刃具斜切入破岩的试验与研究

介绍了刃具斜切入破岩的试验装置及试验结果，推导出了跃进载荷的计算公式，并对试验结果进行了理论分析，探讨了影响刃具侵入岩石难易的因素和影响破岩比功大小的因素。     

民和盆地上侏罗统湿型冲积扇沉积

本文通过岩相特征、粘土矿物分布、早期成岩矿物组合、微量元素等特征的综合分析，认为民和盆地上侏罗统下部为一较典型的湿型冲积扇沉积。冲积扇扇中发育河道冲刷充填和漫流沉积，而泥石流不发育。沉积层序与现代湿型冲积扇可对比。扇体中粘土岩及早期成岩矿物组合中富含高岭石，应与扇体发育时的潮湿气候和弱酸性流体的较强的淋滤有关。由粘土岩中微量元素因子分析进一步表明，该地层中富硼、钒的特征与相邻非扇相地层明显不同     

考虑入渗和蒸发影响的土坡稳定性分析方法

本研究建议的一种分析方法假定斜坡非饱和土体的水分运动参数及剪强度参数与饱和度的依赖关系均可根据实验或经验确定。通过数值计算方法妥任意给定的入渗和蒸发边界条件下斜坡土体的瞬态含水率分布及与其相对应的瞬态抗剪强度参数分布。在此基础上瞬态斜坡安全因数即可通过常规的稳定性分析方法求得。     

钻孔灌注桩孔径扩大与塌孔的预防措施

为保证桩基础工质量，节省灌注砼费用，采取了一系列相应措施预防孔径扩大和塌孔。着重介绍了有关预防措施和技术经济效果。     

二维地电条件下充电法地形改正的一种方法

本文首先讨论了充电法地形改正方法及存在的问题，提出了一种基于比值法思想的地改方法，经理论模型验算表明，有较好的地改效果     

试论矿产勘查中人的决定性因素

矿产勘查是一项系统工程，由多种因素构成，要想获得尽可能高的矿产勘查成果，仅依靠先进的成矿理论和找矿方法是不够的，还需注重掌握先进成矿理论与方法的管理人员的作用，在地勘行业调整与改革的现阶段，强调矿产勘查系统中人的决写性因素，认识人在矿产勘查中的地位与作用，提高勘查人员的素质，对调整，稳定发展地勘队伍具有一定的现实意义。     

湖南大坳地区云英岩蚀变体型钨锡矿床地质特征及控矿因素

大坳云英岩蚀变体型钨锡矿产于九嶷山复式花岗杂岩体中。钨锡矿体赋存在呈半隐伏产出的蚀变体中，且自下而上重叠分布，具“楼层式”结构的特点；矿体形态、有用组分的分布具有明显的分带性，产状、形态的变化与蚀变体具有一致性。研究认为花岗岩浆的侵位、区域性断裂的多次脉动作用及蚀变作用是区内钨锡矿形成的重要控制因素。     

山区三维地震勘探大时差静校正及时深转换

山地煤矿采区地形条件复杂，正确进行大时差静校正是处理好二维地震勘探资料的重要一环。大时差静校正会改变煤层反射波时间(t0)及双曲线特征，为减小校正误差，需设立一个CMP面，将校正量分为高频分量和CMP校正量。在地形高差变化剧烈的山地，不能用高于地表面的统一基准面为零线进行时深转换，须进行充填层时差(△t)校正，将统一基准面校正到地表面，再以地表面为零线进行时深转换成图。以便准确无误的展示煤层赋存形态，提高构造图精度。     

Bedload transport resistance in rough open‐channel flows

During bedload movement by saltation, streamwise momentum is transferred from the ?ow to the saltating grains. When the grains collide with other grains on the bed or in the ?ow, streamwise momentum is reduced, and there is a decrease in streamwise ?ow velocity and an increase in ?ow resistance, herein termed bedload transport resistance f_bt. Based on experiments in two ?umes with ?xed and mobile plane beds and previously published data, an equation is developed that may be used to predict f_bt for both capacity and non‐capacity ?ows. The variables in this equation are identi?ed by dimensional analysis and the coef?cients are determined by non‐linear regression. This equation applies to rough turbulent open‐channel ?ows, where the relative submergence is between 1 and 20 and the entire sediment load moves by saltation. An investigation of the relative magnitudes of f_bt and grain resistance f_c suggests that where dimensionless shear stress θ is less than 1 and saltation is the dominant mode of bedload transport, f_bt/f_c increases with θ but never exceeds 1. Copyright © 2004 John Wiley & Sons, Ltd.     

Analysis of crack movements observed in an alpine bedrock cliff

Crack widths and rock temperatures were monitored on an andestic bedrock cliff in the summit area of the Daisetsu Mountains, Hokkaido, northern Japan. Sequential data recorded the gradual widening of a crack to the point of critical crack extension, which resulted in catastrophic rock breakage. The data indicate that a combination of liquid water in?ltration into crack tip and subsequent freezing is the most signi?cant factor contributing to critical crack extension. The recorded sub‐critical crack movements involved a number of minor crack extensions and contractions, the timing of which correlates well with the magnitude of the reconstructed thermal stresses at the crack tip derived from thermal deformation of the plate‐shaped rock fragment. Larger crack extensions occurred when stress at the crack tip exceeded a threshold value, possibly re?ecting the control of rock fracture mechanics by which cracks are thought to propagate when the stress intensity factor at the crack tip exceeds the threshold values for stress corrosion cracking and the fracture toughness of the material. Copyright © 2004 John Wiley & Sons, Ltd.