甘肃小柳沟钨多金属矿地质特征及成矿模式

小柳沟钨多金属矿于 90年代初发现 ,目前已具大型、超大型规模。共有 4个矿床。成矿主要与长城系朱龙关群和隐伏花岗岩有关。该矿床成矿物质来源具双重性 ,成矿温度为中高温 ,成矿流体为中等盐度 ,同位素计算模式年龄确定其成矿于加里东期。矿床成因属于火山喷发沉积—岩浆热液改造矿床。     

华北陆块北缘西段中元古代与裂谷作用有关的铁、稀土、多金属矿床特征及成因

华北陆块北缘西段狼山—白云鄂博裂谷系中元古代形成的大型多金属矿床 ,是我国重要的铁、稀土、铜、铅、锌矿产地。矿床为产于沉积岩中热水沉积型多金属矿床。其形成受地层、构造控制 ,与裂谷作用有着密切的关系。裂谷系内外分支的地质环境及矿床矿种不同 ,导致矿床特征及成因具有一定差异。白云鄂博铁、稀土矿床为钾、钠、磷等含量较高的热水沉积型 ,霍各乞铜、铅、锌多金属矿床为与中基性火山岩有关的过渡热水沉积型 ,东升庙和甲生盘等铅、锌多金属矿床为热水沉积型。文中将对上述矿床分别进行论述。     

Sulfur Content and Isotopic Ratio of Cambro-Ordovician Carbonate Rocks from South Korea: A Possible Source for Mesozoic Magmatic-hydrothermal Ore Sulfur

Abstract: Carbonate rocks of Cambrian (18 samples) and lower-middle Ordovician (11 samples) ages from South Korea were analyzed for sulfur contents of structurally substituted sulfate (SSS) and sulfides and their δ³⁴S values. The δ³⁴S values of SSS ranging from +25.9 to +45.2 permil, are averaged as +33.6 and +33.5 permil for the Cambrian and Ordovician rocks, respectively, which indicate high δ³⁴S values of the Cambro-Ordovician seawater. The SSS contents in the carbonate rocks are low being 2.9 to 17.3 ppm S (averaged as 7.0 ppm S). Sulfide sulfur, on the contrary, is much abundant containing 3 to 1,880 ppm S and the δ³⁴S values range widely between –17.6 and +31.1 permil. Sulfide sulfur of the studied rocks excluding impure carbonates has an average content of 187 ppm S and δ³⁴S value of +12.8 permil (n=24). The estimated δ³⁴S (sulfate–sulfide) values, which range from 13.8 to 25.4 permil in general with a few exceptions from 36.5 up to 52.3 permil for some impure carbonates, may provide evidence for the persistent oceanic anoxia with its temporary recovery during the Cambro-Ordovician time.
The SSS and sulfide sulfurs have often higher δ³⁴S values than the Mesozoic-Cenozoic ore sulfur (Ishihara et al., 2000). Since carbonate rocks are very reactive with circulating hydrothermal ore solution, high δ³⁴S values of the Korean ore deposits might be caused to some extent by ³⁴S enrichment from the host carbonates, resulting in the low SSS contents observed.     

Paleomagnetic dating of Alleghanian orogenesis and mineralisation in the Mascot–Jefferson City zinc district of East Tennessee, USA

The Mascot–Jefferson City (M-JC) Mississippi Valley-type (MVT) deposits are in the Valley and Ridge province of the Appalachian orogen in East Tennessee. They have been a major source of zinc for the USA but their age is uncertain and thus their genesis controversial. About 10 specimens from each of 37 sites have been analysed paleomagnetically using alternating field and thermal step demagnetisation methods and saturation isothermal remanence methods. The sites sample limestones, dolostones, breccia clasts and sphalerite–dolomite MVT mineralisation from mines in the Lower Ordovician Kingsport and Mascot formations of the Knox Group. The characteristic remanent magnetisation (ChRM) is carried by magnetite in the limestones, by both magnetite and pyrrhotite in the dolostones and by pyrrhotite preferentially to magnetite in the mineralisation. Mineralized sites have a more intense ChRM than non-mineralised, indicating that the mineralising and magnetisation event are coeval. Paleomagnetic breccia tests on clasts at the three sites are negative, indicating that their ChRM is post-depositional remagnetisation, and a paleomagnetic fold test is negative, indicating that the ChRM is a remagnetisation, and a post-dates peak Alleghanian deformation. The unit mean ChRM direction for the: (a) limestones gives a paleopole at 129°E, 12°N (d_p=18°, d_m=26°, N=3), indicating diagenesis formed a secondary chemical remanent magnetisation during the Late Ordovician–Early Silurian; (b) dolomitic limestones and dolostone host rocks gives a paleopole at 125.3°E, 31.9°N (d_p=5.3°, d_m=9.4°, N=7), recording regional dolomitisation at 334±14 Ma (1σ); and (c) MVT mineralisation gives a paleopole at 128.7°E, 34.0°N (d_p=2.4°, d_m=4.4°, N=25), showing that it acquired its primary chemical remanence at 316±8 Ma (1σ). The mineralisation is interpreted to have formed from hydrothermal fluid flow, either gravity or tectonically driven, after peak Alleghanian deformation in eastern Tennessee with regional dolomitisation of the host rocks occurring as part of a continuum during the 20 Ma prior to and during peak deformation.     

To afforest the desert with the technology of peat composed of rotten mosses and the sustainable development of the oases

Only by providing the good conditions for the growth of plants can a favorable ecologicalenvironment on which human beings rely for existence be created. The upside-down-T dou-ble-layer water-conserving afforestation way is developed according to the situation of the short-age of water resources, low soil fertility and vast land in the arid areas. The characteristics of theafforestation way are to change the microenvironment in the root area of the plants, provide thefavorable conditions for the growth of plants, and reduce the necessary conditions for the growth ofplants in large areas in the arid regions. Meanwhile, the size of its water-conserving layer can bechanged according to the size of the planted trees. The different ways of the bottom wa-ter-conserving layer can be used according to the requirements. The afforestation way is suitablefor planting trees on a small scale and also for afforesting on a large scale under the adverse cir-cumstances in the arid areas, and has been effectively used in the afforestation in the hinterland ofTaklamakan Desert and the southern marginal zone of Gurbantonggut Desert. The prospects ofthe afforestation way are broad in afforestation and desertification control in the desert regions.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

结构振动控制的半主动磁流变质量驱动器(MR-AMD)

本文首先提出了一种新型的半主动磁流变质量驱动器（MR－AMD），该装置用磁流变驱动器替代AMD的液压驱动系统；其次采用所提出的半主动控制算法仿真分析了MR－AMD用于结构振动控制的有效性；第三，比较了半主动质量驱动器（MR－AMD）、调谐质量阻尼器（TMD）及主动质量驱动器（AMD）对同一模型结构的控制效果。分析结果表明，MR－AMD作为一种半主动质量驱动器有效地降低了结构的反应，其控制效果虽然不如具有相同质量块参数的AMD但却优于TMD，且同AMD一样具有较宽的有效频带范围。     

海洋平台结构振动的AMD主动控制参数优化分析

本文针对海洋平台结构的冰激振动和地震反应控制问题，提出了采用AMD主动控制的控制策略，结合JZ20－2MUQ平台结构进行了AMD控制系统的硬参数和软参数的优化分析，并就相应于最优参数下的AMD控制海洋平台结构冰激振动和地震反应的几种代表性工况进行了时程分析，得到了一些定性和定量的结论，为实际工程的控制设计提供了基础。本文提出的AMD主动控制方法对类似的海洋平台结构的控制问题也有参考价值。     

Seismic structural control using semi-active tuned mass dampers

This paper focuses on how to determine the instantaneous damping of the semi-active tuned mass damper (SATMD) with continuously variable damping. An off-and-towards-equilibrium (OTE) algorithm is employed to examine the control performance of the structure/SATMD system by considering the damping as an assumptive control action. The damping modification of the SATMD is carried out according to the proposed OTE algorithm, which is formulated based on analysis of the structural movement under external excitations, and the measured responses of the structure at every time instant. As examples two numerical simulations of a five-storey and a ten-storey shear structures with a SATMD on the roof are conducted. The effectiveness on vibration reduction of MDOF systems subjected to seismic excitations is discussed. Analysis results show that the behavior of the structure with a SATMD is significantly improved and the feasibility of applying the OTE algorithm to the structural control design of SATMD is also verified.     

Phénomènes karstiques fossiles et actuels au sein des formations métamorphiques silico-alumineuses de la nappe pan-africaine de Yaoundé (Sud-Cameroun)Fossil and present-time karstic phenomena in silico-aluminous metamorphic formations of the Pan-African nappe of Yaoundé (South-Cameroon)

Numerous karstic features have been recognised in the non-carbonaceous micaschists and gneisses of the Yaoundé Pan-African nappe, south of Cameroon. It is shown that their formation was controlled by the structural features of the rocks. The wells and the pipes in the bedrock outcrops point out a current karstification process, resulting from the plagioclase dissolution by the acid rain waters. Hill wall alveoli and caves, of pre-Miocene age, are exhumed features that were done by dissolution in the aquiferous underground. To cite this article: J.-P. Vicat et al., C. R. Geoscience 334 (2002) 545–550.