地理空间的数学定义及定位型地图符号的制约因素分析

给出了地理空间的数学定义 ,推导了制图区域、地图投影、制图物体及其在椭球面和地图平面上的定位等概念 ,揭示了同一平面位置上可以依制图目的的不同而分别表示多种事物的性质或量值的基本原理 ,阐释了对同一制图区域进行多专题制图的客观条件和物理基础。     

地球重力场、重力、重力梯度在三维直角坐标系中的表达式

现代卫星重力测量主要利用星载GPS接收机、加速度计、星载测距仪等来确定重力卫星的轨道 ,削弱非保守力的干扰 ,由此根据卫星的位置、速度及其变率来确定地球重力场。而上述GPS等星载仪器所提供的数据 ,包括卫星轨道坐标及其速率、扰动加速度、星间距离及其变率 ,都是以三维直角坐标 (x ,y ,z)的形式表示的 ,因此 ,地球重力场、重力和重力梯度在三维直角坐标系中的表达式在卫星重力解算中具有实际意义     

Histogram and variogram inference in the multigaussian model

Several iterative algorithms are proposed to improve the histogram and variogram inference in the framework of the multigaussian model. The starting point is the variogram obtained after a traditional normal score transform. The subsequent step consists in simulating many sets of gaussian values with this variogram at the data locations, so that the ranking of the original values is honored. The expected gaussian transformation and the expected variogram are computed by an averaging operation over the simulated datasets. The variogram model is then updated and the procedure is repeated until convergence. Such an iterative algorithm can adapt to the case of tied data and despike the histogram. Two additional issues are also examined, referred to the modeling of the empirical transformation function and to the optimal pair weighting when computing the sample variogram.     

Correcting method of eddy covariance fluxes over non-flat surfaces and its application in ChinaFLUX

Although Eddy Covariance (EC) technique is one of the best methods for estimating the energy and mass exchanges between underlying surface and atmosphere in micrometeorology, errors and uncertainties still exist without necessary corrections. In this paper, we will focus on the effect of coordinate system on the eddy fluxes. Based on the data observed over four sites (one farmland site, one grassland site and two forest sites), the effects of three coordinate system transforming methods (Double Rotation-DR, Triple Rotation-TR and Planar Fit-PF)on the turbulent fluxes are analyzed. It shows that (i) the corrected fluxes are more or less than the uncorrected fluxes, which is related mainly to the sloping degree of surface, wind speed and wind direction; and (ii) pitch angle has a sinusoidal dependence on wind direction, especially in the regular sloping terrain; and (iii) PF method is something like the simplification of TR or DR,and there are not obvious distinctions in correction in sloping grassland and flat farmland, but PF method is not suitable for uneven and irregular forest sites.     

Mineralogical changes during thermal demagnetization of natural continental sandstones

We study the mineralogical changes suffered by specimens of natural miocene red and green continental sandstones (from Pozuelos Formation and Tiomayo Formation) cropping out in the Argentine Puna that increase their bulk magnetic susceptibility and change color when thermally treated. We hypothesize that on heating siderite, which is present in small quantities as cement in the studied sandstones, would oxidize and decompose into maghemite and/or magnetite. Subsequent heating to higher temperatures sometimes would bring about the conversion of maghemite and/or magnetite to hematite. Mössbauer spectroscopy proved to be a very valuable tool for the determination of the presence of siderite in small amounts in the studied samples. The present results show that further work is needed in order to fully understand the mineralogical changes suffered by continental sandstones during heating. The characterization of such changes occurred during laboratory routines is relevant, since they can help to better understand natural processes.     

Polymorphic phase transition in Superhydrous Phase B

We synthesized superhydrous phase B (shy-B) at 22 GPa and two different temperatures: 1200°C (LT) and 1400°C (HT) using a multi-anvil apparatus. The samples were investigated by transmission electron microscopy (TEM), single crystal X-ray diffraction, Raman and IR spectroscopy. The IR spectra were collected on polycrystalline thin-films and single crystals using synchrotron radiation, as well as a conventional IR source at ambient conditions and in situ at various pressures (up to 15 GPa) and temperatures (down to −180°C). Our studies show that shy-B exists in two polymorphic forms. As expected from crystal chemistry, the LT polymorph crystallizes in a lower symmetry space group (Pnn2), whereas the HT polymorph assumes a higher symmetry space group (Pnnm). TEM shows that both modifications consist of nearly perfect crystals with almost no lattice defects or inclusions of additional phases. IR spectra taken on polycrystalline thin films exhibit just one symmetric OH band and 29 lattice modes for the HT polymorph in contrast to two intense but asymmetric OH stretching bands and at least 48 lattice modes for the LT sample. The IR spectra differ not only in the number of bands, but also in the response of the bands to changes in pressure. The pressure derivatives for the IR bands are higher for the HT polymorph indicating that the high symmetry form is more compressible than the low symmetry form. Polarized, low-temperature single-crystal IR spectra indicate that in the LT-polymorph extensive ordering occurs not only at the Mg sites but also at the hydrogen sites.     

Rb2Ca[B4O5(OH)4]2·8H2O溶解及相转化过程的研究

利用IR光谱和Raman光谱等实验手段,对25℃时Rb2Ca[B4O5(OH)4]2·8H2O的溶解及相转化过程进行了初步探索,结果表明,Rb2Ca[B4O5(OH)4]2·8H2O溶于水后,硼在溶液中主要以B(OH)3和[B(OH)4]-的形式存在,残留固相由开始的无定形水合三硼酸钙,最终部分转变为Ca2[B3O3(OH)5]2·8H2O晶体。     

基于规则的OpenStreetMap数据模型转换

周边区域地理信息的获取是我国地缘环境研究中的一个难题,志愿者地理信息(volunteered geographic information,VGI)的兴起为解决该难题提供了一个可行的方法。在目前一系列的VGI项目中,OpenStreetMap(OSM)是比较领先的应用,但OSM数据模型不同于我国周边应用的专业矢量数据模型,因此,利用OSM数据时首先需要对其进行模型转换。有鉴于此,本文提出了一种基于规则的OSM数据到专业应用矢量数据模型转换方法。该方法首先利用OSM定义的几何类型与地物属性作为分类依据,建立了模型转换基本规则库;对于志愿者根据自己的理解自行标注未包含在基本规则库中的目标采用人机交互方式进行模型转换,并在此过程中不断完善规则库,利用越南与巴基斯坦数据进行实验,最终形成了包括2 344条转换规则的模型转换规则库,为OSM数据模型到专业应用矢量数据模型的转换提供了一条可行途径。     

基于FME的国家基本比例尺图幅坐标系转换研究

我国测绘成果长期存在坐标系统不统一的现状,使得不同坐标系测绘成果的使用存在一定的局限性,无法充分地利用测绘成果。本文以1∶10 000比例尺成果数据从西安80系到国家2000系转换为例,详细地介绍了基于FME软件零编程实现坐标系转换的方法。     

基于OGR的勘测定界坐标数据格式转换方法研究

勘测定界界址点坐标交换文件是国土资源管理工作中时常用到的一种空间数据格式,具有一般文本文件易读易改的特性,但缺少专业GIS软件应用支持,需要转换为通用的GIS数据格式才能进行更广泛的应用。为尽可能简化操作难度和降低软件购置成本,本文从底层开发的角度思考,基于OGR开源类库的运行机制总结了数据转换的技术流程,在VC++环境下开发了简单易用的数据转换工具,实现了自动转换为Shapefile文件的目标,对其他格式的GIS数据转换方法研究具有一定的借鉴意义。