A two‐dimensional coupled hydromechanical discontinuum model for simulating rock hydraulic fracturing

Within the framework of our discontinuous deformation analysis for rock failure algorithm, this paper presents a two‐dimensional coupled hydromechanical discontinuum model for simulating the rock hydraulic fracturing process. In the proposed approach, based on the generated joint network, the calculation of fluid mechanics is performed first to obtain the seepage pressure near the tips of existing cracks, and then the fluid pressure is treated as linearly distributed loads on corresponding block boundaries. The contribution of the hydraulic pressure to the initiation/propagation of the cracks is considered by adding the components of these blocks into the force matrix of the global equilibrium equation. Finally, failure criteria are applied at the crack tips to determine the occurrence of cracking events. Several verification examples are simulated, and the results show that this newly proposed numerical model can simulate the hydraulic fracturing process correctly and effectively. Although the numerical and experimental verifications focus on one unique preexisting crack, because of the capability of discontinuous deformation analysis in simulating block‐like structures, the proposed approach is capable of modeling rock hydraulic fracturing processes. Copyright © 2014 John Wiley & Sons, Ltd.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.     

雅安芦山4.20震后县级单元生态系统风险评价

区域生态风险评价是对各种生态风险及环境问题进行评价和管理的重要手段。针对雅安地震灾区特殊的自然地理及生态环境特征,选取芦山县为研究对象,采用遥感、GIS及SPSS统计分析的方法,通过风险源、风险受体、暴露和易损性分析,建立生态风险综合评价模型,划分生态风险区类型,进而提出生态风险管理对策。结果表明:1)微度和低度生态风险区集中分布在高海拔的森林及草地生态系统,该区生物多样性丰富,抗干扰能力较强,地质灾害及人类活动影响较小;2)中度和高度生态风险区具有沿农田及建设用地生态系统集聚分布的特征,该区地质灾害频繁,地壳活动性较强,生态系统抵抗灾害的能力较差。研究结果可为地震灾区防御、规避风险及安全选址提供科学依据。     

PPP/SINS紧耦合系统仿真的研究与分析

在捷联惯导(SINS)和GPS卫星接收机进行紧耦合的研究中,采用差分定位进行紧耦合的方法比较成熟,而关于精密单点定位(PPP)与捷联惯导紧耦合的研究还比较少。本文对精密单点定位与捷联惯导紧组合系统进行了Matlab仿真,利用数学解析的方法产生机载运动轨迹,通过设置系统的参数,获得仿真SINS和GPS数据;然后,通过PPP/SINS紧组合系统的仿真程序解算,将定位结果与PPP的结果比较,表明PPP/SINS紧组合导航定位的结果比PPP的精度和可靠性好,而且收敛的速度更快,同时也验证了算法的正确性。最后,分析了不同等级惯导对定位精度的影响。     

2000～2015年会理县地表覆盖变化监测

以LandSat多时相影像为数据源,采用基于规则的面向对象分类方法,监测会理县2000～ 2015年地表覆盖变化.结合1∶50 000 DEM数据,分析了会理县地表覆盖构成与转移、变化动态度及潜在退耕地情况.监测分析结论能为会理县加强空间管制、促进土地资源集约利用、指导生态文明建设等提供决策信息支撑.     

The evolution of the electronics industry in Johor (Malaysia): Strategic coupling,adaptiveness, adaptation,and the role of agency

Bringing together concepts from the global production networks and evolutionary economic geography literature, this article empirically examines the trajectory of the electrical and electronics industry in Johor (Malaysia). Based on trends in firm entries and exit as well as interviews with companies, we find limited robustness in the industry’s trajectory. While there is evidence of the role of ‘structure’ in this outcome, we argue that human agency – particularly the actions of subnational policy-makers – is key. This is manifest in a preference for fostering regional ‘adaptiveness’ through the often uncritical promotion of a diversity of economic sectors. This compromises the meaningful pursuit of regional ‘adaptation’ in the form of new and more complex branches emerging from existing industries. This arrested development, in turn, hinders an effective strategic coupling between the regional economy and multinational corporations, thus undermining regional resilience.     

重庆城口高燕锰矿床矿物解离度与工艺粒度研究

随着当前矿产资源日趋贫、细、杂,合理利用低品位和复杂多金属矿石是目前选矿工作的重要问题（吴荣庆, 2008）,只有通过对矿物原料或产物中元素或矿物的状态和性质的系统研究,阐明其行为规律,指导和配合矿物加工研究和生产,才能有针对性地选择选矿方法和工艺流程（贾木欣, 2007）,实现对矿物资源的综合利用（吕宪俊,2001）。而矿物工艺粒度、解离度对选矿发挥着不可缺少的重要作用。矿物解离是选矿的必要条件之一,矿物工艺粒度、磨矿粒度等因素对矿物解离度都有影响,这些因素致使解离度和工艺粒度之间关系复杂化（洪秉信,傅文章., 2012）。本文通过对重庆城口高燕锰矿床矿物解离度与工艺粒度的研究,从而探讨解离度与工艺粒度对选矿加工的影响。     

同化FY3B/IRAS资料对GRAPES分析场影响诊断

GRAPES(Globe and Regional Assimilation and Prediction System)变分系统能够同化常规资料和非常规卫星资料,这些被同化的资料究竟对同化系统得到的分析场有何影响,目前国内外尚未见相关的研究文献。为此,首次采用基于信息熵信号自由度思想,诊断风云三号B星(FY3B)红外分光计(Infrared Atmospheric Sounder,IRAS)资料对GRAPES分析场的影响。诊断过程中,采用数值逼近方法,统计2012年12月24日18时到2013年1月22日00时共114个时次IRAS资料对GRAPES分析场影响,结果表明,IRAS中高层通道亮温资料对GRAPES分析场影响比地表通道20观测亮温的影响大,地表通道8和9观测亮温对分析场影响较大。前24个GRAPES变分同化时次每个时次IRAS通道亮温对分析场影响的贡献率分析结果显示,高层通道和H_2O通道贡献率较大。个例分析结果表明,在同化探空资料基础上加入IRAS资料后,温度和湿度增量场变化幅度较大,表明IRAS资料对分析场有降温和增湿作用。     

Approach to calculating spatial similarity degrees of the same river basin networks on multi-scale maps

Obtaining spatial similarity degrees among the same objects on multi-scale maps is of importance in map generalization. This paper firstly defines the concepts of ‘map scale change’ and ‘spatial similarity degree’; then it proposes a model for calculating the spatial similarity degree between a river basin network at one scale and its generalized version at another scale. After this, it validates the new model and gets 16 points in the model validation process. The x-coordinate and y-coordinate of each point are map scale change and spatial similarity degree, respectively. Last, a formula for calculating spatial similarity degree taking map scale change as the only variable is obtained by the curve fitting method. The formula along with the model can be used to automate the algorithms for simplifying river basin networks.