Seismotectonic environment of occurring the February 3, 1996 Lijiang M=7.0 earthquake, Yunnan Province

Introduction The surface rupture and aftershocks of the February 3, 1996 Lijiang earthquake are basically distributed along the N-S-trending Lijiang-Daju fault, which is boundary fault between Lijiang Quaternary, fault controlled basin and Yulong-Haba range (ZHANG, et al, 1997). Corresponding to the surface geological features, the focal rupture of the Lijiang earthquake also shows large component of dip-slip. It is of great difference from that of other earthquakes in west Yunnan, in w…     

Earthquake probabilities and magnitude distribution (M ≥ 6.7) along the Haiyuan fault, northwestern China

Introduction Haiyuan fault is a major seismogenic fault in north-central China. One of the most devastat-ing great earthquake in the 20th century occurred near Haiyuan in northwestern China on Decem-ber 16, 1920. More than 220 000 people were killed and thousands of towns and villages weredestroyed during the devastating earthquake. A 230 km long left-lateral surface rupture zone wasformed along the Haiyuan fault during the earthquake with maximum left-lateral displacement of10 m. Pale…     

雅江地块的震兆分析与强震危险性探讨

分析了雅江地块的构造环境、地震活动和震兆异常，探讨2001年雅江6．0级地震、2002年新龙5．3级地震发生后雅江地块的强震趋势。重点对理塘-德巫断裂带，新龙、白玉、德格及贡觉一带地区的异常地震活动图像进行分析，认为该区存在强震填空的潜在危险性。     

2001年四川雅江6.0级地震序列的破裂特征及发震构造

2001年雅江地震序列(主要地震是2月14日的Ms5．1和2月23日的Ms6．0地震)是四川地区近13年来的重要地震。选择2001年1月1日～6月30日期间，四川地震台网至少5个清晰的初动到时所记录的雅江地震序列中88次地震，并对其作了重新定位，对其中较大的13次地震用四川地区地震台网P波初动资料作了震源机制解。88次地震震源深度分布在2～16km，优势深度为9～llkm。前震、5．1级地震及其余震、6．0级地震及余震都紧邻孜河断裂分布，且按时段划分的震中优势分布方位与孜河断裂走向都是北西向。根据雅江地区近期大地形变场物质运移方向，选定了震源机制解的破裂面。13次较大地震震源机制解的主压应力P轴具有较大的垂向分量，水平投影方向为南东；地震类型都是左旋、走滑一正断型或正断一走滑型；大部分地震破裂面走向为北西一南东，倾向南西。根据前震、5．1级地震及其余震、6．0级地震及其余震震中优势分布方位，以及大多数较大地震破裂面走向和倾向，认为穿过震区的走向北西、倾向南西的孜河断裂是这次雅江地震序列的发震断裂。     

安徽淮河构造变形带及邻近块体现代构造应力场特征

针对安徽省较特殊的构造环境及历史地震分布特点，利用直达波最大振幅比和系统聚类分析方法，在对安徽淮河中游区1974年以来近百个中小地震震源机制反演、聚类及空间合成的基础上，分析了华北断块南缘的安徽淮河构造变形带及邻近块体震源断层滑动方式、构造应力场分布及块体运动方式、应力场随时间变化等。结果显示：淮河构造变形带及其邻近块体上震源断层总体上以近走滑型或斜滑型破裂为主，但倾滑型破裂也占一定比例；该地区构造应力以水平作用为主，但也存在一定的垂向作用。其中淮北和皖中块体仍可能分别向SWW和NEE方向运动，并在淮河构造变形带上产生左旋剪切作用，呈现一定的继承性活动特征；各块(带)上主压应力P轴走向随时间的变化在总体上较为一致，而各时段之间P轴方位存在一定差异，显示安徽淮河中游区受华北和华南应力场的共同作用，但其地震活动可能主要受控于华北应力场。     

CHARACTERIZATION OF DEFORMATION AND X-RAY PETROFABRICS IN THE MIDDLE PART OF THE WAHONGSHAN FAULT ZONE, QINGHAI PROVINCE, NORTHWESTERN CHINA

The Wahongshan fault zone in Qinghai province is one of the most important faults in westem China. In this paper, deformation and X-ray petrofabrics have been studied in the middle segment of the fault. The results show that the formation of the fault zones can be divided into two major stages: ductile shear deformation stage and brittle deformation stage. The early stage ductile shearing leads to the formation of the NW-NNW trending mylonite zones along the fault, which is intensely cut by the late-formed brittle faults. X-ray petrofabrics of rocks near the faults indicate that the minerals in the tectonites show a great degree of orientation in the alignment. The quartz, which is a very important mineral in the tectonites, is deformed by basal face gliding or near basal face gliding, and sometimes by prismatic face sliding, which indicates that the rocks are deformed in epithermal to mesothermal or mesothermal environment, and the dynamic recrystallization also plays an important role in the formation     

马家沟矿断层赋存规律及其对生产的指导作用

笔 者 结合 工 作 实 践 ,概 述 了 马 家 沟 井 田 范 围 内 断 层 发 育 的 特 点 及 其 基 本 规 律 ;重 点 分 析 了F2断 层 的 赋 存 特征 ,简 要说 明 了根 据断 层赋 存 规律 对生 产 的指 导作 用 。     

钱家营矿首采区断层在剖面上的延伸规律

通 过对 开滦钱 家营 矿首采 区地 质资料 的综 合分析 ,得 出了 该 矿首 采区 断 层在 剖面 上 的变 化特 征 及规 律,并运用这些 规律 ,对未 采区进 行预 测、预报 ,正确 指导了 采掘 工程的 顺利 进行。     

Seismotectonic environment of occurring the February 3, 1996 Lijiang M=7.0 earthquake, Yunnan Province

Lijiang-Daju fault, the seismogenic fault of the 1996 Lijiang M=7.0 earthquake, can be divided into Lijiang-Yuhu segment in the south and Yuhu-Daju segment in the north. The two segments show clear difference in geological tectonics, but have the similar dynamic features. Both normal dip-slip and sinistral strike-slip coexist on the fault plane. This kind of movement started at the beginning of the Quaternary (2.4～2.5 Ma B.P.). As to the tectonic types, the detachment fault with low angle was developed in the Early Pleistocene and the normal fault with high angle only after the Mid-Pleistocene (0.8 Ma B.P.). Based on the horizontal displacements of gullies and the vertical variance of planation surfaces cross the Lijiang-Daju fault at east piedmont of Yulong-Haba range, the average horizontal and vertical slip rates are calculated. They are 0.84 mm/a and 0.70 mm/a since the Quaternary and 1.56 mm/a and 1.69 mm/a since the Mid-Pleistocene. The movements of the nearly N-S-trending Lijiang-Daju fault are controlled not only by the regional stress field, but also by the variant movement between the Yulong-Haba range and Lijiang basin. The two kinds of dynamic processes form the characteristics of seismotectonic environment of occurring the 1996 Lijiang earthquake.     

Geometric form of Haiyuan fault zone in the crustal interior and dynamics implications

The deep seismic reflection data on profile HY2 are reprocessed by the method of simultaneous inversion of velocity distribution and interface position. By the travel-time inversion with the data of the diving wave Pg and fault plane reflection wave, we determine the geometric form and velocity of Haiyuan fault zone interior and surrounding rock down to 10 km depth. The measured data show that the amplitudes have strong attenuation in the range of stake number 37–39 km, suggesting the fault zone has considerable width in the crustal interior. The results of this paper indicate that to the north of the fault zone the crystalline basement interface upheaves gradually from southwest to northeast and becomes shallow gradually towards northeast, and that to the south of the fault zone, within the basin between Xihua and Nanhua mountains, the folded basement becomes shallow gradually towards southwest. The obliquity of the fault zone is about 70° above the 3 km depth, about 60° in the range of the 3–10 km depths. From the results of this paper and other various citations, we believe that Haiyuan fault zone is in steep state from the Earth’s surface to the depth of 10 km. Foundation item: Joint Seismological Science Foundation of China (201001) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200308, Exploration Geophysical Center, China Earthquake Administration.