油水两相渗流多孔介质弹性波传播动力学模型研究

弹性波在储层渗流场中的传播与衰减规律是研究波场强化采油动力学机理的重要基础.基于等效流体理论和饱和静态流体弹性波传播Biot理论,建立油水两非混相流体渗流条件下储层多孔介质中弹性波传播的动力学模型,通过算例求解与分析,发现含油水两相渗流储层多孔介质中同时存在着3种纵波P1、P2、P3和1种横波S;受频率和含水饱和度的影响,各波波速和品质因子呈现出不同变化规律,4种体波波速与频率、饱和度正相关,P1、P2波品质因子与饱和度正相关,P3和S波品质因子与饱和度负相关;最后,通过与传统静态弹性波模型结果对比,进一步分析了宏观渗流场对弹性波传播特征的影响规律,为揭示低频人工地震波辅助强化采油技术的动力学机理和工艺参数优化提供了重要理论依据.

     

A semi-empirical approach to model pressure dependence of elastic moduli in granular media accounting for variations of coordination-number and Poisson-ratio

The effective medium theory based on the Hertz–Mindlin contact law is the most popular theory to relate dynamic elastic moduli (or elastic velocities) and confining pressure in dry granular media. However, many experimental results proved that the effective medium theory predicts pressure trends lower than experimental ones and over-predicts the shear modulus. To mitigate these mispredictions, several evolutions of the effective medium theory have been presented in the literature. Among these, the model named modified grain contact theory is an empirical approach in which three parametric curves are included in the effective medium theory model. Fitting the parameters of these curves permits to adjust the pressure trends of the Poisson ratio and the bulk modulus. In this paper, we present two variations of the modified grain contact theory model. First, we propose a minor modification in the fitting function for the porosity dependence of the calibration parameters that accounts for non-linearity in the vicinity of the critical porosity. Second, we propose a major modification that reduces the three-step modified grain contact theory model to a two-step model, by skipping the calibration parameter–porosity fit in the model and directly modelling the calibration parameter–pressure relation. In addition to an increased simplicity (the fitting parameters are reduced from 10 to 6), avoiding the porosity fit permits us to apply the model to laboratory data that are not provided with accurate porosity measurements. For this second model, we also estimate the uncertainty of the fitting parameters and the elastic velocities. We tested this model on dry core measurements from literature and we verified that it returns elastic velocity trends as good as the original modified grain contact theory model with a reduced number of fitting parameters. Possible developments of the new model to add predictive power are also discussed.     

Isolation of plane shear wave using water saturated trench barrier

The article presents a theoretical investigation of the propagation of normally and obliquely incident plane shear waves past a rectangular trench filled up with water saturated soil sandwiched between anisotropic elastic media. The motivation for this work is due to the effectiveness of the isolation of waves by the in-filled rectangular trench. Unlike the most of the previous researchers, this model considers the soil–structure interaction effects and directly determines the influence of barrier in the form of in-filled trench on the mode of wave propagation. It is of interest to determine the reflection and transmission coefficients, and the energy partition distribution of shear waves in the in-filled rectangular trench showing the influence of barrier on the propagation of waves. An extensive parametric study through numerical computation is carried out to investigate the influence of the material properties of the in-filled trench and the amplitude ratios on shear waves. The in-filled trench barrier directly declines the intensity of waves significantly in such a way that the waves do not create any hazards to the nearby structures, if exists at all.     

Structure of residual oil as a function of wettability using pore-network modelling

In the water flooding of mixed-wet porous media, oil may drain down to relatively low residual oil saturations (S_or). Various studies have indicated that such low saturations can only be reached when oil layers in pore corners are included in the pore-scale modelling. These processes within a macroscopic porous medium can be modelled at the pore-scale by incorporating the fundamental physics of capillary dominated displacement within idealised pore network models. Recently, the authors have developed thermodynamic criteria for oil layer existence in pores with non-uniform wettability which takes as input geometrically and topologically representative networks, to calculate realistic S_or values for mixed-wet and oil-wet sandstones [16, 21]. This previous work is developed in this paper to include (i) the visualisation of the 3D structure of this residual oil, and (ii) a statistical analysis of this “residual/remaining” oil. Both the visualisation and the statistical analysis are done under a wide range of wettability conditions, which is reported for the first time in this paper.The structure of residual oil for strongly water wet systems is well known (where residual = remaining oil) and our model agrees with this but this structure changes radically for mixed wet systems (where residual ≠ remaining) and this has not yet been visualised experimentally. We find that for more water-wet systems high final residual oil saturations are reached at relatively small amounts of water injected and this oil is present in the pores as bulk oil. On the other hand, for more oil-wet systems we find a slow decrease of the amount of remaining oil with increasing amounts of injected water. During the process, the remaining connectivity of the oil phase is increasingly provided by oil layers only, hence the slow drainage. The final residual oil saturation, only reached in the theoretical limit of an infinite amount of injected water, is almost entirely contained in large number of (relatively low volume) oil layers, which are present in pores of most radius sizes.     

The effect of microporosity on transport properties in porous media

Sizeable amounts of connected microporosity with various origins can have a profound effect on important petrophysical properties of a porous medium such as (absolute/relative) permeability and capillary pressure relationships. We construct pore-throat networks that incorporate both intergranular porosity and microporosity. The latter originates from two separate mechanisms: partial dissolution of grains and pore fillings (e.g. clay). We then use the reconstructed network models to estimate the medium flow properties. In this work, we develop unique network construction algorithms and simulate capillary pressure–saturation and relative permeability–saturation curves for cases with inhomogeneous distributions of pores and micropores. Furthermore, we provide a modeling framework for variable amounts of cement and connectivity of the intergranular porosity and quantifying the conditions under which microporosity dominates transport properties. In the extreme case of a disconnected inter-granular network due to cementation a range of saturations within which neither fluid phase is capable of flowing emerges. To our knowledge, this is the first flexible pore scale model, from first principles, to successfully approach this behavior observed in tight reservoirs.     

Rayleigh波的频散方程高频近似分解和多模式激发数目

对于在Rayleigh波勘探中经常提取到的多模式频散曲线,如何在理论上对其特征进行描述是一个很有意义的问题. 本文根据Rayeigh波频散方程中传递矩阵具有的高频近似特征,提出了传递矩阵的高频近似分解公式,据此导出了频散方程的高频近似分解公式,并在此基础上,定义了Rayleigh波的4种基本模式(R模、S模、R型周期模和S型周期模). 根据频散方程具有的周期性特征,给出了周期模频散曲线之间的平均间隔近似公式,以及在任意频率和相速度段内频散方程根的数目（即多模式的激发数目）的预测公式. 在这些结果的基础上,本文最后提出了频散方程数值搜根的一种新方法.     

局部角度域波传播步进算法研究

本文从非均匀介质中波动方程出发,提出了基于一般标架的相空间（局部角度域）波传播的步进算法. 该方法在构造单程波的步进算法时,在选择标架或正交基等方面有更大的自由度. 我们以不随频率及深度变化且具有变尺度特性的Gabor_Daubechies紧标架为例,给出了单程波传输算子的具体形式及相应的波场步进算法;详细讨论了基于Gabor_Daubechies标架的传输算子的高频渐近展开问题,得出了在高频、小传输步长条件下传输算子的近似解析表达式,并给出使用条件. 通过模型算例,比较了精确传输算子与高频近似传输算子用于非均匀介质中波传播的结果,说明在一定条件下由两者得出的波场几乎是相同的.     

TTI介质的相速度研究

推导了二维TTI介质的相速度表达式,并且依据推导出来的相速度表达式,模拟并分析了二维TTI介质相速度的传播快照以及TI介质相速度的传播快照;对比并分析了TTI介质和TI介质模型的相速度理论计算值的X分量特征的差异。TTI介质的相速度研究具有较高的理论研究价值和实际应用价值．     

含泥质低孔渗各向异性黏弹性介质中的波频散和衰减研究

本文定义了各向异性黏弹性参数修正因子,并将其引入到黏弹性模型中以体现泥质含量对黏弹性机制的影响,同时将波传播过程中孔隙介质骨架黏弹性力学机制与两种孔隙流体流动力学机制（Biot流动和喷射流动机制）有机地统一起来处理,从而给出了描述含泥质低孔渗孔隙各向异性介质中波传播规律的黏弹性Biot/squirt (BISQ)模型.数值计算结果表明,入射波的方位角、各向异性渗透率以及泥质含量等对含流体复杂孔隙介质中波频散和衰减的影响具有显著的方位各向异性特征,在低频范围内（地震波勘探频率）黏弹性力学机制对波传播能量的衰减起主导作用.     

含气介质临界点、流体和骨架弹性参数的数值计算方法

目前临界孔隙度及孔隙介质的研究主要为测试分析的实验方法,如何运用数值计算方法求取孔隙流体介质临界点和组分弹性参数一直是备受关注的课题.本文提出了求取孔隙介质临界点、孔隙内流体和骨架弹性参数的数值计算公式及方法,并结合含气样品测试数据实现了这种数值计算.文章首先给出了3个包含孔隙度的线性方程,通过有机组合每个线性方程中的两个系数得到求取有关弹性参数的数值计算公式.然后,详细阐述了计算的方法和步骤以及需要注意的问题,把室内含气砂岩样品实测的综合介质密度、纵波速度和横波速度作为数值计算的输入数据,求得了临界点和流体及骨架等相关弹性参数的具体数值.通过比较分析本文数学方法求得的计算数据与实验方法测得的实测数据,表明了该数值计算公式的正确性和数值实现方法的有效性.