复合土钉墙支护技术在某大型软土基坑围护中的应用

根据拟建建筑基坑的工程地质条件、周边环境条件、基坑开挖深度等特点综合考虑，对基坑分段采用超前微型桩支护加土钉墙、放坡加土钉墙2种复合支护方案。实践证明，该工程所采用的多种复合式支护实施方案，技术安全可靠，经济合理。     

Discrete numerical modelling of rockfill dams

The aim of this study is to obtain quantitative information on the behaviour of rockfill used in embankment dams, and particularly on the influence of block breakage on the displacement field, from a numerical analysis using the Distinct element method. A methodology is set up to define the resistance of the 2D particles so that the same probability of breaking blocks may be reproduced as in a 3D material. The model uses the discrete element code PFC^2D (Itasca Consulting Group Inc., PFC2D (Particle Flow Code in Two Dimensions), Version 3.0, 2002) and considers breakable clusters of 2D balls. The different parameters are determined from experimental data obtained from laboratory tests performed on rock blocks. The model is validated by comparing the results of the simulation of shearing tests with actual triaxial tests on rockfill material published in the literature. The numerical analysis of block crushing in an actual dam is proposed in the last part of this paper. Copyright © 2006 John Wiley & Sons, Ltd.     

Naturally acidic and metalliferous waters at unmined volcanogenic massive sulfide deposits in the Bonnifield mining district, Alaska Range, east-central Alaska

The Bonnifield district hosts 26 tmmined volcanogenic massive sulfide （VMS） occurrences. Environmental geochemical samples of water and stream sediment were collected at several occurrences, concentrating on the two best-exposed and largest deposits, Red Mountain （RM） and Sheep Creek （SC）. Limited samples were also collected at the poorly exposed WTF deposit. The deposits are Late Devonian to Early Mississippian, and are hosted by felsic metavolcanic and carbonaceous schist members of the Totatlanika Schist or Keevy Peak Fm. Spring and stream waters at RM and SC have pH values commonly 〈3.5 （as low as 2.4 at RM and 2.5 at SC）, high conductivity （up to 11000 μS/cm）, and very high （Is to 100s mg/L） dissolved contents of Al, Cd, Co, Cu, Fe, Ni, and Pb. Waters at RM are characterized by extremely high REE contents （summed REE median 3200 μg/L, n=33）. At both RM and SC, pyrite oxidation and dissolution produce low pH waters that interact with and dissolve bedrock minerals, resulting in acidic, metal-laden, naturally degraded streams that are mostly devoid of aquatic life. Ferricrete is common. In contrast, WTF barely produces a surficial environmental footprint, mostly due to topography and relief. RM and SC are well exposed in the areas of relatively high relief, and both exhibit extensive areas of quartz-sericite-pyrite-alteration. While WTF shares many of the same deposit-and alteration characteristics, it is concealed by tundra in a large, nearly flat area. Surface water at WTF is absent and outcrops are sparse. Even though WTF is roughly the same size as Red Mountain （both around 3 million tonnes） and has similar base- and precious-metal grades, the surficial geochemical manifestation of WTF is minimal. However, exposure through mining of the altered, mineralized rock at WTF potentially could initiate the same processes of pyrite oxidation, acid generation, and mineral dissolution that are observed naturally at RM and SC.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.     

GIS-based flood hazard mapping at different administrative scales: A case study in Gangetic West Bengal, India

This paper addresses the need for an efficient and cost-effective methodology for preparing flood hazard maps in data poor countries, particularly those under a monsoon regime where floods pose a recurrent danger. Taking Gangetic West Bengal, India, as an example and using available historical data from government agencies, the study compiled a regional map indicating hazard prone subregional areas for further detailed investigation, thereby isolating actual high risk localities. Using a GIS (Geographical Information System), a composite hazard index was devised incorporating variables of flood frequency, population density, transportation networks, access to potable water, and availability of high ground and maximum risk zones were mapped accordingly. A digital elevation model derived from high resolution imagery available in the public domain was used to calculate elevated areas suitable for temporary shelter during a flood. Selecting administrative units of analysis at the lowest possible scales – rural development blocks (regional) and revenue villages (subregional) – also ensures that hazard mapping is prepared in line with the existing rural planning and administrative authorities responsible for remedial intervention.     

Dissolved trace elements in river water: spatial distribution and the influencing factor, a study for the Pearl River Delta Economic Zone, China

Twenty-nine water samples were collected from different river channels of the Pearl River Delta Economic Zone, China. An inductively coupled plasma-mass spectromonitor (ICP-MS) was used to measure concentrations of the trace elements in these samples. The results suggest that the average concentrations of rare earth elements in river water show an increasing trend from the West River, the North River, the rivers of the Pearl River Delta, and the Shenzhen River to the East River. Relatively high concentrations of heavy metals appear in the East River, the rivers of the Pearl River Delta and the Shenzhen River, while the West River and the North River have relatively low heavy metal concentrations. Trace element concentrations in samples collected near urban or industrial areas are much higher than those of samples collected from distant areas, away from urban and industrial areas. After natural conditions, human activities have significant influence on the trace element concentrations in river water. This trace element concentration’s spatial distribution in the river water from the Pearl River Delta Economic Zone is actually an integrated effect of natural conditions and human activity.     

要十分重视另一类型地质灾害的防治

文章提出另一类型地质灾害,即化学型地质灾害的定义及其分类。并认为化学型地质灾害不像物理型地质灾害那样发生瞬时灾害,而有一个延缓过程,但是一旦发生,难于挽救。化学型地质灾害体的主体是化学元素,开展地球化学调查,研究化学元素的赋存规律、土壤及沉积物承受各类元素的极限、各类元素活化的条件是揭示诱发化学型地质灾害机理的关键。因此要十分重视与加强化学型地质灾害的调查、研究、监测与治理工作。