邢东矿井构造特征及应力应变场分析

邢东矿井位于太行山隆起带与华北沉陷带的过渡带,通过区域构造应力-应变场分析,本区先后经历了由挤压-拉张的变形过程,变形强度由弱到强。海西期构造应力影响较弱,印支期-中燕山期构造应力作用较为强烈,形成了大量的挤压结构面和压缩构造．燕山晚期-喜山期是构造形成的最终阶段,以拉张伸展变形为主,现今的多数正断层的断裂结构面仍保存有先期的挤压结构面特征。区内构造以断裂构造为主要形式,断层组合形式多样,这些构造形成期次不同,北西向断裂对北东向断裂具有限制作用。     

SOME NEW UNDERSTANDINGS OF LAND-SURFACE PROCESSES IN ARID AREA FROM THE HEIFE*

The survey for the HEIFE(Atmosphere-Land Surface Processes Experiment at Heihe River Basin,Western China) is given in the paper.The following basic subjects for land-surface processes in arid areas are studied:(1) the general characteristics of the energy budget on ground surface in arid areas;(2) the parameterization of the land surface processes;(3) the interaction between oasis and its desert circumstances,a special phenomenon in arid areas.The analysis shows that the sensible heat flux in the surface energy budget is in the majority,and the latent heat flux may be neglected.The influence of atmospheric stratification stability on the turbulent transfer of energy and substance must be considered in parameterization of land surface processes in arid areas.The "cold island effect" phenomenon in oasis and the "humidity inversion" phenomenon in desert near oasis are the result of the interaction between them.The results would improve the understanding of land surface processes in arid areas.     

Oil and gas resource assessment: The linkage between geological analysis and discovery process model results

Two widely-used techniques to estimate the volume of remaining oil and gas resources are discovery process modeling and geologic assessment. Both were used in a recent national assessment of oil and gas resources of the United States. Parallel estimates were obtained for 27 provinces. Geological-based estimates can typically see into areas not available to discovery process models (that is areas with little or no exploration history) and thus, on average, yield higher estimates. However, a linear relation does exist between the mean estimates obtained from these two methods. In addition, other variables were found in a multiple regression model that explained much of the difference. Thus, it is possible to perform discovery process modeling and adjust the estimates to yield results that might be expected from geological-based assessments.     

Rupture process of large earthquakes in the northern Mexico subduction zone

The Cocos plate subducts beneath North America at the Mexico trench. The northernmost segment of this trench, between the Orozco and Rivera fracture zones, has ruptured in a sequence of five large earthquakes from 1973 to 1985; the Jan. 30, 1973 Colima event (M _s 7.5) at the northern end of the segment near Rivera fracture zone; the Mar. 14, 1979 Petatlan event (M _s 7.6) at the southern end of the segment on the Orozco fracture zone; the Oct. 25, 1981 Playa Azul event (M _s 7.3) in the middle of the Michoacan gap; the Sept. 19, 1985 Michoacan mainshock (M _s 8.1); and the Sept. 21, 1985 Michoacan aftershock (M _s 7.6) that reruptured part of the Petatlan zone. Body wave inversion for the rupture process of these earthquakes finds the best: earthquake depth; focal mechanism; overall source time function; and seismic moment, for each earthquake. In addition, we have determined spatial concentrations of seismic moment release for the Colima earthquake, and the Michoacan mainshock and aftershock. These spatial concentrations of slip are interpreted as asperities; and the resultant asperity distribution for Mexico is compared to other subduction zones. The body wave inversion technique also determines theMoment Tensor Rate Functions; but there is no evidence for statistically significant changes in the moment tensor during rupture for any of the five earthquakes. An appendix describes theMoment Tensor Rate Functions methodology in detail.The systematic bias between global and regional determinations of epicentral locations in Mexico must be resolved to enable plotting of asperities with aftershocks and geographic features. We have spatially shifted all of our results to regional determinations of epicenters. The best point source depths for the five earthquakes are all above 30 km, consistent with the idea that the down-dip edge of the seismogenic plate interface in Mexico is shallow compared to other subduction zones. Consideration of uncertainties in the focal mechanisms allows us to state that all five earthquakes occurred on fault planes with the same strike (N65°W to N70°W) and dip (15±3°), except for the smaller Playa Azul event at the down-dip edge which has a steeper dip angle of 20 to 25°. However, the Petatlan earthquake does prefer a fault plane that is rotated to a more east-west orientation—one explanation may be that this earthquake is located near the crest of the subducting Orozco fracture zone. The slip vectors of all five earthquakes are similar and generally consistent with the NUVEL-predicted Cocos-North America convergence direction of N33°E for this segment. The most important deviation is the more northerly slip direction for the Petatlan earthquake. Also, the slip vectors from the Harvard CMT solutions for large and small events in this segment prefer an overall convergence direction of about N20°E to N25°E.All five earthquakes share a common feature in the rupture process: each earthquake has a small initial precursory arrival followed by a large pulse of moment release with a distinct onset. The delay time varies from 4 s for the Playa Azul event to 8 s for the Colima event. While there is some evidence of spatial concentration of moment release for each event, our overall asperity distribution for the northern Mexico segment consists of one clear asperity, in the epicentral region of the 1973 Colima earthquake, and then a scattering of diffuse and overlapping regions of high moment release for the remainder of the segment. This character is directly displayed in the overlapping of rupture zones between the 1979 Petatlan event and the 1985 Michoacan aftershock. This character of the asperity distribution is in contrast to the widely spaced distinct asperities in the northern Japan-Kuriles Islands subduction zone, but is somewhat similar to the asperity distributions found in the central Peru and Santa Cruz Islands subduction zones. Subduction of the Orozco fracture zone may strongly affect the seismogenic character as the overlapping rupture zones are located on the crest of the subducted fracture zone. There is also a distinct change in the physiography of the upper plate that coincides with the subducting fracture zone, and the Guerrero seismic gap to the south of the Petatlan earthquake is in the wake of the Orozco fracture zone. At the northern end, the Rivera fracture zone in the subducting plate and the Colima graben in the upper plate coincide with the northernmost extent of the Colima rupture zone.     

钾霞石制备体系碱性滤液的利用技术

为处理钾长石水热制备钾霞石所产生的碱性滤液,本文采用水热法,考察了氢氧化铝溶解时间、晶化时间、晶化温度、水碱比对钾霞石产率和白度的影响,并对合成钾霞石物相进行了表征。结果表明,合成钾霞石的最佳条件为,氢氧化铝溶解时间为1.5 h,晶化时间为4 h,晶化温度280℃,水碱比为1.8。XRD结果表明,产物为钾霞石粉体。傅里叶变换红外光谱表明,Al(OH)₃中的Al在水热条件下进入到Si—O骨架中形成了Si—O—Al官能团,从而印证了钾霞石的合成。差热分析结果表明,合成钾霞石具有良好的热稳定性。氮气吸附结果表明,合成钾霞石比表面积为5.18 m²/g,平均孔径为32.98 nm。实现了钾长石水热制备钾霞石所剩碱性滤液的资源化利用,并为钾长石水热制备钾霞石提供了一种母液循环的思路,使水热制备钾霞石工业化成为一种可能。     

Research on temporal and spatial distribution, evolutionary character and mechanism of crustal deformation field before and after the Tangshan earthquake

Ｒｅｓｅａｒｃｈｏｎｔｅｍｐｏｒａｌａｎｄｓｐａｔｉａｌｄｉｓｔｒｉｂｕ┐ｔｉｏｎ,ｅｖｏｌｕｔｉｏｎａｒｙｃｈａｒａｃｔｅｒａｎｄｍｅｃｈａｎｉｓｍｏｆｃｒｕｓｔａｌｄｅｆｏｒｍａｔｉｏｎｆｉｅｌｄｂｅｆｏｒｅａｎｄａｆｔｅｒｔｈｅＴａｎｇｓｈａｎ...     

硫铅酸盐“S”型瞬凝水泥干法护壁堵漏技术研究

介绍了硫铝酸盐“Ｓ”型瞬凝水泥干法者漏时使用的配方,阐述了输送工具和扫孔钻具的设计以及灌注工艺技术。     

MODERNIZATION PROCESS IN HISTORICAL ASIAN CITIES AND THEIR CHARACTERISTICS: A COMPARATIVE STUDY ON SEOUL, TOKYO AND BEIJING

Thspaperwaspresatedatthe"94SeoulIntemationalSyInPosiumonCityandffistory"heldonOCtober27to28,l994andthenpublishedinTheJoumaIofSeouIShndesVo.IV.Thepresentvisionhasbeenslighlyrevised.Bejing,SeoulandTokyoarecapitalsofthreeneighbouringcoUnnesinNortheastAsia,wh…     

中国大陆第四纪地壳运动时程

本文从中国大陆有代表性的青藏高原、黄土高原、三峡地区着手,进行了新构造运动剖析。并结合全国火山活动期次,总结出中国大陆第四纪地壳运动的时程变化。从而为进一步探讨新构造运动特点和规律,为国民经济建设及人类生存环境提供了一定的地质背景资料。