Interlaboratory comparison of cosmogenic 21Ne in quartz

We performed an interlaboratory comparison study with the aim to determine the accuracy of cosmogenic ²¹Ne measurements in quartz. CREU-1 is a natural quartz standard prepared from amalgamated vein clasts which were crushed, thoroughly mixed, and sieved into 125–250 μm and 250–500 μm size fractions. 50 aliquots of CREU-1 were analyzed by five laboratories employing six different noble gas mass spectrometers. The released gas contained a mixture of 16–30% atmospheric and 70–84% non-atmospheric (predominantly cosmogenic) ²¹Ne, defining a linear array on the ²²Ne/²⁰Ne-²¹Ne/²⁰Ne three isotope diagram with a slope of 1.108 ± 0.014. The internal reproducibility of the measurements is in good agreement with the formal analytical precision for all participating labs. The external reproducibility of the ²¹Ne concentrations between labs, however, is significantly overdispersed with respect to the reported analytical precision. We report an average reference concentration for CREU-1 of 348 ± 10 × 10⁶ at [²¹Ne]/g[SiO₂], and suggest that the 7.1% (2σ) overdispersion of our measurements may be representative of the current accuracy of cosmogenic ²¹Ne in quartz. CREU-1 was tied to CRONUS-A, which is a second reference material prepared from a sample of Antarctic sandstone. We propose a reference value of 320 ± 11 × 10⁶ at/g for CRONUS-A. The CREU-1 and CRONUS-A intercalibration materials may be used to improve the consistency of cosmogenic ²¹Ne to the level of the analytical precision.     

Dating Pleistocene deltaic deposits using in-situ 26Al and 10Be cosmogenic nuclides

The present study aims at testing the possibility of using the in-situ cosmogenic burial dating technique on deltaic deposits. The sequence analyzed is exposed along the Ligurian coast (north-west Italy) and is made of proximal marine and continental deposits previously considered Pliocene or Plio-Quaternary in age. In the study area two allostratigraphic units were recognized. The lower unit represents the evolution of a small coarse-grained delta developed in a fjord or embayment environment. The coarsening/shallowing upward trend observed within the sections, from bottom to top, suggests that the delta prograded rapidly in the landward portion of the canyon placed opposite to the paleo-river outlet. Within the deltaic sequence the transgressive and highstand system tracts were recognized. The unit 2 is composed by several alluvial fan systems deposited in small incised valleys developed within the previously, uplifted deltaic deposits and successively incised by a braided river system. In-situ produced cosmogenic nuclides were used in order to date the age of the deposition of the deltaic deposits. Results suggest that the studied deltaic sediments belonging to the unit 1 were deposited between 1,300,000 and 200,000 year ago thus during the Lower to Middle Pleistocene, whereas the unit 2 was deposited during the Middle Pleistocene as a consequence of a tectonically driven uplift phase. Furthermore samples collected within the prograding part of the delta show the higher denudation rates. The obtained results demonstrate that burial ages and related erosion rates inferred from cosmogenic nuclides concentrations can be considered as a very useful tool to reconstruct the sea level changes over the past 1 million year.     

Monthly record of the Cl and 36Cl fallout rates in a deciduous forest ecosystem in NE France in 2012 and 2013

This study aims at determining the chlorine and chlorine-36 fallout rates in an experimental beech forest site located in NE France (48°31′55″ N, 5°16′8″ E). A monthly record of Cl and ³⁶Cl concentrations in rainfall samples collected above the canopy was performed during two years, from March 2012 to February 2014. The results show that the Cl concentrations mainly originate from sea-spray while the ³⁶Cl concentrations originate from the stratosphere and therefore present a seasonal dependency. Abrupt and important inputs of ³⁶Cl from the stratosphere indeed yield sharp increases of the recorded concentrations during the spring-summer. We also show that a too short sampling period might bias the determined ³⁶Cl fallout rate. To smooth the seasonal and sporadic bursts of ³⁶Cl, a minimum of 6 months sampling period is required. A mean ³⁶Cl fallout rate of (77 ± 21) atoms m⁻² s⁻¹ can be deduced from our study, which is 45% higher than the modelled value. This discrepancy suggests more studies aiming at measuring the ³⁶Cl fallout rate worldwide are necessary.     

The potential of historic rock avalanches and man-made structures as chlorine-36 production rate calibration sites

Samples from three medieval rock avalanches from the French (Le Claps, Mont Granier) and Austrian Alps (Dobratsch) and a man-made structure, i.e. the Stephansdom in Vienna, have been analysed for in-situ produced ³⁶Cl by accelerator mass spectrometry (AMS). All four sampling sites of independently known exposure duration turned out to be not appropriate as calibration sites for the determination of the ³⁶Cl-production rate from Ca. Indeed, the determination of short exposure ages for dating rock avalanches and man-made structures by ³⁶Cl is hindered dramatically by inheritance, especially for samples characterized by high ^natCl-concentrations. Generally, there are hints that the theoretical calculation of ³⁶Cl-production from epithermal and thermal neutron-capture on ³⁵Cl is highly underestimated in all existing models, thus, asking for particular precaution if working on high-Cl samples for any project. Hence, this work evidences that potential high inheritance, even for samples reasonably shielded before exhumation, has to be considered especially when dealing with recently exposed surfaces such as glacially polished rocks, alluvial terraces, fault scarps etc.     

原地生成宇宙成因核素在地学研究中的应用

传统测年方法(14C、热释光、光释光等)无法直接测量地貌面或基岩面的形成年代,利用宇宙生成核素定出的年代可以直接计算地质、地貌体的暴露年代和埋藏时代。随着测量仪器的长足进步,特别是加速器质谱(AMS)检出限(可测至106原子)的大幅度提高,原地生成宇宙成因核素定年技术给地貌学带来了革命性的变化,因此宇宙生成核素被广泛应用于古气候学、构造地质学、火山年代学及古地磁学等。本文阐释了原地生成宇宙核素定年方法的基本原理,并在地学领域应用的现有基础上,从冰川、断层、阶地等研究对象出发,以沉积物埋藏年龄、地表侵蚀速率、断层滑动速率等为研究内容,具体描述该定年技术在冰川地貌、构造地貌、地貌过程及地貌演化研究中的国内外研究现状,以及应用中尚待解决的诸如核素产生速率与空间、时间关系;样品地质、地貌条件对结果造成的不确定性等问题。     

Lake George revisited: New evidence for the origin and evolution of a large closed lake,Southern Tablelands,NSW, Australia

Lake George contains the longest continuous sedimentary record of any Australian lake basin, but previous age models are equivocal, particularly for the oldest (pre-Quaternary) part of the record. We have applied a combination of cosmogenic nuclide burial dating, magnetostratigraphy and biostratigraphy to determine the age of the basal (fluvial) unit in the basin, the Gearys Gap Formation. Within the differing resolutions achievable by the three dating techniques, our results show that (i) the Gearys Gap Formation, began accumulating at ca 4 Ma, in the early Pliocene (Zanclean), and (ii) deposition had ceased by ca 3 Ma, in the mid late Pliocene (Piacenzian). Whether the same age control provides an early Pliocene (Zanclean) age for the formation of the lake basin is uncertain. During the Piacenzian, the vegetation at the core site was a wetland community dominated by members of the coral fern family Gleicheniaceae, while the surrounding dryland vegetation was a mix of sclerophyll and temperate rainforest communities, with the latter including trees and shrubs now endemic to New Guinea–New Caledonia and Tasmania. Mean annual rainfall and temperatures are inferred to have been ～2000–3000 mm, although probably not uniformly distributed throughout the year, and within the mesotherm range (>14°C <20°C), respectively. Unresolved issues are: (1) Does the basal gravel unit predate uplift of the Lake George Range and therefore provide evidence that one of the proposed paleo-spillways of Lake George, that above Geary's Gap, has been elevated up to 100–200 m by neotectonic activity over the past 4 million years? (2) Did a shallow to deepwater lake exist elsewhere in the lake basin during the Pliocene?     

Variations in the geomagnetic dipole moment during the Holocene and the past 50 kyr

All absolute paleointensity data published in peer-reviewed journals were recently compiled in the GEOMAGIA50 database. Based on the information in GEOMAGIA50, we reconstruct variations in the geomagnetic dipole moment over the past 50  kyr, with a focus on the Holocene period. A running-window approach is used to determine the axial dipole moment that provides the optimal least-squares fit to the paleointensity data, whereas associated error estimates are constrained using a bootstrap procedure. We subsequently compare the reconstruction from this study with previous reconstructions of the geomagnetic dipole moment, including those based on cosmogenic radionuclides (¹⁰Be and ¹⁴C). This comparison generally lends support to the axial dipole moments obtained in this study. Our reconstruction shows that the evolution of the dipole moment was highly dynamic, and the recently observed rates of change (5% per century) do not appear unique. We observe no apparent link between the occurrence of archeomagnetic jerks and changes in the geomagnetic dipole moment, suggesting that archeomagnetic jerks most likely represent drastic changes in the orientation of the geomagnetic dipole axis or periods characterized by large secular variation of the non-dipole field. This study also shows that the Holocene geomagnetic dipole moment was high compared to that of the preceding  40  kyr, and that  4 · 10²²  Am² appears to represent a critical threshold below which geomagnetic excursions and reversals occur.     

Complex multiple cosmogenic nuclide concentration and histories in the arid Rio Lluta catchment,northern Chile

Terrestrial cosmogenic nuclide (TCN) concentrations measured in river sediments can be used to estimate catchment‐wide denudation rates. By investigating multiple TCN the steadiness of sediment generation, transport and depositional processes can be tested. Measurements of ¹⁰Be, ²¹Ne and ²⁶Al from the hyper‐ to semi‐arid Rio Lluta catchment, northern Chile, yield average single denudation rates ranging from 12 to 75 m Myr^–1 throughout the catchment. Paired nuclide analysis reveals complex exposure histories for most of the samples and thus the single nuclide estimates do not exclusively represent catchment‐wide denudation rates. The lower range of single nuclide denudation rates (12–17 m Myr^–1), established with the noble gas ²¹Ne, is in accordance with palaeodenudation rates derived from ²¹Ne/¹⁰Be and ²⁶Al/¹⁰Be ratio analysis. Since this denudation rate range is measured throughout the system, it is suggested that a headwater signal is transported downstream but modulated by a complex admixture of sediment that has been stored and buried at proximal hillslope or terrace deposits, which are released during high discharge events. That is best evidenced by the stable nuclide ²¹Ne, which preserves the nuclide concentration even during storage intervals. The catchment‐wide single ²¹Ne denudation rates and the palaeodenuation rates contrast with previous TCN‐derived erosion rates from bedrock exposures at hillslope interfluves by being at least one order of magnitude higher, especially in the lower river course. These results support earlier studies that identified a coupling of erosional processes in the Western Cordillera contrasting with decoupled processes in the Western Escarpment and in the Coastal Cordillera. Copyright © 2008 John Wiley & Sons, Ltd.     

Effects of terrain smoothing on topographic shielding correction factors for cosmogenic nuclide‐derived estimates of basin‐averaged denudation rates

Estimation of spatially averaged denudation rates from cosmogenic nuclide concentrations in sediments depends on the surface production rates, the scaling methods of cosmic ray intensities, and the correction algorithms for skyline, snow and vegetation shielding used to calculate terrestrial cosmogenic nuclide production. While the calculation of surface nuclide production and application of latitude, altitude and palaeointensity scaling algorithms are subjects of active research, the importance of additional correction for shielding by topographic obstructions, snow and vegetation is the subject of ongoing debate. The derivation of an additional correction factor for skyline shielding for large areas is still problematic. One important issue that has yet to be addressed is the effect of the accuracy and resolution of terrain representation by a digital elevation model (DEM) on topographic shielding correction factors. Topographic metrics scale with the resolution of the elevation data, and terrain smoothing has a potentially large effect on the correction of terrestrial cosmogenic nuclide production rates for skyline shielding. For rough, high‐relief landscapes, the effect of terrain smoothing can easily exceed analytical errors, and should be taken into account. Here we demonstrate the effect of terrain smoothing on topographic shielding correction factors for various topographic settings, and introduce an empirical model for the estimation of topographic shielding factors based on landscape metrics. Copyright © 2008 John Wiley and Sons, Ltd.