Kinetic-simulating experiment combined with GC-IRMS analysis: application to identification and assessment of coal-derived methane from Zhongba Gas Field (Sichuan Basin, China)

The main purpose of this study is to model the δ¹³C values of methane derived from coal by combining kinetic-simulating experiment with the gas chromatography-isotope ratio mass spectrum (GC-IRMS) analysis. The stable carbon isotopic variation of methane in pyrolysates with heating temperature indicates that the assumptions for both a constant kinetic isotope effect (α) and a uniform initial isotopic composition (δ¹³C_o) are impractical for explaining the carbon isotopic fractionation during coalification. For purposes of simplification, two approaches are used in this paper to deal with the heterogeneity of terrestrial organic matter. One is that, assuming a uniform initial isotopic composition (i.e., δ¹³C_{i, o}=δ¹³C_o) for all methane-generating precursors in coal, the isotopic variation of methane is fitted by adjusting ΔE_{a, i} (E_{a¹³C, i}−E_{a¹²C, i}) for each hypothetical reaction. The other is that, assuming a constant kinetic isotope effect during the whole gas formation, that is all ΔE_{a, i} values are identical, the modeling of methane isotopic composition is achieved by changing the ¹³CH₄ generation potential of each reaction (f_{i, ¹³C}), namely, by adjusting the initial δ¹³C value (δ¹³C_{i, o}) for each methane-generating precursor. Results of the kinetic calculation shows that the two simulating methods can yield a similar result at a geological heating rate of 2 °C/My, which further demonstrates that those natural gases with methane δ¹³C value being approximately −36‰ are possibly sourced from the upper Triassic coal measure strata in the Northwestern Sichuan Basin.     

Petrology and Geochemistry of Early Cretaceous Bimodal Continental Flood Volcanism of the NW Etendeka, Namibia. Part 1: Introduction, Mafic Lavas and Re-evaluation of Mantle Source Components

The bimodal NW Etendeka province is located at the continentalend of the Tristan plume trace in coastal Namibia. It comprisesa high-Ti (Khumib type) and three low-Ti basalt (Tafelberg,Kuidas and Esmeralda types) suites, with, at stratigraphicallyhigher level, interstratified high-Ti latites (three units)and quartz latites (five units), and one low-Ti quartz latite.Khumib basalts are enriched in high field strength elementsand light rare earth elements relative to low-Ti types and exhibittrace element affinities with Tristan da Cunha lavas. The unradiogenic²⁰⁶Pb/²⁰⁴Pb ratios of Khumib basalts are distinctive, most plottingto the left of the 132 Ma Geochron, together with elevated ²⁰⁷Pb/²⁰⁴Pbratios, and Sr–Nd isotopic compositions plotting in thelower ¹⁴³Nd/¹⁴⁴Nd part of mantle array (EM1-like). The low-Tibasalts have less coherent trace element patterns and variable,radiogenic initial Sr (     

Comparisons on seasonal and annual variations of δ~(18)O in precipitation

interpretationofpaleoclimaticrecordsinicecore(Dansgaardetal.,1969;Rozanskietal.,1997;Yao,1999;Thompsonetal.,2000).SincethefirstdeepicecorewasdrilledinGreenlandin1966(Dansgaardetal.,1969),hundredsoficecoreswereobtainedsuccessivelyfromicesheetsinAntarcticaandArctic,andmountainglaciersatmid-highlatitudes,fundedbynumerousresearchprogramsonglobalclimateandenvironmentalchange.Theseicecoresprovideuniqueandvaluablefirst-handinformationinrecoveringglobalpaleoenvironmentalrecordsandforecastingfuturecl…     

Weights of Evidence Modeling of Mineral Potential: A Case Study Using Small Number of Prospects,Abra, Philippines

Weights of evidence (WofE) modeling usually is applied to map mineral potential in areas with large number of deposits/prospects. In this paper, WofE modeling is applied to a case study area measuring about 920 km² with 12 known porphyry copper prospects. A pixel size of 100 m × 100 m was used in the spatial data analyses to represent in a raster-based GIS lateral extents of prospects and of geological features considered as spatial evidence. Predictor maps were created based on (a) estimates of studentized values of positive spatial association between prospects and spatial evidence; (b) proportion of number of prospects in zones where spatial evidence is present; and (c) geological interpretations of positive spatial association between prospects and spatial evidence. Uncertainty because of missing geochemical evidence is shown to have an influence on tests of assumption of conditional independence (CI) among predictor maps with respect to prospects. For the final predictive model, assumption of CI is rejected based on omnibus test but is accepted based on a new omnibus test. The final predictive model, which delineates 30% of study area as zones with potential for porphyry copper, has 83% success rate and 73% prediction rate. The results demonstrate plausibility of WofE modeling of mineral potential in large areas with small number of mineral prospects.     

Modern stable isotopic (δ18O, δ2H, δ13C) variation in terrestrial,fluvial, estuarine and marine waters from north‐central Sarawak,Malaysian Borneo

Stable isotope data on humid tropical hydrology are scarce and, at present, no such data exist for Borneo. Delta¹⁸O, δ²H and δ¹³C were analysed on 22 water samples from different parts of the Sungai (river) Niah basin (rain, cave drip, rainforest pool, tributary stream, river, estuary, sea) in north‐central Sarawak, Malaysian Borneo. This was done to improve understanding of the modern stable isotope systematics of the Sungai Niah basin, essential for the palaeoenvironmental interpretation of the Late Quaternary stable isotope proxies preserved in the Great Cave of Niah. The Niah hydrology data are put into a regional context using the meteoric water line for Southeast Asia, as derived from International Atomic Energy Agency/World Meteorological Organization isotopes in precipitation network data. Although the Niah hydrological data‐set is relatively small, spatial isotopic variability was found for the different subenvironments of the Sungai Niah basin. A progressive enrichment occurs towards the South China Sea (δ¹⁸O ?4·6‰; δ²H ?29·3‰; δ¹³C ?4·8‰) from the tributary stream (δ¹⁸O ?8·4‰; δ²H ?54·7‰; δ¹³C ?14·5‰) to up‐river (δ¹⁸O c. ?8‰; δ²H c. ?51‰; δ¹³C c. ?12‰) and down‐river values (δ¹⁸O c. ?7·5‰; δ²H c. ?45‰; δ¹³C c. ?11‰). This is thought to reflect differential evaporation and mixing of different components of the water cycle and a combination of depleted biogenic δ¹³C (plant respiration and decay) with enriched δ¹³C values (due to photosynthesis, atmospheric exchange, mixing with limestone and marine waters) downstream. Cave drip waters are relatively enriched in δ¹³C as compared to the surface waters. This may indicate rapid degassing of the cave drips as they enter the cave atmosphere. Copyright © 2005 John Wiley & Sons, Ltd.     

Geochemistry of ore-forming fluids and geological significance of the Kuoerzhenkuola gold field in Xinjiang, China

The Kuoerzhenkuola gold field (including the Kuo- erzhenkuola and the Buerkesidai gold deposits), lo- cated 68 km east of Jimunai County in northern Xing- jiang, China, is an important component of the Sawuer gold belt which is the eastward extending part of the Zarma-Sawur gold-copper belt in Kazakhstan. Some studies are concerned with the geology of the gold ores[1―3], the associated volcanic rocks[4], radiogenic isotope[5―8], and the ore-forming environment[8]. Most researchers inferr…     

Isotopic evidence of TSR origin for natural gas bearing high H_2S contents within the Feixianguan Formation of the northeastern Sichuan Basin, southwestern China

Isotopic evidence of TSR origin for natural gas bearing high H2S contents 1961 As the hazardous component of natural gas, the ex-istence of H2S, due to its extremely strong toxicity and corrosivity, not only decreases the percentage of hy-drocarbon gas within natural gas and reduces its in-dustrial value, it also threatens each aspect of drilling and exploitation. It frequently causes serious safety accidents[1] and leads to the E&P cost and risk of natural gas with higher H2S contents be…     

Microthermometric measurement of fluid inclusions and its constraints on genesis of PGE-polymetallic deposits in Lower Cambrian black rock series, southern China

Systematic microthermometric measurements of fluid inclusions in the PGE-polymetallic deposits hosted in the Lower Cambrian black rock series in southern China were performed, and the results suggest: (1) there exist two types of fluid inclusions. TypeⅠis of NaCl-H2O system with low-medium salinity, and its homogenization temperatures (Th) and salinities are 106.9- 286.4℃ and ( 0.8- 21.8) wt%NaCl eq. respectively; TypeⅡ is of CaCl2-NaCl-H2O system with medium-high salinities, and its homogenization temperatures and salinities range from 120.1℃ to 269.6℃ and ( 11.4- 31.4) wt%NaCl eq., respectively. The typeⅡ fluid inclusions have been discovered for the first time in this kind of deposits; (2) two generations of ore-forming fluids were recognized. Characteristics of fluid inclusions in the PGE-polymetallic ores and carbonate-quartz stockworks in the underlying phosphorites are almost of no difference, they may represent ore-forming fluids at the main metallogenic stage. The peak value of homogenization temperature of those fluid inclusions is about 170℃, while their salinities possess a remarkable bimodal distribution pattern with two peak values of (27-31) wt%NaCl eq. and (4-6) wt%NaCl eq. On the contrary, fluid inclusions in the carbonate-quartz veins in the hanging wall may represent ore-forming fluids at the post-metallogenetic stage. The homogenization temperatures and the peak values of salinities are mostly 130-170℃ and (12-14) wt%NaCl eq., respectively; (3) nobel gas isotopic composition analyses in combination with the microthermometric measurements of fluid inclusions suggest that the ore-forming fluids at the main metallogenetic stage were probably derived from mixing of basinal hot brines with the CaCl2-NaCl-H2O system and seawater with the NaCl-H2O system; (4) in the Early Cambrian, the basinal hot brines were trapped in the Caledonian basins, which were distributed along the southern margin of the Yangtze Craton, and where giant thick sediments were accumulated, and expelled and migrated laterally along the strata because of the pressure caused by overlying sediments. The basinal hot brines absorbed Ni, Mo, V, PGE from the surrounding rocks and were transformed into ore-bearing hydrothermal fluids with the CaCl2-NaCl-H2O system and medium-high salinities, then ascended along faults and mixed with seawater of the NaCl-H2O system, and finally PGE-polymetallic deposits or occurrences were formed in the black rock series.     

Fractionation mechanism of stable isotope in evaporating water body

Under Rayleigh equilibrium condition, stable isotopic ratio in residual water increases with the decrease of the residual water proportion f exponentially, and the fractionation rate of stable isotopes is inversely proportional to temperature. However, under kinetic evaporation condition, the fractionation of stable isotopes is not only related to the phase temperature but also influenced by the atmospheric humidity and the mass exchange between liquid and vapor phases. The ratio δ in residual water will not change with f after undergoing evaporation of a long time for great relative humidity. The rate that the evaporating water body reaches isotopic steady state is mainly dependent on the relative humidity in atmosphere. The analysis shows that the actual mean linear variety rates, about -30.0, of the δ18O in residual water versus the residual water proportion at Nagqu and Amdo stations are consistent with the simulated process under temperature of 20 oC and relative humidity of 50%. The distillation line simulated under Rayleigh equilibrium condition is analogous to the global meteoric water line (MWL) as the temperature is about 20 oC. Under non-equilibrium condition, the slope and constant values of distillation line are directly proportional to temperature and relative humidity. According to the basic data, the simulated distillation line is very consistent with the actual distillation line of Qinghai Lake.     

Evolution of Hydrothermal System at the Dizon Porphyry Cu-Au Deposit, Zambales, Philippines

Abstract. Evolution of hydrothermal system from initial porphyry Cu mineralization to overlapping epithermal system at the Dizon porphyry Cu‐Au deposit in western central Luzon, Zambales, Philippines, is documented in terms of mineral paragen‐esis, fluid inclusion petrography and microthermometry, and sulfur isotope systematics. The paragenetic stages throughout the deposit are summarized as follows; 1) stockwork amethystic quartz veinlets associated with chalcopyrite, bornite, magnetite and Au enveloped by chlorite alteration overprinting biotite alteration, 2) stockwork quartz veinlets with chalcopyrite and pyrite associated with Au and chalcopyrite and pyrite stringers in sericite alteration, 3) stringer quartz veinlets associated with molybdenite in sericite alteration, and 4) WNW‐trending quartz veins associated with sphalerite and galena at deeper part, while enargite and stibnite at shallower levels associated with advanced argillic alteration. Chalcopyrite and bornite associated with magnetite in quartz veinlet stockwork (stage 1) have precipitated initially as intermediate solid solution (iss) and bornite solid solution (bnss), respectively. Fluid inclusions in the stockwork veinlet quartz consist of gas‐rich inclusions and polyphase inclusions. Halite in polyphase inclusions dissolves at temperatures ranging from 360d?C to >500d?C but liquid (brine) and gas (vapor) do not homogenize at <500d?C. The maximum pressure and minimum temperature during the deposition of iss and bnss with stockwork quartz veinlets are estimated to be 460 bars and 500d?C. Fluid inclusions in veinlet stockwork quartz enveloped in sericite alteration (stage 2) consist mainly of gas‐rich inclusions and polyphase inclusions. In addition to the possible presence of saturated NaCl crystals at the time of entrapment of fluid inclusions that exhibit the liquid‐vapor homogenization temperatures lower than the halite dissolution temperatures in some samples, wide range of temperatures of halite dissolution and liquid‐vapor homogenization of polyphase inclusions from 230d?C to >500d?C and from 270d?C to >500d?C, respectively, suggests heterogeneous entrapment of gaseous vapor and hypersaline brine. The minimum pressure and temperature are estimated to be about 25 bars and 245d?C. Fluid inclusions in veinlet quartz associated with molybdenite (stage 3) are dominated by gas‐rich inclusions accompanied with minor liquid‐rich inclusions that homogenize at temperatures between 350d?C and 490d?C. Fluid inclusions in vuggy veinlet quartz associated with stibnite (stage 4) consist mainly of gas‐rich inclusions with subordinate polyphase inclusions that do not homogenize below 500d?C. Fluid inclusions in veinlet quartz associated with galena and sphalerite (stage 4) are composed of liquid‐rich two‐phase inclusions, and they homogenize into liquid phase at temperatures ranging widely from 190d?C to 300d?C (suggesting boiling) and the salinity ranges from 1.0 wt% to 3.4 wt% NaCl equivalent. A pressure of about 15 bars is estimated for the dilute aqueous solution of 190d?C from which veinlet quartz associated with galena and sphalerite precipitated. In addition to a change in temperature‐pressure regime from lithostatic pressure during the deposition of iss and bnss with stockwork quartz veinlets to hydrostatic pressure during fracture‐controlled quartz veinlet associated with galena and sphalerite, a decrease in pressure is supposed to have occurred due to unroofing or removal of the overlying piles during the temperature decrease in the evolution of hydrothermal system. The majority of the sulfur isotopic composition of sulfides ranges from ±0 % to +5 %. Sulfur originated from an iso‐topically uniform and homogeneous source, and the mineralization occurred in a single hydrothermal system.