Semi-Probabilistic Evaluation of System Redundancy for Existing Offshore Structures

In this paper, a new definition of structure system redundancy is proposed in view of the various measures for structure redundancy. By introducing the terms of structure system failure at the mechanism level and equivalent reliability index, the safety for existing offshore platforms can be evaluated by the semi-probabilistic method presented in this paper. Some numerical examples are given and satisfactory results have been obtained.     

疏浚物倾倒区海水水质级别的模糊综合评价

应用模糊综合评价方法对大连臭水套海域疏浚物预选倾倒区的水质状况进行了评价，得到了有益的结论。     

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。     

自由投放式声学多普勒海流剖面观测及数据处理

自由投放式声学多普勒海流剖面（FADCP）观测以“自由落体”方式进行采样,其不依赖于测船钢缆牵引即可对全深度海流进行观测,观测稳定性较下放式声学多普勒海流剖面（LADCP）大幅提升,有效减少了观测值之中的不规则运动。2021年4月与9月在南海西沙海域开展的FADCP观测实验获得了两个断面包含16个站的海流及CTD资料。基于静置期间的真实底流观测,各站全深度的海流剖面采用剪切法获得,潜标附近站位剖面与潜标观测剖面相比,平均流速偏差为3 cm/s。观测断面捕捉到了西沙海域两个时期的气旋涡,其垂直结构比HYCOM模拟更精细,表层流与绝对地转流契合。研究表明,FADCP对测船要求低、数据质量高,其后处理简便且结果良好,但无法对特定水层实施补充观测。     

远区台风“三巴”对长江口波浪动力场的作用机制

针对远区台风对河口波浪动力场的影响问题,利用第三代波浪模式SWAN计算了远区台风"三巴"期间长江口波浪动力场分布,分析了陆架至河口区的波浪能量耗散和波致泥沙侵蚀的时空分布,发现波浪由外海向近岸传播过程中,波-波相互作用导致能量由高频向低频转换,周期和波长逐渐增大,近底层轨道流速增大,能量密度增高;阐明白帽破碎是维持深水区波浪能量平衡和限制波高成长的主要机制,底摩擦耗能和水深诱导的破碎耗能是长江口横沙东滩和崇明东滩邻近海域波高衰减的主要原因;提出波浪产生的底部切应力与相对水深有关,当波浪传播到浅水区时,波长和周期越大,波浪切应力越大。研究揭示了与河口相距数百公里的远区台风能够对长江口波浪动力场产生明显影响,河口水下三角洲前缘是最容易受到波浪侵蚀的区域,研究成果弥补了目前关于陆架远区台风对河口波浪动力场影响研究的不足,对深化认识远区台风对长江口动力环境、地貌演变、航运安全和滩涂保护等有重要科学意义。     

中国海岛型旅游目的地生态安全综合评价与障碍因素研究

从可持续发展的视角,基于驱动力-压力-状态-影响-响应的DPSIR模型构建了海岛型旅游目的地生态安全评价体系,选取中国12个县级地域单元的海岛作为研究区,通过TOPSIS模型对其2018年的生态安全水平进行测度,并根据其贴近度指数划分为不安全、较不安全、比较安全、安全4个等级,引用障碍度模型对影响海岛型旅游目的地生态安全的障碍因素进行诊断分析。结果表明:(1)洞头区、崇明区、定海区的生态安全等级为不安全;平潭县、嵊泗县、普陀区、玉环市和南澳县为较不安全;长岛县和岱山县为较安全;长海县和东山县为安全状态,研究区内海岛型旅游目的地的生态安全面临着较大威胁。(2)压力系统中海岛脆弱性和响应系统中生态保护力度是生态安全水平提升的主要障碍因素,而自然灾害对海岛的损害、环保资金支持力度不足以及有限的海岛空间承载量又是其中最关键的因素。基于障碍因素的诊断,提出了生态安全水平提升的策略,为保障我国海岛的生态安全提供实证参考。     

Effect of nano-MgO on mechanical performance of cement stabilized silty clay

Abstract

A series of direct shear tests were performed on cement-admixed silty clay to investigate the effect of cement content and nano-magnesia (MgO) on its shear strength properties. For each normal stress, shear strength increased with cement content. However, an obvious increment in shear strength was achieved when the cement content was adjusted from 13% to 17%. Both cohesion and friction angle of cemented soil increased with cement content, and exponential function was adopted to correlate both the factors with cement content. For cement content of 10% investigated in this study, the optimum nano-MgO content was 10‰, wherein the cohesion could reach the peak value. The microstructure of the mixture revealed that the structure of the mixture was compacted for the optimum nano-MgO content. However, micro-cracks were formed when the amount of nano-MgO exceeded its optimum content.     

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Abstract

This study developed prestressed high-strength concrete (PHC) piles reinforced with high-strength materials (glass fiber-reinforced polymer (GFRP) bars) for flexural performance enhancement. Flexural strengths and behaviors of PHC piles reinforced with hybrid GFRP and steel bars were experimentally investigated, respectively. Large-scale specimens with total lengths of 12,000?mm and diameters of 600?mm were constructed and tested under bending, accompanied by evaluation of effects of non-prestressed reinforcement type and longitudinal reinforcement ratio. J-factors were calculated to evaluate deformability of all the specimens. PHC piles reinforced with GFRP bars were demonstrated to have much higher flexural capacity than those reinforced with steel bars. Moreover, strains at the midspans of cross sections of all the specimens basically conformed to the assumption of plane section. Failure of PHC piles reinforced with GFRP bars was attributable to gradual concrete crushing, while that of PHC piles reinforced with steel bars resulted from steel yielding. Results of this study were expected to provide theoretical basis for wide engineering applications of PHC piles reinforced with hybrid GFRP bars and steel bars in marine structures.     

Gradation affects basic mechanical characteristics of Chinese calcareous sand as airport subgrade of reefs

Abstract

Construction of the reefs in the South China Sea is a significant foundation to the secure stability and economic development of China. The construction of an airport runway is necessary for this realization. The calcareous sand is the main primary material in the runway construction. A certain type of calcareous sand near a certain reef of the South China Sea was studied in this paper. To investigate this specific calcareous sand, quartz sand was used as a reference for comparison. Microscopic 3-D imaging, compression and triaxial tests were conducted to test the micro, squeezing and shear properties. The effect mechanism of gradation on the calcareous sand’s compressibility and shear characteristics are discussed from a mesoscopic viewpoint using 3-D morphology. Calcareous sand particles are multiangular and flatter in comparison with quartz sand. The larger the particle sizes are, the more different the two sands’ morphologies are. The compressibility of calcareous sand is greater, and the effect of the coarse fraction (5–1?mm) content in the gradation plays the most significant role in this feature. When the coarse particles’ content is less than 25% and the mass ratio of the middle and fine particles (M) is constant, there is the worst coarse fraction content causing the calcareous sand to be most likely compressed. The worst coarse fraction content decreases with the increase in M, and an empirical formula is proposed. When the gradation, relative density and confining pressure are the same, the peak shear stress and strain of calcareous sand are all at a high level. The effect of confining pressure is manifested in calcareous sand. The shear strength and dilation of calcareous sand are also most affected by the medium coarse fraction (5–0.25?mm) content.     

Dynamic characteristics of marine soft clay under variable phase difference and initial static shear stress

Abstract

Under seismic loading, the soil layer is subjected to multidirectional cyclic shear stress with different amplitudes and frequencies because of the coupling of multiple shear waves and the soil element within a slope or behind a retaining wall is subjected to initial static shear stress before subjected to cyclic loading. Due to the complexity of seismic loading propagation, a phase difference exists between the initial static shear stress and cyclic shear stress. To investigate the influence of the phase difference and initial static shear stress on cyclic shear strain, cyclic modulus, and cyclic strength, a series of laboratory tests are performed on Wenzhou marine soft clay by multi-directional simple shear system, which can simulate the actual state better by controlling the horizontal cyclic stress in the x and y directions simultaneously. As the phase difference varies from 0° to 90°, the dynamic shear modulus increases and cyclic strain accumulation decreases with an increasing number of cycles. The shear strain increases with the initial shear stress.