软土地基沉降计算的误差分析

对引起路堤荷载下软土地基沉降从竖应力、固结沉降、瞬时沉降和后期沉降的计算四个方面,常见计算方法误差的诸多因素,从受力、沉降原理上进行了详细分析并提出一些建议,以使沉降更为接近实际.     

Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.     

川滇黔桂76种元素地球化学图编制中分析方法与分析质量研究(一) 不同实验室产生地球化学图的相似性——以Ag、Cs、Ga、Ge为例

编制中国76种元素地球化学图将使我们首次了解元素周期表上除氢、氧及惰性气体之外所有元素在中国大陆表层的分布,川滇黔桂76种元素地球化学图的编制是这一研究项目的试点。本文以不同实验室取得的Ag、Cs、Ga、Ge分析数据为例,探索、衡量不同实验室地球化学图相似性的方法,以优选实验室进行川滇黔桂4省区约4000件组合样76种元素的大规模分析工作。     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

均匀土-箱基-结构相互作用体系的计算分析

采用通用有限元程序ANSYS，针对捱动台试验中的均匀土-箱基-结构试验进行了三维有限元分析，计算中土体的本构模型采用等效线性模型，利用面-面接触单元考虑土体与基础交界面的状态非线性。计算表明，基础底面和土体发生滑移，基础侧面和土体之间发生了滑移和脱离，上部结构柱顶加速度反应主要由基础转动引起的摆动分量组成，通过与试验结果的对照研究，二者得出的规律基本一致，验证了采用的计算模型与分析方法的合理性，为进一步计算研究和实际工程应用奠定了基础。     

有限弹性变形地壳中的地震波

地壳由半无限大的基岩上一层厚度为H^-的表土层组成，入射地震波为垂直的SH波，产生水平地面运动。当浅源大地震发生时，在极震区以外行波传播产生地面运动将使地壳介质有非线性的有限弹性变形。用小参数摄动法使非线性控制方程为线性化的小参数各阶控制方程，得出头两阶线性控制方程的解析解。     

A HORIZONTAL 2-D HYDRAULIC NUMERICAL MODEL AND IT’S APPLICATIONS TO FLOOD FORECAST

1 INTRODUCTION There were many flood disasters in China in recent years. When the water level in a river is very high, weak parts of its dike may be destroyed resulted in the submersion of the protected land and properties. It is of significance for decision-makers to exactly predict the processes of flood propagation during flood control. There are many modes of dike bursting, such as seepage destroying by overflow on top of dike caused by dike body sinking induced by piping and soil fl…     

The use of modern statistical theories in the assessment of earthquake hazard, with application to quiet regions of eastern North America

It is generally accepted that both deterministic and statistical approaches are useful for the characterization of earthquake hazard. Although the most reliable estimates of seismic hazard can only be based on an improved understanding of the earthquake mechanism, efficient utilization of the appropriate methods provided by recent statistical theories is also important in seismic risk analysis. This is especially true in regions where the connection between seismicity and geologic structure is tenuous at best. We are particularly interested in developing better statistical treatments of data for regions with little known seismic activity. To this end, we have applied three statistical methods to the historical record of seismicity in relatively quiet regions of eastern North America. These are: (1) the threshold method for tail inference, a new theory for modeling earthquakes with sizes above a given threshold, (2) the ‘bootstrap’ technique in which the characteristics of an unknown population are simulated by replacing the true population by an estimated one, and (3) a technique to estimate the number of earthquakes below a given size, in order to compensate for the under-reporting of small earthquakes in most catalogs. A combination of these techniques has been used to estimate the probabilities of future large earthquakes for the regions studied. Because of limitations imposed by existing catalogs, the size estimate used has been maximum intensity.     

桥梁隔震体系振动台试验研究(III)——测试结果分析

根据前文所述的测试结果 ,本文主要分析了隔震构造、橡胶支座水平刚度、地震输入频谱特性、地震烈度、输入方向、桥墩高度、桥墩嵌固程度等因素对隔震效果的影响 ,揭示了隔震体系耗散地震能量输入的机理 ,所得出的结论对工程实践具有指导意义。     

Bedrock structure in Adapazari, Turkey—a possible cause of severe damage by the 1999 Kociaeli earthquake

The 1999 Kocaeli earthquake brought serious damage to downtown of Adapazari. To study why strong motions were generated at the town, a bedrock structure was investigated on the basis of Bouguer gravity anomaly, and SPAC and H/V analyses of microseisms. It was revealed that, the basin consists of three narrow depressions of bedrock with very steep edges, extending in E–W or NE–SW directions along the North Anatolia faults, and the depth to bedrock reaches 1000 m or more. Downtown of Adapazari is located 1–2 km apart from the basin-edge. It is considered that, the specific configuration of bedrock amplifies ground motions at the downtown area by focusing of seismic waves and/or interference between incident S-waves and surface-waves secondarily generated at the basin-edge. Studying 3D bedrock structure is an urgent issue for microzoning an urban area in a sedimentary basin.