The Campanian-Maastrichtian magnetostratigraphy of the Volga region (vicinity of Volsk town)

Paleomagnetism and rock magnetism have been studied for the first time in Campanian-Maastrichtian carbonate deposits (Sengilei, Karsun, and Radishchev Formations) from the Bolshevik and Kommunar quarries near the town of Volsk (Saratov area, Volga region). Characteristic components of normal and reverse polarity were detected in samples demagnetized in the alternating field, and positive results of the reversal test were obtained. The virtual geomagnetic pole wander paths calculated for the Sengilei Formation and lower Karsun Formation rocks showed statistical similarity to those for stable Europe of the respective age. The magnetostratigraphic zones revealed in the Bolshevik and Kommunar sections were correlated to chrons 33r, 32n2, 32n1, and 31r of the geomagnetic polarity time scale. The magnetic zones of predominantly reverse and normal polarity detected, though discontinuously, in the low magnetic uppermost Karsun Formation and in the Radishchev Formation correspond to the top of chron 31r and joint chrons 31n and 30n, respectively. Rock magnetic data help identifying deposits rich in cosmogenic metal particles and provide stratigraphic constraints on the Radishchev Formation base.     

Late Devensian deglaciation of the Tyne Gap Palaeo‐Ice Stream,northern England

The deglacial history of the central sector of the last British–Irish Ice Sheet is poorly constrained, particularly along major ice‐stream flow paths. The Tyne Gap Palaeo‐Ice Stream (TGIS) was a major fast‐flow conduit of the British–Irish Ice Sheet during the last glaciation. We reconstruct the pattern and constrain the timing of retreat of this ice stream using cosmogenic radionuclide (¹⁰Be) dating of exposed bedrock surfaces, radiocarbon dating of lake cores and geomorphological mapping of deglacial features. Four of the five ¹⁰Be samples produced minimum ages between 17.8 and 16.5 ka. These were supplemented by a basal radiocarbon date of 15.7 ± 0.1 cal ka BP, in a core recovered from Talkin Tarn in the Brampton Kame Belt. Our new geochronology indicates progressive retreat of the TGIS from 18.7 to 17.1 ka, and becoming ice free before 16.4–15.7 ka. Initial retreat and decoupling of the TGIS from the North Sea Lobe is recorded by a prominent moraine 10–15 km inland of the present‐day coast. This constrains the damming of Glacial Lake Wear to a period before ∼18.7–17.1 ka in the area deglaciated by the contraction of the TGIS. We suggest that retreat of the TGIS was part of a regional collapse of ice‐dispersal centres between 18 and 16 ka.

     

Paleoseismology of the 2016 MW 6.1 Petermann earthquake source: Implications for intraplate earthquake behaviour and the geomorphic longevity of bedrock fault scarps in a low strain-rate cratonic region

The 20 May 2016 M_W 6.1 Petermann earthquake in central Australia generated a 21 km surface rupture with 0.1 to 1 m vertical displacements across a low-relief landscape. No paleo-scarps or potentially analogous topographic features are evident in pre-earthquake Worldview-1 and Worldview-2 satellite data. Two excavations across the surface rupture expose near-surface fault geometry and mixed aeolian-sheetwash sediment faulted only in the 2016 earthquake. A 10.6 ± 0.4 ka optically stimulated luminescence (OSL) age of sheetwash sediment provides a minimum estimate for the period of quiescence prior to 2016 rupture. Seven cosmogenic beryllium-10 (¹⁰Be) bedrock erosion rates are derived for samples < 5 km distance from the surface rupture on the hanging-wall and foot-wall, and three from samples 19 to 50 km from the surface rupture. No distinction is found between fault proximal rates (1.3 ± 0.1 to 2.6 ± 0.2 m Myr⁻¹) and distal samples (1.4 ± 0.1 to 2.3 ± 0.2 m Myr⁻¹). The thickness of rock fragments (2–5 cm) coseismically displaced in the Petermann earthquake perturbs the steady-state bedrock erosion rate by only 1 to 3%, less than the erosion rate uncertainty estimated for each sample (7–12%). Using ¹⁰Be erosion rates and scarp height measurements we estimate approximately 0.5 to 1 Myr of differential erosion is required to return to pre-earthquake topography. By inference any pre-2016 fault-related topography likely required a similar time for removal. We conclude that the Petermann earthquake was the first on this fault in the last ca. 0.5–1 Myr. Extrapolating single nuclide erosion rates across this timescale introduces large uncertainties, and we cannot resolve whether 2016 represents the first ever surface rupture on this fault, or a > 1 Myr interseismic period. Either option reinforces the importance of including distributed earthquake sources in fault displacement and seismic hazard analyses.     

The Cosmolian program for simulating aeolian dynamics and its application to central Australia

The wide spatial coverage of sand dunes in continental interiors makes the understanding of their activity and accumulation history valuable for palaeoenvironmental reconstructions and the interpretation of landscape evolution. Nevertheless, the study of aeolian landscape development at the million-year timescale is hampered by the complex interaction of factors determining dune migration and the inherently self-destructive nature of their chronostratigraphy, thus limiting the applicability of traditional dating methods. This study presents a standalone program that simulates aeolian transport based on luminescence-derived chronologies coupled with numerical modelling of the accumulation of cosmogenic nuclides. This integrative approach to modelling the history of aeolian landforms reveals phases of emergence of aeolian sand into the landscape, and provides a data-based scheme that facilitates the morphodynamical study of aeolian processes over multiple timescales and up to several millions of years. The application of the program for reanalysing previously reported data from the Australian Simpson Desert reveals multiple pulses of sand dispersion into central Australia at 3.8–3.4, 2.9–2.5 and 1.5–1 Ma, corresponding to pronounced changes in climatic conditions and landscape deformation events. The synchronicity of the results with the established environmental framework that would promote the production and aeolian distribution of sand exemplifies the applicability of process-based modelling in constructing a timeframe of key landscape evolution events in arid environments by studying aeolian deposits. The dependence of the parameters used to determine environmental settings on sand transportation patterns additionally makes the program a powerful tool to further investigate the triggers and mechanisms of aeolian processes.     

CRONUS-Earth calibration samples from the Huancané II moraines,Quelccaya Ice Cap,Peru

The Huancané II moraines deposited by the Quelccaya Ice Cap in southern Peru were selected by the CRONUS-Earth Project as a primary site for evaluating cosmogenic-nuclide scaling methods and for calibrating production rates. The CRONUS-Earth Project is an effort to improve the state of the art for applications of cosmogenic nuclides to earth-surface chronology and processes. The Huancané II moraines are situated in the southern Peruvian Andes at about 4850 m and ∼13.9°S, 70.9°W. They are favorable for cosmogenic-nuclide calibration because of their low-latitude and high-elevation setting, because their age is very well constrained to 12.3 ± 0.1 ka by 34 radiocarbon ages on peat bracketing the moraines, and because boulder coverage by snow or soil is thought to be very unlikely. However, boulder-surface erosion by granular disintegration is observed and a ∼4% correction was applied to measured concentrations to compensate. Samples from 10 boulders were analyzed for ¹⁰Be, ²⁶Al, and ³⁶Cl. Interlaboratory bias at the ∼5% level was the largest contributor to variability of the ¹⁰Be samples, which were prepared by three laboratories (the other two nuclides were only prepared by one laboratory). Other than this issue, variability for all three nuclides was very low, with standard deviations of the analyses only slightly larger than the analytical uncertainties. The site production rates (corrected for topographic shielding, erosion, and radionuclide decay) at the mean site elevation of 4857 m were 45.5 ± 1.6 atoms ¹⁰Be (g quartz)⁻¹ yr⁻¹, 303 ± 15 atoms ²⁶Al (g quartz)⁻¹ yr⁻¹, and 1690 ± 100 atoms ³⁶Cl (g K)⁻¹ yr⁻¹. The nuclide data from this site, along with data from other primary sites, were used to calibrate the production rates of these three nuclides using seven global scaling methods. The traditional Lal formulation and the new Lifton-Sato-Dunai calibrations yield average ages for the Huancané samples that are in excellent-to-good agreement with the radiocarbon age control (within 0.7% for ¹⁰Be and ³⁶Cl and 6% for ²⁶Al). However, all of the neutron-monitor-based methods yielded ages that were too young by about 20%. The nuclide production ratios at this site are 6.74 ± 0.34 for ²⁶Al/¹⁰Be in quartz and 37.8 ± 2.3 (atoms ³⁶Cl (g K)⁻¹) (atom ¹⁰Be (g SiO₂)⁻¹)⁻¹ for ³⁶Cl/¹⁰Be, in sanidine and quartz, respectively.     

Rates of fluvial bedrock incision within an actively uplifting orogen: Central Karakoram Mountains, northern Pakistan

Terrestrial cosmogenic nuclide (TCN) ¹⁰Be surface exposure ages for strath terraces along the Braldu River in the Central Karakoram Mountains range from 0.8 to 11 ka. This indicates that strath terrace formation began to occur rapidly upon deglaciation of the Braldu valley at  11 ka. Fluvial incision rates for the Braldu River based on the TCN ages for strath terraces range from 2 to 29 mm/a. The fluvial incision rates for the central gorged section of the Braldu River are an order of magnitude greater than those for the upper and lower reaches. This difference is reflected in the modern stream gradient and valley morphology. The higher incision rates in the gorged central reach of the Braldu River likely reflect differential uplift above the Main Karakoram Thrust that has resulted in the presence of a knickpoint and more rapid fluvial incision. The postglacial fluvial incision rate (2–3 mm/a) for the upper and lower reaches are of the same order of magnitude as the exhumation rates estimated from previously published thermochronological data for the Baltoro granite in the upper catchment region and for the adjacent Himalayan regions.     

Rapid incision of the Colorado River in Glen Canyon – insights from channel profiles,local incision rates,and modeling of lithologic controls

The Colorado River system in southern Utah and northern Arizona is continuing to adjust to the baselevel fall responsible for the carving of the Grand Canyon. Estimates of bedrock incision rates in this area vary widely, hinting at the transient state of the Colorado and its tributaries. In conjunction with these data, we use longitudinal profiles of the Colorado and tributaries between Marble Canyon and Cataract Canyon to investigate the incision history of the Colorado in this region. We find that almost all of the tributaries in this region steepen as they enter the Colorado River. The consistent presence of oversteepened reaches with similar elevation drops in the lower section of these channels, and their coincidence within a corridor of high local relief along the Colorado, suggest that the tributaries are steepening in response to an episode of increased incision rate on the mainstem. This analysis makes testable predictions about spatial variations in incision rates; these predictions are consistent with existing rate estimates and can be used to guide further studies. We also present cosmogenic nuclide data from the Henry Mountains of southern Utah. We measured in situ ¹⁰Be concentrations on four gravel‐covered strath surfaces elevated from 1 m to 110 m above Trachyte Creek. The surfaces yield exposure ages that range from approximately 2·5 ka to 267 ka and suggest incision rates that vary between 350 and 600 m/my. These incision rates are similar to other rates determined within the high‐relief corridor. Available data thus support the interpretation that tributaries of the Colorado River upstream of the Grand Canyon are responding to a recent pulse of rapid incision on the Colorado. Numerical modeling of detachment‐limited bedrock incision suggests that this incision pulse is likely related to the upstream‐dipping lithologic boundary at the northern edge of the Kaibab upwarp. Copyright © 2009 John Wiley & Sons, Ltd.     

Cosmogenic nuclide burial age of the Sanying Formation and its implications

The Pliocene fluvial/lacustrine sediments of the Sanying Formation lie along the Red River fault and its northwest extension;their majority outcrops appear around Eryuan.The Sanying Formation is characterized by multiple intercalated coal layers and its unconformities contact with the underlying Triassic limestone and the overlying Quaternary coarse sediments.Cosmogenic nuclide burial dating confirms the Pliocene age of the Sanying Formation.The burial ages of the overlying Quaternary sediments provide the lower age limit of the Sanying Formation:2 Ma.Detrital zircon U-Pb age distribution suggests provenance of the Sanying Formation traced to the Songpan-Ganzi flysch belt.From the spatial distribution as well as sedimentary and fault ages,we found a strong connection of the Sanying Formation with the Red River and the Jianchuan faults.We therefore propose that activation of the Red River and the Jianchuan faults during the Late Miocene resulted in subsidence of basins in the extensional areas around Eryuan and in the middle to south segments of the Red River fault.The basins were filled with water carried by the Jinsha River and overflow-lakes formed within the basins where the Sanying Formation was deposited.Most of the lakes were dried and sedimentation of the Sanying Formation ceased due to the uplift of the Yunling Mountains,which forced rerouting of the Jinsha River at the beginning of Quaternary.     

Cosmogenic 21Ne analysis of individual detrital grains: Opportunities and limitations

We use a numerical model describing cosmogenic nuclide acquisition in sediment moving through the upper Gaub River catchment to evaluate the extent to which aspects of source area geomorphology and geomorphological processes can be inferred from frequency distributions of cosmogenic ²¹Ne (²¹Ne_c) concentrations in individual detrital grains. The numerical model predicts the pathways of sediment grains from their source to the outlet of the catchment and calculates the total ²¹Ne_c concentration that each grain acquires along its pathway. The model fully accounts for variations in nuclide production due to changes in latitude, altitude and topographic shielding and allows for spatially variable erosion and sediment transport rates. Model results show that the form of the frequency distribution of ²¹Ne_c concentrations in exported sediment is sensitive to the range and spatial distribution of processes operating in the sediment's source areas and that this distribution can be used to infer the range and spatial distribution of erosion rates that characterise the catchment. The results also show that lithology can affect the form of the ²¹Ne_c concentration distribution indirectly by exerting control on the spatial pattern of denudation in a catchment. Model results further indicate that the form of the distribution of ²¹Ne_c concentrations in the exported sediment can also be affected by the acquisition of ²¹Ne_c after detachment from bedrock, in the diffusive (hillslope) and/or advective (fluvial) domains. However, for such post‐detachment nuclide acquisition to be important, this effect needs to at least equal the nuclide acquisition prior to detachment from bedrock. Copyright © 2009 John Wiley and Sons, Ltd.     

Cosmogenic nuclide‐derived rates of diffusive and episodic erosion in the glacially sculpted upper Rhone Valley,Swiss Alps

Denudation rates of small tributary valleys in the upper Rhone valley of the Swiss Central Alps vary by more than an order of magnitude within a very small distance (tens of kilometers). Morphometric data indicate two distinct erosion processes operate in these steep mountain valleys. We determined the rates of these processes using cosmogenic beryllium‐10 (¹⁰Be) in pooled soil and stream sediment samples. Denudation in deep, glacially scoured valleys is characterized by rapid, non‐uniform processes, such as debris flows and rock falls. In these steep valleys denudation rates are 760–2100 mm kyr^?1. In those basins which show minimal previous glacial modification denudation rates are low with 60–560 mm kyr^?1. The denudation rate in each basin represents a binary mixture between the rapid, non‐uniform processes, and soil creep. The soil production rate measured with cosmogenic ¹⁰Be in soil samples averages at 60 mm kyr^?1. Mixing calculations suggest that the debris flows and rock falls are occurring at rates up to 3000–7000 mm kyr^?1. These very high rates occur in the absence of baselevel lowering, since the tributaries drain into the Rhone trunk stream up‐stream of a knickzone. The flux‐weighted spatial average of denudation rates for the upper Rhone valley is 1400 mm kyr^?1, which is similar to rock uplift rates determined in this area from leveling. The pace and location of erosion processes are determined by the oscillation between a glacial and a non‐glacial state, preventing the landscape from reaching equilibrium. Copyright © 2010 John Wiley & Sons, Ltd.