Erosion rates of alpine bedrock summit surfaces deduced from in situ Be and Al

We have measured the concentration of in situ produced cosmogenic ¹⁰Be and ²⁶Al from bare bedrock surfaces on summit flats in four western U.S. mountain ranges. The maximum mean bare-bedrock erosion rate from these alpine environments is 7.6 ± 3.9 m My⁻¹. Individual measurements vary between 2 and 19 m My⁻¹. These erosion rates are similar to previous cosmogenic radionuclide (CRN) erosion rates measured in other environments, except for those from extremely arid regions. This indicates that bare bedrock is not weathered into transportable material more rapidly in alpine environments than in other environments, even though frost weathering should be intense in these areas. Our CRN-deduced point measurements of bedrock erosion are slower than typical basin-averaged denudation rates ( 50 m My⁻¹). If our measured CRN erosion rates are accurate indicators of the rate at which summit flats are lowered by erosion, then relief in the mountain ranges examined here is probably increasing.

We develop a model of outcrop erosion to investigate the magnitude of errors associated with applying the steady-state erosion model to episodically eroding outcrops. Our simulations show that interpreting measurements with the steady-state erosion model can yield erosion rates which are either greater or less than the actual long-term mean erosion rate. While errors resulting from episodic erosion are potentially greater than both measurement and production rate errors for single samples, the mean value of many steady-state erosion rate measurements provides a much better estimate of the long-term erosion rate.     

Deglaciation history at the Alpine-Mediterranean transition (Argentera-Mercantour,SW Alps) from 10Be dating of moraines and glacially polished bedrock

Estimating the extent and age of the last glacial maxima as well as the chronology of glacial recessions in various environmental contexts is key to source-to-sink studies and paleoclimate reconstructions. The Argentera-Mercantour massif is located at the transition between the Alps and the Mediterranean Sea, therefore, its deglaciation chronology can be compared to the sediment budget of the Var River basin. Based on 13 new cosmic-ray exposure (CRE) beryllium-10 (¹⁰Be) datings performed on moraines and polished crystalline bedrocks and 22 reassessed ¹⁰Be CRE ages from similar altitude nearby steep basement surfaces, and from a lake sediment core, we can constrain the deglaciation chronology of the Argentera-Mercantour massif. These data allow for the first time to fully reconstruct the deglaciation history at the scale of the entire massif in agreement with a major glacier recession at c. 15 ka, at the onset of Bølling transition between the Oldest and Older Dryas. Main deglaciation of the upper slopes [2700–2800 m above sea level (a.s.l.)] occurred after the Last Glacial Maximum (LGM) at 20.8–18.6 ka, followed by the main deglaciation of the lower slopes (2300 m a.s.l.) at 15.3–14.2 ka. Finally, the flat polished surfaces above 2600 m a.s.l. and the zones confined within narrow lateral valleys were likely affected by progressive ice melting of remaining debris covered glaciers and moraine erosion following the Younger Dryas re-advance stage between 12 and 8–9 ka. At lower elevations, the Vens Lake located at 2300 m a.s.l., allows evidence of the onset of lake sedimentation at c. 14 ka and a transition towards a vegetated environment that mainly occurred before 8 ka. Moraine final stabilization at 5 ka might reflect denudation acceleration during the Holocene humid phase. This contribution reveals a glacier–climate relationship more sensitive to warming phases in the southern Alps highlighted by a major decrease of glaciers after c. 15 ka. This major deglaciation is correlated with a 2.5-fold decrease of sediment discharge of rivers into the Mediterranean Sea. © 2019 John Wiley & Sons, Ltd.     

Exposure ages from relict lateral moraines overridden by the Fennoscandian ice sheet

Lateral moraines constructed along west to east sloping outlet glaciers from mountain centred, pre-last glacial maximum (LGM) ice fields of limited extent remain largely preserved in the northern Swedish landscape despite overriding by continental ice sheets, most recently during the last glacial. From field evidence, including geomorphological relationships and a detailed weathering profile including a buried soil, we have identified seven such lateral moraines that were overridden by the expansion and growth of the Fennoscandian ice sheet. Cosmogenic ¹⁰Be and ²⁶Al exposure ages of 19 boulders from the crests of these moraines, combined with the field evidence, are correlated to episodes of moraine stabilisation, Pleistocene surface weathering, and glacial overriding. The last deglaciation event dominates the exposure ages, with ¹⁰Be and ²⁶Al data derived from 15 moraine boulders indicating regional deglaciation 9600 ± 200 yr ago. This is the most robust numerical age for the final deglaciation of the Fennoscandian ice sheet. The older apparent exposure ages of the remaining boulders (14,600-26,400 yr) can be explained by cosmogenic nuclide inheritance from previous exposure of the moraine crests during the last glacial cycle. Their potential exposure history, based on local glacial chronologies, indicates that the current moraine morphologies formed at the latest during marine oxygen isotope stage 5. Although numerous deglaciation ages were obtained, this study demonstrates that numerical ages need to be treated with caution and assessed in light of the geomorphological evidence indicating moraines are not necessarily formed by the event that dominates the cosmogenic nuclide data.     

Short‐term erosion rates from a 7Be inventory balance

Detailed soil erosion studies bene?t from the ability to quantify the magnitude of erosion over time scales appropriate to the process. An inventory balance for ⁷Be was used to calculate sediment erosion in a 30·73 m² plot during a series of runoff‐producing thunderstorms occurring over three days at the Deep Loess Research Station in Treynor, Iowa, USA. The inventory balance included determination of the pre‐ and post‐storm ⁷Be inventories in the soil, the atmospheric in?ux of ⁷Be during the event, and pro?les of the ⁷Be activity in the soil following the atmospheric deposition. The erosion calculated in the plot using the ⁷Be inventory balance was 0·058 g cm^?2, which is 23 per cent of the annual average erosion determined using ¹³⁷Cs inventories. The calculated erosion from the mass balance is similar to the 0·059 g cm^?2 of erosion estimated from the amount of sediment collected at the outlet of the 6 ha ?eld during the study period and the delivery ratio (0·64). The inventory balance of ⁷Be provides a new means for evaluating soil erosion over the time period most relevant to quantifying the prediction of erosion from runoff. Copyright © 2003 John Wiley & Sons, Ltd.     

德州一次沙尘天气过程成因及气溶胶粒子的输送路径分析

利用NCEP 1°×1°再分析资料分析了2017年5月4日浮尘和5月5日扬沙天气的成因。结果表明：3日20时—4日08时,蒙古气旋在有利的环流背景下迅速发展,配合冷锋在内蒙古中部和东部形成大范围的强沙尘天气;4日20时—5日08时沙尘通过高空气流输送到华北地区,在自身沉降和较强下沉气流的共同作用下,迅速沉降形成华北地区大范围的浮尘天气;5日08—14时由于西北路冷空气影响,横槽转竖,冷锋加速南下,将大量沙源地的沙尘输送到德州造成扬沙天气。通过HYSPLIT模式对本次过程中气团后向轨迹的模拟,证实以上两个阶段沙尘天气过程中的输送方式及路径。通过分析影响系统、物理量和气象要素发现,蒙古国、我国内蒙古中部沙源地天气系统强度、位置的变化直接影响沙尘天气的类型,高层气流变化与沙尘天气的类型有很好的对应关系。     

基于MODIS的祁连山区积雪时空变化特征

利用2000-2003年日资料经8 d合成的500 m分辨率MODIS卫星反演积雪资料和数字高程模型, 借助于GIS空间分析技术, 以积雪频率和积雪盖度为监测指标, 研究分析了祁连山区整体的积雪空间分布状况及其年内变化特征, 地形对积雪的分布和季节变化的影响. 结果表明: 祁连山区的积雪分布极不均匀, 积雪主要沿山系走向成条带状分布, 呈现西段多, 东段次之, 中部和南部少, 山脊多, 山谷少的特征, 且海拔越高、 山势越陡、阴坡积雪的范围越大、持续时间越久. 累积降雪时间, 就全区而言为9月至翌年5月, 但不同高度、坡度和坡向带有所差别. 海拔4 000 m以上区域存在春、秋季两个时段的积雪补给, 而海拔4 000 m以下仅有中秋至中冬一个时段的积雪补给;坡度较平缓的区域冬季和春季为主要积雪补给期, 而坡度较陡的区域则为秋季和春季;平地和南坡积雪补给主要发生在冬季和春季, 而其它坡向为春季和秋季.     

Particle composition and size distributions in and around a deep-pit swine operation,Ames, IA

The contribution of emissions from agricultural facilities is rapidly becoming a major concern for local and regional air quality. Characterization of particle properties such as physical size distribution and chemical composition can be valuable in understanding the processes contributing to emissions and ultimate fate of particulate matter from agricultural facilities. A measurement campaign was conducted at an Iowa, deep-pit, three-barn swine finishing facility to characterize near-source ambient particulate matter. Size-specific mass concentrations were determined using minivol samplers, with additional size distribution information obtain using optical particle counters. Particulate composition was determined via ion chromatographic analysis of the collected filters. A thermal-CO₂ elemental/organic carbon analyzer measured particulate carbon. The chemical composition and size distribution of sub-micron particles were determined via real-time aerosol mass spectrometry. Primary particulate was not found to be a major emission from the examined facility, with filter-based impactor samples showing average near-source increases (~15–50 m) in ambient PM₁₀ of 5.8 ± 2.9 μg m⁻³ above background levels. PM_2.5 also showed contribution attributable to the facility (1.7 ± 1.1 μg m⁻³). Optical particle counter analysis of the numerical size distributions showed bimodal distributions for both the upwind and downwind conditions, with maximums around 2.5 μm and below the minimum quantified diameter of 0.3 μm. The distributions showed increased numbers of coarse particles (PM₁₀) during periods when wind transport came from the barns, but the differences were not statistically significant at the 95% confidence level. The PM₁₀ aerosols showed statistically increased concentrations of sulfate, nitrate, ammonium, calcium, organic carbon, and elemental carbon when the samplers were downwind from the pig barns. Organic carbon was the major constituent of the barn-impacted particulate matter in both sub-micron (54%) and coarse size (20%) ranges. The AMS PM₁ chemical speciation showed similar species increases, with the exception of and Ca⁺², the latter not quantified by the AMS.     

Very slow erosion rates and landscape preservation across the southwestern slope of the Ladakh Range,India

Erosion rates are key to quantifying the timescales over which different topographic and geomorphic domains develop in mountain landscapes. Geomorphic and terrestrial cosmogenic nuclide (TCN) methods were used to determine erosion rates of the arid, tectonically quiescent Ladakh Range, northern India. Five different geomorphic domains are identified and erosion rates are determined for three of the domains using TCN ¹⁰Be concentrations. Along the range divide between 5600 and 5700 m above sea level (asl), bedrock tors in the periglacial domain are eroding at 5.0 ± 0.5 to 13.1 ± 1.2 meters per million years (m/m.y.)., principally by frost shattering. At lower elevation in the unglaciated domain, erosion rates for tributary catchments vary between 0.8 ± 0.1 and 2.0 ± 0.3 m/m.y. Bedrock along interfluvial ridge crests between 3900 and 5100 m asl that separate these tributary catchments yield erosion rates <0.7 ± 0.1 m/m.y. and the dominant form of bedrock erosion is chemical weathering and grusification. Erosion rates are fastest where glaciers conditioned hillslopes above 5100 m asl by over‐steepening slopes and glacial debris is being evacuated by the fluvial network. For range divide tors, the long‐term duration of the erosion rate is considered to be 40–120 ky. By evaluating measured ¹⁰Be concentrations in tors along a model ¹⁰Be production curve, an average of ~24 cm is lost instantaneously every ~40 ky. Small (<4 km²) unglaciated tributary catchments and their interfluve bedrock have received very little precipitation since ~300 ka and the long‐term duration of their erosion rates is 300–750 ky and >850 ky, respectively. These results highlight the persistence of very slow erosion in different geomorphic domains across the southwestern slope of the Ladakh Range, which on the scale of the orogen records spatial changes in the locus of deformation and the development of an orogenic rain shadow north of the Greater Himalaya. Copyright © 2014 John Wiley & Sons, Ltd.