘土、粉质粘土相似,均表现出明显的变形滞后现象.为此从水位与时间关系、土层变形与时间关系和水位与变形关系出发,结合室内试验方法,通过选取常州地区含水层系统中第一、二、三承压含水层以及二、三承压含水层间弱透水层和第三承压含水层下覆弱透水层的原状土样,采用单轴侧限压缩试验,分析了常州地区砂土和粉质粘土的次固结（蠕变）特性.试验结果表明常州地区不论是粉质粘土还是砂土,均存在一定的次固结变形,从而启示我们该地区地面沉降模拟中应同时考虑含水砂层的蠕变特性.     

双轴压缩条件下绿片岩的蠕变规律研究

在锦屏二级水电站辅助洞绿片岩的双轴压缩蠕变试验结果的基础上,研究了应力路径对双轴压缩蠕变变形的影响。结果表明:当侧向应力相同时,随着轴向应力的增加,轴向稳态蠕变阶段的变形速率逐渐增加;当轴向应力相同时,随着侧向应力的增加,轴向稳态蠕变阶段的变形速率逐渐减小。     

软岩的强度—变形—时间之间关系的试验分析

对软岩和有不连续面的软岩试样进行一系列固结不排水三轴压缩和蠕变试验,测定并分析了它们在正常固结和超固结状态下的应变软化性状、蠕变特性和残余强度的变化规律。探讨了软岩中存在的不连续面对应力－应变关系、残余强度特性和蠕变应变速率的影响。     

High-temperature creep in a Ni2GeO4: a contribution to creep systematics in spinel

 High-temperature creep behavior in Ni₂GeO₄ spinel was investigated using synthetic polycrystalline aggregates with average grain sizes ranging from submicron to 7.4 microns. Cylindrical samples were deformed at constant load in a gas-medium apparatus at temperatures ranging from 1223 to 1523 K and stresses ranging from 40 to 320 MPa. Two deformation mechanisms were identified, characterized by the following flow laws: where σ is in MPa, d is in μm and T is in Kelvin. These flow laws suggest that deformation was accommodated by dislocation creep and grain-boundary diffusion (Coble) creep, respectively. A comparison with other spinels shows that an isomechanical group can be defined for spinels although some differences between normal and inverse spinels can be identified. When creep data for olivine and spinel are normalized and extrapolated to Earth-like conditions, spinel (ringwoodite) has a strength similar to olivine in the dislocation creep regime and is considerably stronger than olivine in the diffusion creep regime at coarse grain size. However, when grain-size reduction occurs, spinel can become weaker than olivine due to its high grain-size sensitivity (Coble creep behavior). Analysis of normalized diffusion creep data for olivine and spinel indicate that spinel is weaker than olivine at grain sizes less than 2 μm. Received: 18 June 2000 / Accepted: 3 April 2001     

Time-dependent behaviour of the rock mass

Summary The strength of intact rock and the rock mass is time-dependent. For intact rock experimental verification is available, for the rock mass the scale of time-dependence is a matter of judgement. Rock mass classifications do however emphasize the effect of time on tunnel stability. This paper examines the source of time-dependence in rocks and the rock mass and suggests a technique for estimating the long term strength. The long term strength of the rock mass is controlled by the time-dependent weakening of intact rock. Frictional resistance, a major source of rock mass strength, increases rather than decreases with time. Lifetime estimation for rocks can be accomplished phenomenologically or mechanistically. The first is a statistical process of wide applicability, the second is more restrictive in usage as its applies only to materials that suffer time-dependent strain (creep). Although the mechanistic route is more appealing, it has a major drawback as it concentrates on steady state creep. There is no strong evidence for steady state creep in rocks. The technique for long term prediction is developed through the analysis of the failure rate under constant load. The failure rate for a given load and environment is established from the frequency distribution of time-to-failure data as measured in static fatigue tests. As expected, the failure rate is strongly affected by both the loading and the environmental condition. The influence, however, is systematic and predictable.