MM5模式对2008年1月25—30日我国南方强冰雪过程的数值模拟

利用NECP 1°×1°6 h再分析资料,分析2008年1月25-30日我国南方一次强降雪天气的大尺度环流形势.结果表明,高空环流波动为此次强降雪提供了有利的高空环流形势,中低层阻塞高压及其南部低涡的长期维持是导致低层锋区形成和强降雪发生的关键;由于部分地区大气垂直结构呈上下冷、中间暖的状态,致使冻雨形成.同时,利用中尺度模式MM5对此次过程进行72 h数值模拟,并以模拟结果对湖南湘潭的冰冻成因进行再分析,进一步证实了低层低温、逆温层的存在及充足的水汽是冰冻形成的主要原因.     

海拉尔盆地乌尔逊凹陷古流体动力场数值模拟

首先对地下水动力场进行数学描述,以水动力为主线,建立适合该地区的数学模型,选择正确的地质模型参数,主要采用数值计算和模拟等手段,在恢复出乌尔逊凹陷主要目的层在不同地质历史时期古水动力的基础上又恢复出古流体势的演化历史。整体上,在乌尔逊凹陷,各主要地质时期的油势演化特征为西部地区大于东部地区,乌南大于乌北,且低势区的发育有较好的继承性。最后,依据油气聚集理论,进行油气运移聚集系统的划分、油气运移方向的分析,从而得出有关研究区油气运移聚集条件的认识,主要从流体动力的角度考虑,指出有利聚集区,认为在乌尔逊凹陷苏4～苏18井区、苏132～苏17～铜2井区及巴1～巴2～巴4井区为有利油气运移聚集区。     

双相各向异性介质中弹性波方程的有限元解法及波场模拟

基于双相各向异性介质模型,首先推导了双相各向异性介质中弹性波传播的动力学方程及其Galerkin变分方程和有限元运动方程,然后给出了孔隙弹性波方程的有限元数值解法以及二维双相PTL介质中波场模拟的人为吸收边界条件. 最后,利用本文给出的有限元方法对双相PTL介质和双相各向同性介质中的弹性波传播进行了数值模拟. 结果表明:有限元方法和吸收边界条件有效、可行,在理想相界条件下,不论是从固体位移,还是从流体位移的波场快照都能看到明显的慢速拟P波;在黏滞相界情况下,能否观察到慢速拟P波,与含流体地层介质的耗散性质有关.对实际含流体介质,从流体位移分量的波场快照比从固体位移波场快照更容易观察到慢速拟P波.     

岩体质量分级的风险分析方法

提出了基于RMR岩体质量分级系统的岩体质量研究风险分析方法。该方法分析步骤如下 :(1)通过岩芯样品的现场观测和实验室试验获得分类所需的变量 ;(2 )统计分析拟合得出各变量的分布函数及参数 ;(3)运用Monte Carlo模拟方法获得 2万个RMR值 ,并将结果绘成岩体质量描述图 ;(4)利用以上结果作出岩体质量风险分析评价。该方法用于润扬长江公路大桥岩体质量评价研究获得良好效果     

模拟水深测量实习设计与实现

针对海洋测绘实践教学中,水深测量实习受场地、经费和安全因素影响大,难以开展的问题,设计并实现了模拟水深测量实习。该模拟实习能较为真实地模拟了水深测量的主要步骤,易于开展和推广。     

Flexible membranes anchored to the ground for slope stabilisation: Numerical modelling of soil slopes using SPH

An alternative modelling for flexible membranes anchored to the ground for soil slope stabilisation is presented using Smoothed-Particle Hydrodynamics to model the unstable ground mass in a soil slope, employing a dynamic solve engine. A regression model of pressure normal to the ground, q_sim, and also membrane deflection, f_sim, have been developed using Design of Experiment. Finally, a comparison between the pressure obtained from numerical simulation and from a limit equilibrium analysis considering infinite slope has been carried out, showing differences in the results, mainly due to the membrane stiffness.     

Characteristics of the Asian–Pacific Oscillation in Boreal Summer Simulated by BCC_CSM with Different Horizontal Resolutions

The summer Asian–Pacific Oscillation(APO) is a major teleconnection pattern that reflects the zonal thermal contrast between East Asia and the North Pacific in the upper troposphere. The performance of Beijing Climate Center Climate System Models(BCC CSMs) with different horizontal resolutions, i.e., BCC CSM1.1 and BCC CSM1.1(m), in reproducing APO interannual variability, APO-related precipitation anomalies, and associated atmospheric circulation anomalies, is evaluated.The results show that BCC CSM1.1(m) can successfully capture the interannual variability of the summer APO index. It is also more capable in reproducing the APO's spatial pattern, compared to BCC CSM1.1, due to its higher horizontal resolution. Associated with a positive APO index, the northward-shifted and intensified South Asian high, strengthened extratropical westerly jet, and tropical easterly jet in the upper troposphere, as well as the southwesterly monsoonal flow over North Africa and the Indian Ocean in the lower troposphere, are realistically represented by BCC CSM1.1(m), leading to an improvement in reproducing the increased precipitation over tropical North Africa, South Asia, and East Asia, as well as the decreased precipitation over subtropical North Africa, Japan, and North America. In contrast, these features are less consistent with observations when simulated by BCC CSM1.1. Regression analysis further indicates that surface temperature anomalies over the North Pacific and the southern and western flanks of the Tibetan Plateau are reasonably reproduced by BCC CSM1.1(m), which contributes to the substantial improvement in the simulation of the characteristics of summer APO compared to that of BCC CSM1.1.     

Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

基于五种油源的中重度风化溢油的常规鉴定指标的应用效果评估

本文利用采集于我国三大油田的五种原油样品开展了长达210天的溢油风化模拟实验,并依据相对偏差和重复性限数学分析法,进行溢油风化过程分析和诊断比值应用效果评估。研究结果表明:经过210天的风化,溢油鉴定诊断比值发生明显改变;其中来源于萜烷、甾烷和多环芳烃的诊断比值变化率要远低于正构烷烃,可用于中长期风化溢油鉴定。此外,研究发现,在这些有效诊断比值中有4个变化率较小,相对偏差低于5%,保持了较好的稳定性,更适合于重度风化溢油鉴定。     

Diagnosis of earth-fill dams by synthesised approach of sounding and surface wave method

The spatial distribution of the strength inside the earth-fill is identified by the sounding tests. In this research, the Swedish weight sounding (SWS) is employed, and the spatial high-density test is performed to identify the spatial correlation structure. Furthermore, the synthesised approach of the SWS and surface wave method, which is one of the geophysical method, is proposed to compensate the shortage of each approach. Consequently, the correlation structure of an earth-fill could be identified accurately, and the high resolution of the spatial distribution could be visualised based on the survey results.