祁阳山字型构造质疑

结合区域构造演化背景及构造变形特征,对祁阳弧形构造的形成机制进行研究。分析表明,传统山字型构造机制难以解释祁阳弧形构造的诸多特征,且前人认为变形动力来源于东西向挤压应力场,也与印支期区域构造应力场实为NWW向的构造背景不符,因此祁阳弧形构造并不属典型山字型构造。基于研究区构造活动的客观实际,提出祁阳弧形构造的可能形成机制:NW向基底隐伏断裂和NNE-NE向主干断裂分别于印支期和燕山期产生强烈左旋走滑活动,从而使区域NNE向构造线在中段产生左旋偏转成为NNW向,从而形成S形的祁阳弧形构造。这一机制可较好解释祁阳弧形构造的若干特征,如关帝庙穹窿呈NWW走向、北反射弧构造形迹不显著、北弧弧顶脱位及内弧曲率大于外弧、南弧弧顶脱位、紫云-中田-高峰串珠状穹窿的形成等。上述认识对华南地区弧形构造研究具有一定启示意义:除山字型构造作用和砥柱作用外,还应注意断裂走滑等其他构造活动对弧形构造的制约,以及多次构造活动叠加对构造形迹可能造成的影响。     

Income distribution dynamics and cross-region convergence in Europe

This paper presents a continuous version of the model of distribution dynamics to analyse the transition dynamics and implied long-run behaviour of the EU-27 NUTS-2 regions over the period 1995–2003. It departs from previous research in two respects: first, by introducing kernel estimation and three-dimensional stacked conditional density plots as well as highest density regions plots for the visualisation of the transition function, based on Hyndman et al. (J Comput Graph Stat 5(4):315–336, 1996), and second, by combining Getis’ spatial filtering view with kernel estimation to explicitly account for the spatial dimension of the growth process. The results of the analysis indicate a very slow catching-up of the poorest regions with the richer ones, a process of shifting away of a small group of very rich regions, and highlight the importance of geography in understanding regional income distribution dynamics.

青藏高原北部新生代陆相盆地石油地质条件及勘探前景

青藏高原北部陆相盆地中烃源岩发育层位包括始新统风火山组、渐新统雅西措组和中新统五道梁组。古近系雅西措组烃源岩,特别是灰岩属于中好烃源岩范畴,有机质类型较好,且烃源岩主体处于成熟阶段,是藏北高原新生代陆相盆地主力烃源岩的发育层位。陆相盆地储集岩较发育,储层较丰富,发育层位包括风火山组和雅西措组,其中雅西措组是储层主力分布层位。对测区分析数据表明：通天河盆地具备一定规模的生油岩厚度,而且有机质丰度为沱沱河地区最高,表明其勘探前景较好。     

准噶尔盆地西北缘三叠系层序地层与隐蔽油气藏勘探

层序地层学及层序地层原理指导下的地震资料解释为地层、岩性油气藏勘探提供了理论和技术支持。为配合准噶尔盆地西北缘油气勘探从克乌断裂带上盘向下盘、从构造油气藏向地层、岩性等隐蔽油气藏的转变,利用陆相层序地层学理论和地球物理资料,将三叠系划分为1个二级层序、5个三级层序和8个体系域,进而总结出拗陷完整型和拗陷残缺型两种层序类型。结合测井约束地震反演和井间沉积对比,探讨了三叠系砂体结构和湖侵体系域地层超覆、湖退体系域及最大湖泛面附近小规模滑塌浊积体岩性透镜体等5种圈闭发育模式。油气成藏综合条件分析指出有效圈闭和油源断层的识别是制约斜坡带岩性油气藏勘探的关键。     

准噶尔盆地西北缘克-百地区不整合面及其动力学条件

不整合及其性质和强度的确定对理解克拉玛依至百口泉地区构造变形历史和油气聚集规律具有重要意义。根据地震资料研究显示,该区二叠纪至中生代地层中存在多个不整合面,且多为构造运动的反映。其中对克-百地区构造形成具有重要影响的有四期,其一发生在中二叠统下乌尔禾组沉积后,主要表现为冲断掀斜运动,使其前的二叠纪沉积向南东方向掀斜抬升,遭受剥蚀;其二发生在三叠纪末期,对克百断裂上盘大侏罗沟断层至百口泉段的构造有重要影响;其三发生在中侏罗世末,该期构造运动在克百断裂带及其上盘表现最为清楚,以冲断为主,局部地区有褶皱现象;其四发生在早白垩世末期,表现为掀斜运动,褶皱和断裂作用相对较弱。克-百地区不同时期、不同构造部位变形的差异性与构造动力条件密切相关。     

High heat flow anomalies on an old oceanic plate observed seaward of the Japan Trench

Thirty-three new measurements on the seaward slope and outer rise of the Japan Trench along a parallel of 38°45′N revealed the existence of high heat flow anomalies on the subducting Pacific plate, where the seafloor age is about 135 m.y.. The most prominent anomaly with the highest value of 114 mW/m² is associated with a small mound on the outer rise, which was reported to be a kind of mud volcano. On the seaward slope of the trench, heat flow is variable: high (70–90 mW/m²) at some locations and normal for the seafloor age (about 50 mW/m²) at others. The spatial variation of heat flow may be related to development of normal faults and horst/graben structures due to bending of the Pacific plate before subduction, with fluid flow along the fault zones enhancing the vertical heat transfer. Possible heat sources of the high heat flow anomalies are intra-plate volcanism in the last several million years like that discovered recently on the Pacific plate east of the Japan Trench.     

A virtual voyage through 3D structures generated by chaotic mixing of magmas and numerical simulations: a new approach for understanding spatial and temporal complexity of magma dynamics

In this contribution, we present a virtual voyage through 3D structures generated by chaotic mixing of magmas and numerical simulations with the aim to highlight the power of 3D representations in the understanding of this geological phenomenon. In particular, samples of mixed juveniles from Salina island (Southern Italy) are reconstructed in 3D by serial lapping and digital montage and numerical simulations are performed by using a 3D chaotic dynamical system. Natural and simulated magma mixing structures are visualized by using several multimedia tools including animations and “virtual reality” models. It is shown that magma interaction processes can generate large spatial and temporal compositional heterogeneities in magmatic systems. The same topological structures are observed in both 3D reconstructed rock samples and chaotic numerical simulations, indicating that the mixing of magmas is governed by chaotic dynamics. The use of 3D multimedia models gives the opportunity to penetrate into magma mixing structures and to understand their significance in the context of magma dynamics. Such an approach is very powerful since multimedia tools can strongly capture the attention of the reader bringing him/her into an interactive and memorable geological experience. Electronic supplementary material  enclosed:     

Tectonics of the Simplon massif and Lepontine gneiss dome: deformation structures due to collision between the underthrusting European plate and the Adriatic indenter

This study presents a review of published geological data, combined with original observations on the tectonics of the Simplon massif and the Lepontine gneiss dome in the Western Alps. New observations concern the geometry of the Oligocene Vanzone back fold, formed under amphibolite facies conditions, and of its root between Domodossola and Locarno, which is cut at an acute angle by the Miocene, epi- to anchizonal, dextral Centovalli strike-slip fault. The structures of the Simplon massif result from collision over 50 Ma between two plate boundaries with a different geometry: the underthrusted European plate and the Adriatic indenter. Detailed mapping and analysis of a complex structural interference pattern, combined with observations on the metamorphic grade of the superimposed structures and radiometric data, allow a kinematic model to be developed for this zone of oblique continental collision. The following main Alpine tectonic phases and structures may be distinguished:

数字地质调查中多源地学数据在造山带构造单元 划分和大地构造演化研究方面的应用 ——以青海民和地区为例

多源地学数据包括遥感、地球化学和地球物理数据,介绍了利用多源地学数据进行造山带构造单元划分的方法。遥感数据在确定区域构造边界及活动断层方面的应用非常广泛,遥感影像在解译线形构造即断层方面有非常明显的效果,可以根据不同构造单元的影像差异,区分不同的地质体、线性构造及活动断层,同时用遥感数据叠加三维地形数据分析线性构造可以更加直观地解译线性构造。地球化学数据在确定大的构造边界方面具有一定的指示意义,可以根据水系沉积物的地球化学特点,运用因子分析方法确定大的构造边界。地球物理数据提供的是地质体及构造边界在深部的延伸情况,可以为研究断裂的运动学和动力学特征提供证据。     

西藏札达盆地控盆断裂有限元数值模拟

札达盆地是喜马拉雅构造带中的一个山间断陷盆地,其演化过程与盆地两侧的控盆构造密切相关。对控盆断裂的构造应力场进行模拟计算,将有助于进一步深化对本区构造控盆的认识。因此,在对盆地构造地质进行详细调查的基础上,结合本区的深部地质与地球物理资料,对札达盆地控盆断裂的构造应力场进行了模拟。计算结果表明,札达盆地的演化明显受盆地两侧边界断裂的控制,札达盆地是在整体南北向挤压应力的作用下,不同块体差异隆升作用的结果。其南侧的控盆断裂为北倾的正断层,北侧的控盆断裂为南倾的逆断层,二者共同形成了南降北升的翘板式断陷盆地运动过程,是喜马拉雅地块在陆内汇聚挤压构造环境中构造应力场调整的一种方式。