PLS法与隧道围岩稳定性分类

围岩稳定性是隧道工程支护设计的基本参数,采用偏最小二乘回归法,综合考虑多因变量影响因素,对隧道围岩稳定性分类进行回归建模,并取得较好效果.     

浅水方程数值计算方法的研究

求解以水位为变量的连续方程,并根据Navier-Stokes方程压力修正算法的基本思想,建立了浅水方程的水位修正算法,放宽了对离散时间步长的限制.通过对离散方程系数矩阵的重新构造,建立了高分辨率有限元格式,该格式既具有较高的离散精度又避免了数值解的伪振荡.对动量方程的阻力项做负坡线性化处理,提高了露滩计算的稳定性.数值模拟结果与解析解吻合良好,表明所建立的数值计算方法是正确的和可靠的.     

太平庄井地下流体动态主要干扰因素研究

通过分析多年的观测资料，认为太平庄井地下流体动态的主要干扰因素为区域地下热水开采，其次为降雨。气压的明显变化对水位、水温也有一定干扰。区域开采造成太平庄井水位、水温同步下降，氢气测值升高；降雨导致太平庄井水位上升、水温下降。     

Estimating the orientation error of the Dahan Downhole Accelerometer using the maximum cross-correlation coefficient between the observed and synthetic waves

A new algorithm to correct the orientation error of the accelerometerat the Dahan Downhole Array, Hualien, Taiwan is developed. This algorithmconsists of three stages: (1) rotating two horizontal ground motions on thefree surface to the SH-SVdirection and SH axis offers a reference direction.(2) computing the synthetic downhole SH waves at a downhole station and (3)searching a rotation angle for downhole observation that yields a best waveformmatch between the synthetic and observed downhole seismograms. At this point, the rotated angle corresponding to the best waveform match can be considered as the orientation error. We selected five earthquakes with good data qualityfor analysis. Results show that this algorithm gives a more stable estimationthan a conventional method because it allows the selection of data from a wider time window for analyses. The estimated orientation error of the accelerometers at the Dahan Downhole Array after the 1999 reinstallation are40°, 114° and 285° at depths of 50, 100 and 200 m, respectively.     

The inversion of anelastic coefficient,source parameters and site respond using genetic algorithm

It gradually becomes a common work using large seismic wave data to obtain source parameters, such as seismic moment, break radius, stress drop, with completingof digital seismic network in China (Hough, et al, 1999; Bindi, et al, 2001). These parameters are useful on earthquake prediction and seismic hazard analysis.Although the computation methods of source parameters are simple in principle and the many research works have been done, it is not easy to obtain the parameters accurately. There are two factors affecting the stability of computation results. The first one is the effect of spread path and site respond on signal. According to the research results, there are different geometrical spreading coefficients on different epicenter distance. The better method is to introduce trilinear geometrical spreading model (Atkinson, Mereu, 1992; Atkinson, Boore, 1995; WONG, et al, 2002). In addition, traditional site respond is estimated by comparing with rock station, such as linear inversion method (Andrews, 1982), but the comparative estimation will introduce some errors when selecting different stations. Some recent research results show that site respond is not flat for rock station (Moya, et al, 2000; ZHANG,. et al, 2001; JIN, et al, 2000; Dutta, et al, 2001). The second factor is to obtain low-frequency level and corner frequency fromdisplacement spectrum. Because the source spectrum model is nonlinear function,these values are obtained by eye. The subjectivity is strong. The small change of corner frequency will affect significantly the result of stress drop.     

Calibration of an oscillating nozzle‐type rainfall simulator

Nozzle‐type rainfall simulators are commonly used in hydrologic and soil erosion research. Simulated rainfall intensity, originating from the nozzle, increases as the distance between the point of measurement and the source is decreased. Hence, rainfall measured using rain gauges would systematically overestimate the rainfall received at the ground level. A simple model was developed to adjust rainfall measured anywhere under the simulator to plot‐wide average rainfall at the ground level. Nozzle height, plot width, gauge diameter and height, and gauge location are required to compute this adjustment factor. Results from 15 runs at different rain intensities and durations, and with different rain gauge layouts, showed that a simple average of measured rain would overestimate the plot‐wide rain by about 20 per cent. Using the adjustment factor to convert measured rainfall for individual gauges before averaging improved the estimate of plot‐wide rainfall considerably. For the 15 runs considered, overall discrepancy between actual and measured rain is reduced to less than 1 per cent with a standard error of 0·97 mm. This model can be easily tested in the ?eld by comparing rainfall depths of different sized gauges. With the adjustment factor they should all give very similar values. Copyright © 2003 John Wiley & Sons, Ltd.     

关联度分析法在确定土地定级因素权重中的应用

从关联度分析法的基本原理入手，介绍了应用关联度分析法确定土地定级因素权重的具体方法，探讨了关联度分析法运用于土地定级因素权重确定的可行性。     

机载激光测深中的波浪改正技术

基于我国新研制的机载激光测深系统基本配置，提出了3种可供选择的波浪改正计算方案(也称为深度值归算方案)，具体分析了3种方案的适用条件和应用范围，并从理论上对3种改正模型的计算精度进行了估算。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

西南三江地区矿产资源遥感综合预测方法

详细阐述了矿产资源遥感综合预测方法的工作程序、控矿要素的数字化分析与遥感找矿模型的建立,以及遥感矿产的综合分析评价方法与应用等,并以西南三江中段遥感综合预测成果佐证了矿产资源遥感综合预测方法在矿产资源预测中能使野外调查工作更具预见性和目的性,从而大大缩短了矿产资源调查的工作周期。