房产测量中面积测算问题探讨

房产测量成果是为产权产籍管理、开发管理、交易管理和拆迁管理服务,是为城市规划和城市建设等提供基础数据和资料的重要基础性工作,得到全社会的关注。本文对房产测量中房屋面积测算过程经常遇到的问题进行了探讨,并提出了一些解决的建议。     

Cohesive Crack Analysis of Toughness Increase Due to Confining Pressure

Apparent fracture toughness in Mode I of microcracking materials such as rocks under confining pressure is analyzed based on a cohesive crack model. In rocks, the apparent fracture toughness for crack propagation varies with the confining pressure. This study provides analytical solutions for the apparent fracture toughness using a cohesive crack model, which is a model for the fracture process zone. The problem analyzed in this study is a fluid-driven fracture of a two-dimensional crack with a cohesive zone under confining pressure. The size of the cohesive zone is assumed to be negligibly small in comparison to the crack length. The analyses are performed for two types of cohesive stress distribution, namely the constant cohesive stress (Dugdale model) and the linearly decreasing cohesive stress. Furthermore, the problem for a more general cohesive stress distribution is analyzed based on the fracture energy concept. The analytical solutions are confirmed by comparing them with the results of numerical computations performed using the body force method. The analytical solution suggests a substantial increase in the apparent fracture toughness due to increased confining pressures, even if the size of the fracture process zone is small.     

Differences Between Mode I and Mode II Crack Propagation

Although mode I and mode II crack propagation show many similarities, in particular when analysed by linear elastic fracture mechanics, they differ significantly in the micro-structural behaviour. These differences, which are clearly noticeable in the fracture surface morphology, lead to fundamental differences in the macroscopic behaviour. Thus, mode II crack expansion under remote loading, appears to obey micro-structural scaling laws, implying that the dimensions of the process region stay essentially constant during crack expansion, rather than increasing with crack length. Therefore, expanding mode II cracks can almost reach the Rayleigh velocity, and actually also intersonic velocities. An expanding mode I crack, on the other hand, seems to obey continuum scaling laws, implying that the dimensions of the process region increase in proportion to crack length, leading to self-similar crack expansion at a velocity significantly below the Rayleigh speed and dependent on the remote load.     

“醉汉林”作为滑坡和边坡变形特征标志的意义——以陕西陇县地区为例

“醉汉林”一般被当做滑坡存在的一种标志。在陕西宝鸡地区进行地质灾害详细调查的过程中,发现变形边坡也有“醉汉林”分布。对陕西陇县郭家庄变形边坡“醉汉林”的树木倾斜角与边坡的倾角进行了测量,并结合几何学分析,认为树木倾斜角反映了边坡倾角的变化,并得出边坡倾角不断变陡是该地区边坡变形的一种主要方式的结论。研究结果表明,“醉汉林”有着多样而具体的指示意义:“醉汉林”记录了边坡变形的历史,可以作为区分滑坡与变形边坡的标志,“醉汉林”可以指示滑坡及边坡的状态,还可以判断滑坡剪出口是否存在。     

根据含超压气体裂隙震源模式讨论P波初动符号的分布

利用含超压气体裂隙震源模式［１］分析研究了Ｐ波初动符号的分布．根据理论推导,不同倾角含超压气体裂隙可分别形成Ｐ波初动符号的四象限分布图象和圆、椭圆、抛物线、双曲线等圆锥曲线形Ｐ波节线．按节线形状和失稳方式进行了地震分类．所推论的初动Ｐ波、Ｓ波振幅分布规律和地形变特征都与实际相符     

Coupled HM analysis using zero‐thickness interface elements with double nodes—Part II: Verification and application

In a companion Part I of this paper (Int. J. Numer. Anal. Meth. Geomech. 2008; DOI: 10.1002/nag.735 ), a coupled hydro‐mechanical (HM) formulation for geomaterials with discontinuities based on the finite element method (FEM) with double‐node, zero‐thickness interface elements was developed and presented. This Part II paper includes the numerical solution of basic practical problems using both the staggered and the fully coupled approaches. A first group of simulations, based on the classical consolidation problem with an added vertical discontinuity, is used to compare both the approaches in terms of accuracy and convergence. The monolithic or fully coupled scheme is also used in an application example studying the influence of a horizontal joint in the performance of a reservoir subject to fluid extraction. Results include a comparison with other numerical solutions from the literature and a sensitivity analysis of the mechanical parameters of the discontinuity. Some simulations are also run using both a full non‐symmetric and a simplified symmetric Jacobian matrix. On top of verifying the model developed and its capability to reflect the conductivity changes of the interface with aperture changes, the results presented also lead to interesting observations of the numerical performance of the methods implemented. Copyright © 2008 John Wiley & Sons, Ltd.     

DEM analyses of crack propagation in flawed rock mass under uniaxial compressionEI北大核心CSCD

A contact model for rock is established and imbedded into a DEM software by summarizing the bond granule tests. DEM simulation of uniaxial compression test on the pre-cracked Lac du Bonnet granite is performed, and then stress distributions are further analyzed and compared with the theoretical results. Different fracture criteria are employed to predict the crack initiation angles that are compared with theoretical ones. The results show that the failure modes obtained from DEM simulation are similar to experimental results, and stress distributions in DEM simulation are qualitatively similar to theoretical values. When the angle of pre-crack is small, the lateral stresses are compressive and tensile. The compressive strains concentrate at two edges, resulting in the tensile strains in the up-and downward cracks. When the angle of the pre-crack is large enough, the stress concentration is unobvious, leading to a discrepancy between the DEM and theoretical results. The crack extension angle resulting from uniaxial compression measured from DEM tests are in good agreement with those acquired from experimental tests. These angles are consistent with theoretical predictions by the maximum circumferential stress criterion and the maximum energy release rate criterion.     

水平轴潮流能叶轮尖速比特性分析研究

针对设计尖速比对水平轴潮流能叶轮动力特性的影响问题开展研究工作。基于叶素-动量理论建立叶轮动力特性仿真模型,以叶片数量分别为2、3、4的叶轮为对象,考察设计尖速比对叶轮的功率系数的影响。研究结果表明:设计尖速比越大的叶轮,其最大效率也越高;叶片数量多的叶轮,其功率系数略优于叶片数量少的叶片。结合分析结果,给出了水平轴潮流能叶轮的设计尖速比的选择建议。     

基于高清工业相机的盾构隧道裂缝智能识别算法分析

裂缝一直是隧道病害的重点检测对象,但传统人工巡检仅能通过肉眼发现后记录,人工识别精准度与效率完全取决于个人经验判断,无信息化手段辅助,作业效率识别精度亟待提升。针对以上问题,本文借助高清工业相机成像分辨率高、采集速度快等特点,将高清工业相机部署于轨道车上获取隧道表面裂缝病害信息,大幅提高了隧道裂缝识别效率,将识别精度提升至0.2 mm,同时融入优化的Cascade R-CNN算法,在有监督情况下训练隧道裂缝样本,最终实现了隧道裂缝病害的高效提取,同时研发了一套包含硬件数据采集、数据处理软件、数据管理平台的裂缝病害识别路线,真正意义上破除了识别慢、精度低、靠经验、难管理的技术壁垒。     

An approach to determining the thicknesses of shear bands with an echelon‐crack structure

In this paper, the internal structure of shear band is investigated, and a model of the shear band with an echelon crack structure is developed. The model assumes the shear band to be composed of two conjugate sets of echelon cracks, such that the smaller echelon cracks are embedded in the space of the larger ones. The additional strain induced by the echelon cracks and the anisotropic development of the compliance tensor in the shear band zone are analyzed. The critical crack density at the onset of shear band is obtained by applying the bifurcation condition. Deviating from previous approaches, the new procedure evaluates the thickness of shear band based on the geometrical characteristics of echelon crack arrays and the failure probability of grain boundaries in the longitudinal direction at the onset of shear band. Parametric analysis shows that grain size, internal friction angle, dilation angle, and failure probability of grain boundaries are the dominant factors that account for the shear band thickness. The calculated results are consistent with the experimental data available in the literature. The model soundly explains that the measurements of the shear band thickness are generally scattered, ranging from 4 to 30 (or even more) times the grain size. Copyright © 2011 John Wiley & Sons, Ltd.