煤炭资源勘查误差理论研究

对煤炭资源勘查资源量与客观物质量之间差值的误差理论探讨,提出误差由真值误差、系统误差和离差3个基本部分组成,其中真值误差是不可消除的观测误差、系统误差是控制网度所决定的准确度标准、而离差是由地质构造及矿床形态的多解性产生的资源量波动。在此基础上,构筑了一个关于误差的数学模型,最后应用误差理论对现行勘查工作中常见的错误进行分析,并就如何避免错误及减少误差提出了见解。     

基于BP神经网络的地图数字化误差纠正

由于在数字化采集过程中不可避免地会引入系统误差和异常误差,因此消除和削弱这些误差的影响是提高空间数据质量的关键。然而由于图纸变形不均匀,扫描误差又极其复杂,用常规的多项式拟合技术只能消除部分有规律的系统误差,很难完全消除它们对地图数字化坐标的影响。BP神经网络是一个高度非线性映射系统,能以任意精度逼近。结合地图数字化坐标改正的特点,本文给出了基于BP神经网络地图数字化坐标误差纠正的方法,并通过实例验证了该方法的有效性。     

供水管网地理信息系统中爆管分析的算法研究

爆管关阀分析是供水管网地理信息系统中重要的空间分析功能之一,目前已建系统的爆管分析功能存在着算法繁琐或功能简单、不具通用性等缺点。本文以高质量的源数据为基础,根据系统和爆管分析的需求建立合理的数据模型,设计了爆管关阀分析算法,该算法克服现有算法的不足,剔除了可关可不关的阀门,得到正确、经济的关阀门方案,并列出了受影响的用户。将此设计方案应用于"新疆石油管理局供水地理信息系统"中,成功地实现了爆管分析,体现出了该算法简洁、高效、准确、通用的优越性。     

高原山区局部大地水准面精化方法研究

局部大地水准面精化的实质是精确计算出大地水准面的起伏变化情况。一般情况下,需要密度足够的重力数据,依重力异常密集计算大地水准面差距或高程异常。但是在大陆西部高原山区重力点密度是不够的,无法达到大地水准面精化的目的。本文从理论上证实了用地形和岩石密度数据进行局部大地水准面精化的可行性。     

Calculating Pollution Indices by Heavy Metals in Ecological Geochemistry Assessment and a Case Study in Parks of Beijing

Pollution index is a powerful tool for ecological geochemistry assessment. The commonly used pollution indices by heavy metals in soils and sediments were classified as two types of single index and integrated index in an algorithm point of view. Four single indices of contamination factor (or concentration factor), ecological risk factor, enrichment factor, and index of geo-accumulation were illustrated, and the reference values for calculating single indices were distinguished into background levels and threshold pollution values. Eight integrated indices were divided into two groups. One group is suitable for the normal distribution single indices including the sum, average, weighted average,vector modulus, and Nemerow pollution indices, and the other for log-normal distribution including the product, root of product, and weighted power product pollution indices. Using background levels as reference values, five contamination classes were divided, and the terminologies are suggested for the single and integrated indices to unify the assessment results. Software of EGAPI was developed in a single document interface to calculate the four single and eight integrated indices by heavy metals to assess the quality of soil and sediment ecological geochemistry. Pollution indices by heavy metals of Cu,Pb, and Zn in soils in parks of Beijing were calculated using EGAPI software, and these five contamination classes and terminologies suggested in this study were evaluated and used. Results ofintegrated indices of Cu, Pb, and Zn in soils indicated that the soil qualities are unpolluted as a whole and varied from low polluted to unpolluted status from the center to the outskirts of Beijing City.     

Fault Characteristics in Longmen Mountain Thrust Belt,Western Sichuan Foreland Basin,China

Through field geological survey,the authors found that abundant thrust faults developed in the Longmen (龙门) Mountain thrust belt.These faults can be divided into thrust faults and strike-slip faults according to their formation mechanisms and characteristics.Furthermore,these faults can be graded into primary fault,secondary fault,third-level fault,and fourth-level fault according to their scale and role in the tectonic evolution of Longmen Mountain thrust belt.Each thrust fault is composed of several secondary faults,such as Qingchuan (青川)-Maowen (茂汶) fault zone is composed of Qiaozhuang (乔庄) fault,Qingxi (青溪) fault,Maowen fault,Ganyanggou (赶羊沟) fault,etc..The Longmen Mountain thrust belt experienced early Indosinian movement,Anxian (安县) movement,Yanshan (燕山)movement,and Himalayan movement,and the faults formed gradually from north to south.     

航空重力测量数学模型及其测量精度分析

基于数学和分析力学角度分别推导了航空矢量重力测量的数学模型,得到了一致的模型公式;给出了矢量模型的3个分量形式,其中垂直方向的分量就是标量重力测量的数学模型;简要介绍了我国研制成功的航空标量重力测量系统CHAGS的数据处理的过程,分析了标量重力测量中测线交叉点和重复测线的重力异常的精度;根据实测数据计算的结果表明:测线交叉点重力异常不符值的标准差约为5×10-5ms-2左右,重复测线的内符合精度优于5×10-5ms-2,达到了预期的要求。     

市政项目中长距离顶管工程若干问题探讨

顶管具有不可比拟的优越性,在市政项目中应用越来越广泛,但施工技术难度较大,长距离顶管是顶管工程中施工工艺最复杂课题之一。本文讨论了长距离顶管中易出现的技术问题及处理措施,指出顶管技术通过与精心细致、信息化施工相结合,可以广泛地应用于城市的基础建设中。     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

泥浆性能对定向钻进铺管孔壁稳定性的影响

本文通过对泥浆性能的分析,特别是对泥浆流变参数的控制与调节在定向钻进非开挖铺管中的作用及其护壁原理的分析,简要阐述了泥浆性能对定向钻进铺管孔壁稳定性的影响,对非开挖定向钻进铺管施工有一定的指导意义。