Chemical forms of heavy metal contaminants in sediments of Miyun reservoir

The chemical forms, spatial distribution and sources of As, Hg, Cd, Pb and Zn in sediments of the Miyun reservoir were studied. The results of sequential extraction demonstrate that most of As, Pb and Zn were bound to the residual fraction, Hg was associated with the sulfide fraction while Cd was associated with the carbonate fraction and the residual fraction. On the vertical profiles the concentrations of the heavy metals in total and each fractions mostly decreased with increasing depths in sediments, suggesting that the heavy metals input from the upstream watershed increases yearly. Summation of the residual fraction, the sulfide fraction and the carbonate fraction accounts for 60.03%―85.60% of the total heavy metal contents in the sediments, which represent the geochemical background values of the elements and relate closely to soil erosion. Results of the main factor analysis show that most sediments of the reservoir come from the upstream soil erosion, the point source pollution and domestic waste. Moreover, the microbial activities taking place on the sediment-water interface are also one of the major factors to cause the increasing content of the organic matter fraction and the iron-manganese oxide fraction. Environmental change of the reservoir water could make the removability of the heavy metals increase, leading to the increase of their concentrations in pore water in sediments, and imperiling water quality of the reservoir.     

The role of the seismic trigger in the Calitri landslide (Italy): historical reconstruction and dynamic analysis

The study covered by this paper was focused on the historical case of the Calitri landslide, which was repeatedly reactivated by earthquakes, as reported since 1694. The town of Calitri (Southern Italy) is located on a ridge whose southern slope, from its top to the Ofanto river valley floor, has been historically affected by major landsliding. The last record of recurrence of the Calitri landslide leads back to the 1980 Irpinia earthquake, which caused significant damage to the town and had pervasive and visible ground effects. Based on a detailed historical reconstruction of landsliding and seismicity at Calitri, the study analysed the current static and dynamic stability of the landsliding slope by means of a finite-difference numerical analysis, taking into account the various factors of landslide initiation and kinematics. The results of the numerical analysis: (i) were consistent with the roto-translational mechanism observed upon the latest reactivation of the landslide; (ii) demonstrated that excess pore pressure redistribution caused a lag between the seismic trigger and the initiation of landsliding; and (iii) showed the impact of seismic input frequency on propagation and depth of slope instability.     

Use of time series analysis for the identification of tidal effect on groundwater in the coastal area of Kimje, Korea

The purpose of this study is to apply time series analysis to investigate whether the groundwater quality in the coastal area is affected by the tide. Continuous and regular in situ monitoring data of electrical conductivity (EC) and groundwater level, and tidal level data measured by the National Oceanographic Research Institute were used for the time series analysis. Through the time series analysis, it is known that EC and groundwater level conspicuously fluctuate with two periodicities (15.4 and 0.52-day), which is very similar to those of the tide. Also the behaviors of their fluctuations vary in accordance with the tidal period. These indicate that the groundwater quality has been mainly controlled by the tidal level, and the strength of tidal effect on the groundwater quality is different according to the tidal period.     

Use of fallout 137Cs for documenting the chronology of overbank sediments from the river Sava, Croatia, and interpreting their geochemical patterns

This paper attempts to determine the impact of former Pb-Zn-Ba mining activities in Slovenian drainage basin on overbank sediments of the Sava river (West Croatia). Among the four studied sequences (S7, S8, S9, S10), the most upstream profile S7 showed the most pronounced impact of ore mining. Mercury was enriched more than 100-fold; Pb and Zn had a strong positive correlation (r > 0.99). Two factor models clearly revealed the Pb-Ba-Hg association in the lower-lying carbonate (CA) population of all four profiles, but only in the overlying silicate (SI) population of profile S7. Factor analysis confirmed this association in the total sediment (90 samples) as well as separately in the CA (33 samples) and SI (57 samples) populations. Based on a comparison with an undisturbed soil profile, the vertical distribution of ¹³⁷Cs in profile S7 was interpreted to be the combination of caesium deposition caused by a flood in 1964 and by post-depositional redistribution.     

Analysis on Bearing Capacity of Tunnel-Type Anchorage of a Long-Span Suspension Bridge

INTRODUCTION Tunnel typeanchoragehasobviousadvantages inbearingcapacityversusinvestment(LiuandHu,1996).However,itisrarelyusedinapracticalpro jectbecauseofitsrequirementofgoodrockcondi tions.Siduhebridge(Fig.1),whichliesintheBa dongmountainsinthewestplatea…     

基于高通量测序的表层水体纤毛虫多样性评估方法比较与优化

基于扩增子的高通量测序技术广泛应用于微型生物多样性的研究, 不同的测序手段和数据分析流程, 影响着微型生物多样性与群落结构的分析结果。本研究以易于形态鉴定的砂壳纤毛虫作为研究对象, 比较DNA测序、RNA测序和形态学方法检获的多样性和物种组成等, 探究序列分析流程中关键步骤: 嵌合体处理、可操作分类单元分析方法选择、合并相似分类单元以及去除稀有类群等对多样性结果的影响。研究结果显示无论基于DNA还是RNA的分子手段与形态学方法检获的主要物种基本一致, 与DNA测序相比, RNA测序检获的物种数少, 但差异不显著。基于97%以上相似度聚类和单核苷酸变异所得群落结构相似, 无显著差异; 且所有分析方法都能在一定程度上反映出自然界中不同类群的相对丰度。相较于单核苷酸变异和其他相似度阈值, 99%相似度下聚类所得多样性更为接近形态学结果。去除嵌合体和稀有类群(去除阈值: DNA测序0.05%; RNA测序0.07%), 可明显改善分子多样性虚高的问题。本研究为纤毛虫等真核微生物的分子多样性研究提供了科学的数据分析流程, 对未来真核微生物多样性研究具有指导意义。     

基于ArcObjects的土地利用时空分析系统研究

随着愈加快速的土地资源开发,土地利用时空变化研究已全面启动,本文结合ArcObjects组件、Access数据库和VC 工具开发了一个土地利用时空分析系统,实现了土地利用空间数据建库、地图查询分析、土地利用时空模型解算等功能。为土地利用时空研究提供功能集成的数据运算与图形处理平台,也为土地利用规划的制定及其修编等工作提供了技术支持。     

延庆地震台地电阻率改造影响的分析研究

对延庆地震台地电阻率的观测系统进行改造后的变化特征进行了初步研究,介绍了电极和外线路改造技术环节,并通过改造前后观测资料的对比分析对改造后的观测系统情况进行了评价。     

Effect of abutment modeling on the seismic response of bridge structures

Abutment behavior significantly influences the seismic response of certain bridge structures. Specifically in the case of short bridges with relatively stiff superstructures typical of highway overpasses, embankment mobilization and inelastic behavior of the soil material under high shear deformation levels dominate the response of the bridge and its column bents. This paper investigates the sensitivity of bridge seismic response with respect to three different abutment modeling approaches. The abutment modeling approaches are based on three increasing levels of complexity that attempt to capture the critical components and modes of abutment response without the need to generate continuum models of the embankment, approach, and abutment foundations. Six existing reinforced concrete bridge structures, typical of Ordinary Bridges in California, are selected for the analysis. Nonlinear models of the bridges are developed in OpenSees. Three abutment model types of increasing complexity are developed for each bridge, denoted as roller, simplified, and spring abutments. The roller model contains only single-point constraints. The spring model contains discrete representations of backfill, bearing pad, shear key, and back wall behavior. The simplified model is a compromise between the efficient roller model and the comprehensive spring model. Modal, pushover, and nonlinear dynamic time history analyses are conducted for the six bridges using the three abutment models for each bridge. Comparisons of the analysis results show major differences in mode shapes and periods, ultimate base shear strength, as well as peak displacements of the column top obtained due to dynamic excitation. The adequacy of the three abutment models used in the study to realistically represent all major resistance mechanisms and components of the abutments, including an accurate estimation of their mass, stiffness, and nonlinear hysteretic behavior, is evaluated. Recommendations for abutment modeling are made.