The log-normal distribution for hydraulic conductivity of compacted clays: Two or three parameters?

Risk and uncertainty assessments for waste containment systems employing clay barriers often include spatial variability in the hydraulic conductivity as part of the analysis. The two-parameter log-normal distribution is often used to describe the spatial variability, but for compacted clays the three-parameter form can be more appropriate. A statistical hypothesis test was developed that can be used to determine if the two- or three-parameter form of the log-normal distribution is more appropriate. The test is based on a likelihood ratio, comparing likelihood functions for the two- and three-parameter forms at their maximums. Likelihood functions are used assuming that a data set can be segregated into a set of distinct groups of hydraulic conductivities. A step-by-step calculation procedure is described and the test is applied to data collected from 45 sites.     

Permeability of Hydraulic Fills and Barricade Bricks

Permeability is one of the most important parameters in the design of hydraulic backfilling of mine stopes. A simple and reproducible method was developed for preparing reconstituted hydraulic fill sample in the laboratory, that is representative of the hydraulic fill in the mine stope, replicating the slurry sedimentation process taking place in the mine. Constant head and falling head permeability tests were carried out on the samples, giving consistent results. A brick permeameter was developed to study the flow characteristics of the porous barricade bricks under one-dimensional flow, simulating the flow conditions in the mine. Three different methods were used to determine the permeability of the brick and the results showed very good agreement. This is the first rational attempt to measure the permeability of the porous barricade bricks that are used to close the horizontal access drives in the mines, thus retaining the hydraulic fill. The measurements show that the permeability of the barricade brick is about two to three orders of magnitude greater than that of the hydraulic fill.     

基于微电子系统（MEMS）加速度地震勘探三分量数字检波器简介

基于微电子机械系统（MEMS）制成的微加速度三分量数字地震检波器。集数据采集、处理及传输功能干一体，在结构模型、工作原理、性能指标控制等方面不同于常规检波器，其信号幅值在低于自然频率范围内没有衰减。因其独特的制造技术，MEMS检波器具有超低噪声，大动态范围和极高的向量保真度性能。     

Dynamics and interaction of organic carbon, turbidity and bacteria in a karst aquifer system

The dynamics of organic carbon (OC), turbidity, faecal indicator bacteria and physicochemical parameters was studied in a karst system near Yverdon, Switzerland. Online measurements and sampling were done at a swallow hole draining an agricultural surface (the input), and two groups of springs (the outputs) that often show bacterial contamination. A fluorescent tracer that was injected into the swallow hole during low-flow conditions first arrived at the springs 10–12 days after injection; the total recovery rate was 29%. Previous tracer tests during high-flow conditions gave shorter travel times. After a major rainfall event, a primary turbidity peak was observed at the springs. It coincides with the rising limb of the hydrograph, indicating remobilisation of autochthonous particles from the aquifer. A secondary turbidity peak occurs several days later, suggesting the arrival of allochthonous particles from the swallow hole. Wider peaks of OC and bacteria were observed simultaneously. Applying methods from molecular microbiology (PCR-DGGE) allowed characterisation of the bacterial communities at the swallow hole and the springs. The results demonstrate that the swallow hole is an important source of groundwater contamination, while its contribution to aquifer recharge is insignificant. OC appears to be a better indicator for bacterial contamination than turbidity.     

吉林台爆破料应力应变关系的三轴试验研究

通过室内大型三轴实验，研究了吉林台水库爆破料在不同级配下的应力应变关系，得到了在一定击实功下爆破料的最大干密度随细料含量变化的规律，分析了爆破料在不同级配和不同围压下应力与应变的变化规律、轴向应变与体积应变的关系及抗剪强度变化特性．从微观的角度说明了变化规律产生的原因，得出爆破料的抗剪强度随级配的变化而变化的规律．     

条带开采煤柱稳定性的试验模拟与数值分析——以山东省济宁市太平煤矿为例

以山东省济宁市太平煤矿为例，采用煤柱模拟试验和数值分析手段，对薄基岩条带开采时所留设煤柱的应力应变状态、煤柱强度结构及煤柱长期稳定性进行了深入的分析与研究，揭示了煤柱稳定性及煤柱应力分布与条采尺寸、采出率、覆岩特征的相互关系，进行了条带煤柱的稳定性评价，为工程实践提供了理论依据。     

粉煤灰浸出特性试验研究

利用浸出试验方法,对火电厂粉煤灰进行浸出特性的测定,对其有害特性进行鉴别并分析其浸出规律,从而为地下水受粉煤灰排水影响后的水质预测、堆灰场选址、环境影响评价提供依据.     

绿片岩三轴流变力学特性的研究(Ⅰ):试验结果

为了解锦屏一级水电站坝基绿片岩的流变力学特性，采用岩石全自动流变伺服仪对绿片岩进行了三轴压缩流变试验。基于试验结果，研究了绿片岩在不同围压作用下的轴向应变以及侧向应变随时间的变化规律，讨论了流变特性对岩石应力一应变曲线的影响，探讨了不同应力水平下的轴向以及侧向流变速率变化趋势，分析了不同围压下流变的破裂机制，掌握了绿片岩三轴流变的基本规律，从而为该水电站工程流变数值分析时参数的辨识提供了可靠的依据。     

绿片岩三轴流变力学特性的研究(II):模型分析

首先,基于在岩石全自动流变伺服仪上得到的绿片岩三轴流变试验曲线,采用五元件线性粘弹性模型对表现为粘弹性流变特性的曲线进行了辨识,获得了绿片岩的粘弹性流变参数;然后,提出了一个新的非线性粘性元件,并将其与塑性体并联起来,得到一个新的非线性粘塑性体(NVPB),该体能充分反映岩石的加速流变特性:同时,将NVPB模型与五元件粘弹性模型串联起来,建立了一个新的岩石七元件非线性粘弹塑性流变模型。采用绿片岩加速流变全过程曲线,对提出的岩石七元件非线性粘弹塑性流变模型进行了辨识,得到了岩石七元件非线性粘弹塑性流变模型的材料参数。流变模型与试验结果的比较,显示了所建模型的正确性与合理性。     

地下导线随盾构推进逐段接测中的可靠性检验

盾构法施工的要点是需要在井下布设高精度的控制支导线，当我们根据盾构推进进度对导线接测时，由于观测条件、观测方法、观测仪器基本相同，但观测、的成果往往会存在一定的差异，有时我们无法直接判断成果的正确与否，此时，采用测量平差中的统计检验的方法来分析这些观测数据，可以取得比较满意的结果。