About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

Semi-analytical solutions of a contaminant transport equation with nonlinear sorption in 1D

A new method to determine semi-analytical solutions of one-dimensional contaminant transport problem with nonlinear sorption is described. This method is based on operator splitting approach where the convective transport is solved exactly and the diffusive transport by finite volume method. The exact solutions for all sorption isotherms of Freundlich and Langmuir type are presented for the case of piecewise constant initial profile and zero diffusion. Very precise numerical results for transport with small diffusion can be obtained even for larger time steps (e.g., when the Courant-Friedrichs-Lewy (CFL) condition failed).     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Towards a method for postcolonial development geography? Possibilities and challenges

In this paper we explore the contours of a 'method' for postcolonial development geography, which makes it possible to imagine another 'world-picturing'. We suggest three steps towards such a method. First, we propose that a postcolonial method involves thinking about why we are doing research in the south in the first place; how we come to and produce our questions; and how we analyze and represent our findings based on our subject positionings. Second, that we need to recognize theorization as an inherent part of method, rethink how we currently theorize and reconfigure our methods of theorization to address wider political aims. Problematizing theorization helps challenge the universalism of Eurocentric theories, thus enabling development geography to move towards more decolonized versions and visions. Finally, that this must be accompanied by firmer recognition of our multiple investments – personal, institutional and geopolitical – and how they frame the possibilities for change. These are some possible steps that we think can reconfigure the 'scholarly track' that postcolonial development geographers traverse.     

基于有限差分法的抗滑桩计算机辅助设计

基于地基系数“m-m”法、“m-k”法、“k-k”法的原理,考虑桩顶和桩底边界条件以及桩在滑动面处位移、转角、弯矩和剪力的连续条件,可解得桩身各节点的位移和内力,提出了进行抗滑桩全桩内力计算的有限差分法。根据差分方程并用VB6.0编制了实用的计算程序,既可避免繁琐的查表计算,提高计算速度,又可提高计算精度,直观生动,真正实现了人机交互,在界面的引导下,设计人员可完成全部计算,并绘出内力图形和抗滑桩截面配筋图,使设计更方便快捷,该软件可以极大地提高生产效率,降低工程造价,从而实现抗滑桩的优化设计。最后采用上述方法对某滑坡的悬臂抗滑桩进行了设计与计算。     

福建平潭虎潮山滑坡成因机理分析与评价

虎潮山滑坡位于平宏公路12k 704~12k 884段北侧山坡体上,是平潭海岛通往陆地的唯一公路通道。论文通过定性的工程地质分析和定量计算评价了虎潮山坡体稳定性的变化趋势,提出改建公路超挖深切坡脚和持续长时间强降雨导致的孔隙水压力作用是边坡发生滑动破坏的主要因素。     

航天INSAR复影像对的自动快速匹配

针对航天INSAR主、辅影像数据的特点，提出了加大匹配窗口、加大锚点间隔的匹配策略，以提高匹配的可靠性和速度。在匹配过程中，综合利用轨道参数和强度影像金字塔进行粗匹配，并对强度影像采用相关系数与最小二乘相结合的双向匹配方案，实现了自动、快速、高可靠性和高精度的航天INSAR复影像匹配。最后总结了航天INSAR复影像匹配的特点。     

To afforest the desert with the technology of peat composed of rotten mosses and the sustainable development of the oases

Only by providing the good conditions for the growth of plants can a favorable ecologicalenvironment on which human beings rely for existence be created. The upside-down-T dou-ble-layer water-conserving afforestation way is developed according to the situation of the short-age of water resources, low soil fertility and vast land in the arid areas. The characteristics of theafforestation way are to change the microenvironment in the root area of the plants, provide thefavorable conditions for the growth of plants, and reduce the necessary conditions for the growth ofplants in large areas in the arid regions. Meanwhile, the size of its water-conserving layer can bechanged according to the size of the planted trees. The different ways of the bottom wa-ter-conserving layer can be used according to the requirements. The afforestation way is suitablefor planting trees on a small scale and also for afforesting on a large scale under the adverse cir-cumstances in the arid areas, and has been effectively used in the afforestation in the hinterland ofTaklamakan Desert and the southern marginal zone of Gurbantonggut Desert. The prospects ofthe afforestation way are broad in afforestation and desertification control in the desert regions.     

Bedrock structure in Adapazari, Turkey—a possible cause of severe damage by the 1999 Kociaeli earthquake

The 1999 Kocaeli earthquake brought serious damage to downtown of Adapazari. To study why strong motions were generated at the town, a bedrock structure was investigated on the basis of Bouguer gravity anomaly, and SPAC and H/V analyses of microseisms. It was revealed that, the basin consists of three narrow depressions of bedrock with very steep edges, extending in E–W or NE–SW directions along the North Anatolia faults, and the depth to bedrock reaches 1000 m or more. Downtown of Adapazari is located 1–2 km apart from the basin-edge. It is considered that, the specific configuration of bedrock amplifies ground motions at the downtown area by focusing of seismic waves and/or interference between incident S-waves and surface-waves secondarily generated at the basin-edge. Studying 3D bedrock structure is an urgent issue for microzoning an urban area in a sedimentary basin.