We study the mineralogical changes suffered by specimens of natural miocene red and green continental sandstones (from Pozuelos Formation and Tiomayo Formation) cropping out in the Argentine Puna that increase their bulk magnetic susceptibility and change color when thermally treated. We hypothesize that on heating siderite, which is present in small quantities as cement in the studied sandstones, would oxidize and decompose into maghemite and/or magnetite. Subsequent heating to higher temperatures sometimes would bring about the conversion of maghemite and/or magnetite to hematite. Mössbauer spectroscopy proved to be a very valuable tool for the determination of the presence of siderite in small amounts in the studied samples. The present results show that further work is needed in order to fully understand the mineralogical changes suffered by continental sandstones during heating. The characterization of such changes occurred during laboratory routines is relevant, since they can help to better understand natural processes. 相似文献
Based on relevant experimental data of a petroleum cement paste under mechanical loading and chemical leaching, an elastic‐plastic model is first proposed by taking into account plastic shearing and pore collapse. The degradation of mechanical properties induced by the chemical leaching is characterized by a chemical damage variable which is defined as the increase of porosity. Both elastic and plastic properties of the cement paste are affected by the chemical damage. The proposed model is calibrated from and applied to describe mechanical responses in triaxial compression tests respectively on sound and fully leached samples. In the second part, a phenomenological chemical model is defined to establish the relationship between porosity change and calcium dissolution process. The dissolution kinetics is governed by a diffusion law taking into account the variation of diffusion coefficient with calcium concentration. The chemical model is coupled with the mechanical model, and both are applied to describe mechanical response of cement paste samples subjected to progressive chemical leaching and compressive stresses. Comparisons between experimental data and numerical results are presented. 相似文献
This article provides an analysis of the EU Emissions Trading Scheme (ETS) and the harmonized benchmark-based allocation procedures by comparing two energy-intensive sectors with activities in three Member States. These sectors include the cement industry (CEI) and the pulp and paper industry (PPI) in the UK, Sweden, and France. Our results show that the new procedures are better suited for the more homogeneous CEI, in which the outcome of stricter allocation of emissions allowances is consistent between Member States. For the more heterogeneous PPI – in terms of its product portfolios, technical infrastructures, and fuel mixes – the allocation procedures lead to diverse outcomes. It is the lack of product benchmark curves, and the alternative use of benchmark values that are biased towards a fossil fuel-mix and are based on specific energy use rather than emission intensity, which leads to allocations to the PPI that do not represent the average performance of the top 10% of GHG-efficient installations. Another matter is that grandfathering is still present via the historically based production volumes. How to deal with structural change and provisions regarding capacity reductions and partial cessation is an issue that is highly relevant for the PPI but less so for the CEI.
Policy relevance
After an unprecedented amount of consultation with industrial associations and other stakeholders, a harmonized benchmark-based allocation methodology was introduced in the third trading period of the EU ETS. Establishing a reliable and robust benchmark methodology for free allocation that shields against high direct carbon costs, is perceived as fair and politically acceptable, and still incentivizes firms to take action, is a significant challenge. This article contributes to a deeper understanding of the challenges in effectively applying harmonized rules in industrial sectors that are heterogeneous. This is essential for the debate on structural reformation of the EU ETS, and for sharing experiences with other emerging emissions trading systems in the world that also consider benchmark methodologies. 相似文献
Petroleum drill cuttings are usually treated by techniques suitable for particular contaminant groups. The significance of this study consists in the development of a treatment technology that can simultaneously handle the hydrocarbon and metal constituents of drill cuttings. Bioaugmentation is combined with stabilisation/solidification (S/S), within S/S monoliths and in granulated S/S monoliths. Portland cement was used for S/S treatment at 30% binder dosage. Bioaugmentation treatment involved two bacterial densities of a mixed culture bio-preparation. The effects of inclusion of compost, fertiliser and activated carbon were also evaluated. After 28 days, the combined S/S and bioaugmentation treatments recorded up to 15% higher total petroleum hydrocarbon (TPH) loss than control S/S treatment without bioaugmentation. Embedding fertiliser, activated carbon and higher bacterial density within S/S monoliths resulted in the highest (99%) TPH reduction but higher concentrations of metals. The addition of compost and lower bacterial density to granulated S/S monoliths led to similar (98%) TPH degradation and lower amounts of metals. The results suggest that with better mixture optimisation, combining S/S and bioaugmentation could engender more sustainable treatment of drill cuttings. 相似文献
The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q86.0F3.1R10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (Th) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ18O and δ13C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ18O but similar δ13C values. The shale normalized rare earth element (REESN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO2/CH4 and N2/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality. 相似文献
Diagenesis is an essential tool to reconstruct the development of reservoir rocks. Diagenetic processes - precipitation and dissolution - have an influence on pore space. The present paper aims to study the diagenetic history of deep-marine sandstones of the Austrian Alpine Foreland Basin. To reach that goal, sediment petrology and diagenetic features of more than 110 sandstone samples from water- and gas-bearing sections from gas fields within the Oligocene-Miocene Puchkirchen Group and Hall Formation has been investigated. Special emphasis was put on samples in the vicinity of the gas-water contact (GWC). The sediment petrography of sandstones of Puchkirchen Group and Hall Formation is similar; hence their diagenesis proceeded the same way. In fact, primary mineralogy was controlled by paleo-geography with increasing transport distance and diverse detrital input.Sediment petrographically, investigated sandstones from the water-bearing horizon seemed quite comparable to the gas-bearing sediments. In general, they can be classified as feldspatic litharenites to litharenites and display porosities of up to 30% and permeabilities of up to 1300 mD. The carbon and oxygen isotopic composition of bulk carbonate cements from these sandstones range from−3.8 to +2.2 and from −7.5 to +0.2‰ [VPDB]. However, near the Gas-Water Contact (GWC) a horizon with low porosities (<3%) and permeabilities (<0.1 mD) is present. This zone is completely cemented with calcite, which has a blocky/homogenous morphology. A slight, but significant negative shift in δ18O isotopy (−2.5‰) is evident.During early diagenesis the first carbonate generations formed. First a fibrous calcite and afterwards a micritic calcite precipitated. Further siliciclastic minerals, such as quartz and feldspar (K-feldspar and minor plagioclase), exhibit corroded grains. Occasionally, clay minerals (illite; smectite, chlorite) formed as rims around detrital grains. Late diagenesis is indicated by the formation of a low permeable zone at the GWC. 相似文献