Numerical simulation of a stratigraphic model

A multi-lithology diffusive stratigraphic model is considered, which simulates at large scales in space and time the infill of sedimentary basins governed by the interaction between tectonics displacements, eustatic variations, sediment supply, and sediment transport laws. The model accounts for the mass conservation of each sediment lithology resulting in a mixed parabolic, hyperbolic system of partial differential equations (PDEs) for the lithology concentrations and the sediment thickness. It also takes into account a limit on the rock alteration velocity modeled as a unilaterality constraint. To obtain a robust, fast, and accurate simulation, fully and semi-implicit finite volume discre tization schemes are derived for which the existence of stable solutions is proved. Then, the set of nonlinear equations is solved using a Newton algorithm adapted to the unilaterality constraint, and preconditioning strategies are defined for the solution of the linear system at each Newton iteration. They are based on an algebraic approximate decoupling of the sediment thickness and the concentration variables as well as on a proper preconditioning of each variable. These algorithms are studied and compared in terms of robustness, scalability, and efficiency on two real basin test cases.     

Use of unit response functions for management of regional multilayered aquifers: application to the North Aquitaine Tertiary system (France)

Although there are many numerical applications used in aquifer management, few methodologies seem to be sufficiently adapted to provide solutions for regional-scale problems. Their applications for multilayered aquifers are also too limited. A new groundwater management tool adapted to such large physical systems has been developed, using the unit response function (URF) approach. This tool is based on the link between a numerical groundwater flow model and a mathematical optimisation tool. Pre- and post processing are based on a geographical information system (GIS). The developed tool has been applied to a real management case—the regional Aquitaine multilayered aquifer (France). A representative hydrodynamic model was built using MODFLOW 2000 code. First tests show that the linearity condition needed for the application of URF methodology is respected despite the high complexity of the system. Two management scenarios were tested. Optimal solutions thus obtained allow for viable exploitation alternatives to be proposed, which integrate complex environmental constraints.

---

Résumé Malgré un nombre important d’applications existant dans le domaine de la gestion des aquifères, peu de méthodologies semblent adaptées pour proposer des solutions à des problèmes réels de dimension régionale. Leurs application pour des systèmes multicouches sont souvent trop limitées. Un outil de gestion adapté à ces systèmes de large taille a été développé, basé sur la théorie des Fonctions de Réponses Unitaires (FRU). Cet outil est basé sur le couplage d’un modèle numérique d’écoulement et d’un code d’optimisation mathématique. Les entrées et sorties du modèle sont réalisées à l’aide d’un Système d’Information Géographique (SIG). L’outil développé est appliqué à un cas de gestion réel—le système aquifère régional multicouche aquitain (France). Un modèle hydrodynamique représentatif a été construit, basé sur le code MODFLOW 2000. Les premiers tests montrent que les conditions de linéarité nécessaires à l’application de la méthode FRU sont respectées, malgré l’importante complexité du système. Deux scénarii de gestion sont testés. Les solutions optimales ainsi obtenues permettent de proposer des solutions d’exploitation alternatives viables, intégrant des contraintes environnementales complexes.

---

Resumen Aunque hay muchas aplicaciones numéricas usadas en la gestión de acuíferos, unas pocas metodologías parecen estar adaptadas suficientemente para dar las soluciones a los problemas de escala regional. También son limitadas sus aplicaciones para los acuíferos multicapa. Se ha desarrollado una nueva herramienta para el manejo del agua subterránea, adaptada a tales sistemas físicos grandes, usando el avance de la Función de Respuesta Unitaria (URF). Esta herramienta se basa en la combinación entre un modelo numérico de flujo de agua subterránea y una herramienta de optimización matemática. El pre-proceso y el post-proceso se basan en un Sistema de Información Geográfico (GIS). La herramienta desarrollada se ha aplicado a un caso real de manejo en el acuífero regional multicapa de Aquitania (Francia). Se construyó un modelo hidrodinámico representativo, que usó el código MODFLOW 2000. Las primeras pruebas muestran que la condición de linearidad, necesaria para la aplicación de la metodología URF, se respeta a pesar de la complejidad alta del sistema. Se probaron dos escenarios de manejo. Las soluciones óptimas así obtenidas permiten la proyección de alternativas viables de explotación, las cuales integran restricciones medioambientales complejas.

     

Evaluation of distributed recharge in an upland semi-arid karst system: the West Bank Mountain Aquifer,Middle East

Assessment of recharge in a structurally complex upland karst limestone aquifer situated in a semi-arid environment is difficult. Resort to surrogate indicators such as measurement of spring outflow and borehole discharge, is a common alternative, and attempts to apply conventional soil moisture deficit analysis may not adequately account for the intermittent spate conditions that arise in such environments. A modelling approach has been made using the West Bank Mountain Aquifer system in the Middle East as a trial. The model uses object oriented software which allows various objects to be switched on and off. Each of the main recharge processes identified in the West Bank is incorporated. The model allows either conventional soil moisture deficit analysis calculations or wetting threshold calculations to be made as appropriate, and accommodates both direct recharge and secondary recharge. Daily time steps enable recharge and runoff routing to be calculated for each node. Model runs have enabled a series of simulations for each of the three aquifer basins in the West Bank and for the whole of the West Bank. These provide recharge estimates comparable to those prepared by earlier workers by conventional means. The model is adaptable and has been successfully used in other environments.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

Pumping decisions for sustainable development of groundwater resources in areas of grassland degradation: a case study in Lanqi Banner, Inner Mongolia, China

The best planting alternatives for satisfying high water use demands of forage and fodder crops in a region of Inner Mongolia, China, were determined by a multiobjective distributed-parameter groundwater management model. These alternatives took account of different cropping patterns and pumping decisions associated with both temporal and spatial aspects of water allocation. The model was developed for phreatic, homogenous, and isotropic aquifers using the response matrix technique of quadratic programming theory and, in this case, using the alternative direction implicit (ADI) scheme. Model solutions using effective rainfall with a probability of 50%, show that average water table drawdown in the planning period (2006–2017) is 0.22 m and the groundwater fluctuation in each pumping well is very low. In order to evaluate the pumping decisions under an effective rainfall with a probability of 75%, a sensitive analysis was also conducted. Analysis shows that it is useful to apply the results from the proposed model to control the landscape degradation due to overgrazing and overpumping activities.     

Groundwater flow modeling for effective implementation of landslide stability enhancement measures

This paper deals with groundwater hydrology at a prominent fracture zone landslide slope (Nuta–Yone landslides) in Japan with an objective to explore an efficient method for the application of landslide stability enhancement measures. The correlation analyses between the hydrological parameters and ground surface movement data at this landslide resulted in low correlation values indicating that the geological formation of the area is extremely complex. For the purpose of understanding the groundwater flow behavior in the landslide area, a three-dimensional transient groundwater flow model was prepared for a part of the landslide slope, where the levels of effectiveness of applied landslide stability enhancement measures (in the form of multilayered deep horizontal drains) are different, and was calibrated against the measured water surface elevations at different piezometer locations. The parameter distributions in the calibrated model and the general directions of the groundwater flow in terms of flow vectors and the results of particle tracking at the model site were interpreted to understand the reasons for variations in effectiveness of existing landslide stability enhancement measures and to find potentially better locations for the implementation of future landslide stability enhancement measures. From the modeling results, it was also understood that groundwater flow model can be effectively used in better planning and locating the landslide stability enhancement measures.     

中国数字地质调查系统的基本构架 及其核心技术的实现

数字地质调查系统是贯穿整个地质矿产资源调查全过程的软件,涵盖地质矿产调查、矿产资源勘查、矿体模拟、品住估计、资源量估算、矿山开采系统优化等内容。考虑数字地质调查系统的应用技术层面,从数据“层”模型、数据流“池”技术、不同阶段数据模型继承技术、数据互操作技术等几个方面讨论了核心技术及其实现,通过基于无缝一体化技术的数据采集、管理、综合处理与成果表达,在实体或矿块的矿床建模技术与品住估计、储量估算等方面展现了全地质调查过程的数字化,不但为地质人员应用高新技术降低了门坎,而且极大地提高了研究精度和效率,丰富了成果的表现形式和服务形式。随着数字地质调查系统的完善和应用水平的提高,数字地质调查系统将成为中国地质调查的主流软件体系。     

靖远矿区采煤沉陷区复垦综合评价方法研究

以靖远矿区为例,从土地复垦和恢复生态学的角度出发,建立了靖远矿区采煤沉陷区复垦综合评价系统,选择土壤条件（土层厚度、土壤质地、有机质含量、土壤水分）、地形改造条件（地面坡度、地表破坏程度、改造难易程度）、气候及水文条件（年降雨量、灌溉条件）作为分类及评价因子对复垦潜力进行评价。将采煤沉陷地分为四种潜力区,对每种潜力类型区的复垦开发利用方向进行了优化设计,从理论上和实践上对靖远矿区采煤沉陷地的复垦能力以及复垦过程中用地结构的优化作了探讨,以期对当地沉陷地的复垦提供一定的科学依据。     

Oil and gas resource assessment: The linkage between geological analysis and discovery process model results

Two widely-used techniques to estimate the volume of remaining oil and gas resources are discovery process modeling and geologic assessment. Both were used in a recent national assessment of oil and gas resources of the United States. Parallel estimates were obtained for 27 provinces. Geological-based estimates can typically see into areas not available to discovery process models (that is areas with little or no exploration history) and thus, on average, yield higher estimates. However, a linear relation does exist between the mean estimates obtained from these two methods. In addition, other variables were found in a multiple regression model that explained much of the difference. Thus, it is possible to perform discovery process modeling and adjust the estimates to yield results that might be expected from geological-based assessments.     

地震综合效应场函数及其在地震预报中的应用──（一）地震综合效应场函数及其计算方法

在系统地分析了目前各种测震学地震预报方法科学思路的基础上,认为测震学地震预报方法基本上可以分为两大类。一类是以已经发生的一些地震作为未来可能发生的地震的“因”,即由于已经发生的地震对区域应力场的影响,导致未来发生较强地震。这一类包括的预报方法较多,如空区、条带、ｂ值、地震迁移、相关地震等等及其由此衍生出来的各种方法。另一类是把已经发生的一些地震作为区域应力场增强的“果”,即已经发生的地震是区域应力场增强过程中的一种反映,而未来地震不一定是已经发生的地震所导致的结果。这一类包括“地震窗口”、小震群活动等方法。针对第一类方法,各种预报方法都是力图从地震三要素中提取未来地震的信息,而具体作法又都是利用地震三要素这个多维空间的某个剖面。为了从地震活动诸要素的多维空间提取综合信息,我们对每个地震加入了破裂面方位,构成了地震第四要素,并依据地震４要素建立了地震综合效应场函数。地震综合效应场函数概括了多种测震学地震预报方法的科学思路和预报经验,从而可以形成测震学的综合预报方法。