竖波钢板组合剪力墙震损修复研究

钢板组合剪力墙在强震作用下受损严重,震损修复问题较为突出。现设计一片以方钢管作为边缘约束构件的竖波钢板组合剪力墙,在最大弹塑性层间位移角时的震损情况进行分析:竖波钢板组合剪力墙边缘约束方钢管刚度较大,与墙体不匹配,最终发生方钢管从地梁拔动的脆性破坏模式。对竖波钢板组合剪力墙进行震损修复,得到墙趾可更换竖波钢板组合剪力墙,然后进行拟静力试验。试验结果表明:（1）在震损后的竖波钢板组合剪力墙的墙趾处安装阻尼器,其抗震性能基本得到恢复。（2）修复后的竖波钢板组合剪力墙承载力较修复前降低了23%,但延性和耗能能力显著提升。（3）改变了竖波钢板组合剪力墙的破坏模式,由脆性破坏转化为延性破坏。借助有限元软件详细讨论了内嵌竖向波形钢板厚度和波角、轴压比、阻尼器腹板数量对修复后竖波钢板组合剪力墙抗剪承载力的影响,结果表明:改变内嵌竖向波形钢板厚度对试件抗剪承载力影响较大,而改变内嵌竖向波形钢板波角、轴压比和阻尼器腹板数量对试件抗剪承载力影响较小。结合有限元算例,提出修复后竖波钢板组合剪力墙抗剪承载力的计算公式,可为工程实际提供参考。     

联合剖面法在地下热水勘探中的应用

联合剖面法是勘查地下热水中一种比较简便的方法,近年来得到了广泛应用。应用此法并结合区域地质和构造特征,了解地热田地质结构、热储、盖层、热储类型等。根据联合剖面装置获得的低阻正交点,推断出断裂构造的位置,为确定井位及温泉开发利用提供重要依据。     

Evaluation of the relative roles of global versus local sedimentary controls on Middle to Late Pleistocene formation of continental margin strata,Canterbury Basin,New Zealand

Determining the relative influence of eustasy versus local sedimentary processes on strata formation is a fundamental challenge in the study of continental margin stratigraphy. In this paper, the relative contribution of these factors on continental margin evolution during the Middle to Late Pleistocene is evaluated using samples from Integrated Ocean Drilling Program Expedition 317. Core‐logging, biostratigraphy and quantitative X‐ray diffraction mineralogy are used to delineate continental shelf sedimentary systems. Major lithological unconformities bound stratigraphic sequences that contain recurring compositional patterns and that resemble other examples of Middle to Upper Pleistocene sequences. However, a preliminary chronology suggests that sequence boundary formation cannot be linked ‘one to one’ with eustatic cycles and therefore these sequences can contain multiple ca 100 ka eustatic cycles. Smaller amplitude, higher frequency transitions in sediment composition are interpreted as stratigraphic sequences driven by more rapid perturbations in the interplay of accommodation and sediment supply; their stratigraphy is variable in time and across the shelf, suggesting a strong influence of local sedimentary forcing in their formation. Changes in sediment composition after the Middle Pleistocene Transition indicate that sediment transfer from onshore sources in the glaciated Southern Alps to the middle‐shelf occurred over a single 100 ka glacio‐eustatic cycle, with an additional 100 ka lag before the mineralogical signal was preserved on the outer‐shelf. This phenomenon is coincident with rapid shelf progradation in this basin, suggesting a causal relation between across‐shelf sediment transport and margin progradation. This is one of very few studies that provide insights at the core scale into the processes driving continental margin evolution during the Middle to Late Pleistocene. This work shows that compositional changes in mud‐dominated successions can lead to a sequence stratigraphic interpretation and the identification of high‐frequency sequences, which may not be possible using a conventional stratigraphic approach.     

The Reliability of Assigned Values from the GeoPT Proficiency Testing Programme from an Evaluation of Data for Six Test Materials that have been Characterised as Certified Reference Materials

Assigned values derived from the GeoPT proficiency testing programme were compared with certified values for six certified reference materials that have been used as test materials in the GeoPT programme. Statistical analysis showed that there were few significant differences between these sets of data and that these differences had no significant impact on the GeoPT assessment when fitness‐for‐purpose criteria were taken into account.     

冀中坳陷下第三系构造背斜成因分类

冀中坳陷的下第三系构造背斜主要形成于伸展断陷背景下 ,与正断层系统联系紧密。根据背斜与断层关系 ,基本类型可分为 3种 ,即纵向、横向和复合背斜 ;根据具体构造力学背景 ,这 3种背斜可进一步分为 8类 ,即 :重力滑动型、张扭型、拆离拱张型、逆牵引型、断层线偏转型、侧接型、复杂变换型、复合型。这些背斜是构造演化的产物 ,在一定程度上指示了坳陷内的构造演化规律 ,同时又是形成油气藏的有利圈闭 ,目前已取得显著勘探成效     

毫秒脉冲星定时研究进展

毫秒脉冲星守时的理论和方法研究己取得重要进展,利用现有2颗毫秒脉冲星约10yr的计时观测资料分析得到的 TAI-PT,其长期稳定度为 2×10－14。采用合适的长期稳定度算法,由多颗毫秒脉冲星计时观测可以建立综合脉冲星时间尺度。它可以成为与原子时系统比较的重要手段,并对原子时长期稳定度的改进做出贡献。介绍了该领域研究的基本状况,重点对毫秒脉冲星守时的理论方法,综合脉冲星时间及与原子时的关系等进行了讨论和评述。对由双星系统内毫秒脉冲星的轨道运动定义的双星脉冲星时也做了介绍。     

A Time-Transformed Leapfrog Scheme

We present a time-transformed leapfrog scheme combined with the extrapolation method to construct an integrator for orbits in N-body systems with large mass ratios. The basic idea can be used to transform any second-order differential equation into a form which may allow more efficient numerical integration. When applied to gravitating few-body systems this formulation permits extremely close two-body encounters to be considered without significant loss of accuracy. The new scheme has been implemented in a direct N-body code for simulations of super-massive binaries in galactic nuclei. In this context relativistic effects may also be included.     

USE OF VALUE FUNCTIONS AS A POSSIBLE SUITABILITY SCALING PROCEDURE IN AUTOMATED COMPOSITE MAPPING

The application of composite suitability mapping integrated with a geographic information system is progressing at a much faster rate than the methodological improvements necessary for optimal use in the public planning context. The use of value functions is suggested as an alternative scaling procedure that is scientifically and operationally preferable to existing procedures. Value functions limit the operational subjectivity and enhance the potential for replication and verification of the analysis. Value functions are conducive to increased automation of the land planning and decision process while being comprehensible to non-expert decision-makers and the public.     

Composite spectra

HD 201270/1 is a composite-spectrum binary whose components have spectral types close to G8 III and A2 V. They are in a circular orbit with a period of only 40 days. Photometric variability of RS CVn character is therefore not unlikely     

Mineralogy, petrology and P–T–t path of Ca–Na amphibole assemblages, Saint-Martin des Noyers formation, Vendée, France

Abstract The Saint-Martin des Noyers Formation is interpreted as a slice of an island-arc system of Lower to Middle Palaeozoic age, located in the internal part of the Variscan orogen in Vendée (Armorican Massif, France). Metamorphosed igneous rocks range in composition from ultramafic to rhyolitic. The regular increase in the FeO/(FeO+MgO) ratio, from mafic to silicic samples, results in a systematic variability in the nature and composition of the metamorphic phases. In basaltic samples, the occurrence of relict garnet-barroisite assemblages suggests relatively high-pressure conditions for the peak of metamorphism. During a subsequent retrograde evolution, the primary barroisitic hornblendes recrystallized to texturally complex mixtures of actinolite and hornblende. Despite this complication, it is possible to decipher a P–T-t path based on amphibole chemistry. The P–T trajectory deduced is dominated by the effect of pressure and consistent with early underthrusting and subsequent tectonic uplift of the ancient arc of Saint-Martin des Noyers.