A note on “Origin of components in Chilean thermal waters” by

Risacher et al. (2011) have presented voluminous data on thermal waters of Chile that is quite appreciable; however, their work still falls short on several counts. The most notable shortcoming of the work is the presentation and treatment of data. The interpretations are based on questionable premises (viz., extent of seawater intrusion) and considerations (viz., using average chemical composition of rock types for geochemical modeling, considering volcanic rocks as the only rock type in contact with the geothermal fluids) and assumptions not always substantiated by facts (with proper references) could have been corroborated. Use of Cl/Br ratio for discrimination purpose is unconvincing, considering the uncertainty in the measurement of low (<1 mg/L) Br concentration.     

Geochemistry of Paraná-Etendeka basalts from Misiones,Argentina: Some new insights into the petrogenesis of high-Ti continental flood basalts

The Early Cretaceous (∼135–131 Ma) Paraná-Etendeka continental flood basalts, preserved in bulk in the Paraná basin of southern Brazil and vicinity, have been divided into low-Ti and high-Ti types that govern the southern and northern halves of the basin, respectively. We have examined a new sample set from the southern margin of the northern high-Ti segment of Paraná basalts in Misiones, northeastern Argentina. These basalts are strongly to moderately enriched in TiO₂ (2–4 wt.%), have relatively high Ti/Y (300–500), low MgO (3.5–6.5 wt.%), and high Fe (FeO(tot) 12–14 wt.%) and belong to the Pitanga and Paranapanema magma types of Peate et al. (1992). Nd and Sr isotope compositions are quite unvarying with ε_Nd (at 133 Ma) values of −4.6 to −3.6 and initial ⁸⁷Sr/⁸⁶Sr of 0.7054–0.7059 and show no variation with fractionation. Compared to high-Ti lavas in the central and northern parts of the Paraná high-Ti basalt segment, the lavas from Misiones are similar to those in the northeastern magin of the basin but less radiogenic in initial Nd isotope composition than those in the central part. This variation probably reflects mixed EM1-EM2 source components in the sublithospheric mantle. A polybaric melt model of a sublithospheric mantle source at the garnet lherzolite-spinel lherzolite transition is compatible with the observed Ti budget of the Pitanga and Paranapanema lavas, regardless of the Nd isotope composition of their purported source.     

Coupled Model of Two-phase Debris Flow, Sediment Transport and Morphological Evolution

The volume fraction of the solid and liquid phase of debris flows,which evolves simultaneously across terrains,largely determines the dynamic property of debris flows. The entrainment process significantly influences the amplitude of the volume fraction. In this paper,we present a depth-averaged two-phase debris-flow model describing the simultaneous evolution of the phase velocity and depth,the solid and fluid volume fractions and the bed morphological evolution. The model employs the Mohr–Coulomb plasticity for the solid stress,and the fluid stress is modeled as a Newtonian viscous stress. The interfacial momentum transfer includes viscous drag and buoyancy. A new extended entrainment rate formula that satisfies the boundary momentum jump condition(Iverson and Ouyang,2015) is presented. In this formula,the basal traction stress is a function of the solid volume fraction and can take advantage of both the Coulomb and velocity-dependent friction models. A finite volume method using Roe's Riemann approximation is suggested to solve the equations. Three computational cases are conducted and compared with experiments or previous results. The results show that the current computational model and framework are robust and suitable for capturing the characteristics of debris flows.     

构造物理模拟和PIV有限应变分析对构造裂缝预测的启示

油气储层中构造裂缝发育与有限应变状态关系密切,为了探索有限应变分析与构造裂缝预测的新技术方法,此次研究设计完成了一组单侧挤压收敛模型的物理模拟实验,并引入粒子图像测速(PIV,Particle Image Velocimetry)技术对实验过程进行了定量化分析。实验模型在垂向上为含粘性层的多层结构,实验结果形成了一个肉眼可见的箱状褶皱。通过PIV技术可以获取实验模型变形演化过程中各阶段的位移场数据,计算出各阶段的增量应变,实现从初始状态到褶皱形成之后整个变形过程的有限应变分析,探讨构造裂缝成因机制和分布规律,进行定量化裂缝预测。挤压变形过程初期,应变分布范围很广,有限应变较弱(约4%~8%),在挤压方向上的线应变表现为弱压应变,在垂向上的线应变表现为弱张应变,这种现象是褶皱和断层产生前平行层缩短和层增厚的纯剪变形结果,也是区域型张裂缝和剪裂缝形成的主要机制。褶皱和断层即将发育之时至发育之后,应变局限在断层发育的剪切带及附近区域,有限应变表现为较强(达20%)的剪切应变和剪切张应变,是断层面附近简单剪切变形作用的结果,也是局部型剪裂缝和张剪裂缝形成的主要机制。     

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.     

Experimental and theoretical study of a cylindrical oscillating water column device with a quadratic power take-off model

The wave power extraction by a cylindrical oscillating water column (OWC) device with a quadratic power take-off (PTO) model was studied experimentally and theoretically. In the experiment, a scaled model OWC was tested in a wave flume, with an orifice being used to simulate a quadratic PTO mechanism. In the theoretical analysis, the quadratic PTO model was linearized based on Lorenz's principle of equivalent work, which allows us to perform a frequency domain analysis using an eigen-function matching method. The effects of higher harmonic components and the spatial non-uniformity of the surface velocity inside the chamber were discussed. A semi-analytical model was proposed to understand the viscous loss affecting the measured capture length. Our treatment of the quadratic PTO model was validated by comparing quasi-linear theoretical capture length and the laboratory measurement. Our results also showed that the effects of spatial non-uniformity and viscous loss could be noticeable for shorter waves.     

Uncertainty analysis of space–time prisms based on the moment-design method

Space–time prism (STP) is an important concept for the modeling of object movements in space and time. An STP can be conceptualized as the result of the potential path of a moving object revolving around in the three-dimensional space. Though the concept has found applications in time geography, research on the analysis and propagation of uncertainty in STPs, particularly under high degree of nonlinearity, is scanty. Based on the efficiency and effectiveness of the moment-design (M-D) method, this paper proposes an approach to deal with nonlinear error propagation problems in the potential path areas (PPAs) of STPs and their intersections. Propagation of errors to the PPA and its boundary, and to the intersection of two PPAs is investigated. Performance of the proposed method is evaluated via a series of experimental studies. In comparison with the Monte Carlo method and the implicit function method, simulation results show the advantages of the M-D method in the analysis of error propagation in STPs.     

脐带缆在潜器下放过程中的运动建模与仿真

潜器在下放布置过程中需要考虑变长度的脐带缆对其运动的影响,在考虑流的情况下,对脐带缆的有限差分模型进行了改进,并采用最小二乘方法求解由时间和空间上的中心差分格式离散后的非线性方程组。为了验证模型改进的有效性,将潜器在均匀定常流中水平匀速直航时的数值解与该特殊情况下的解析解进行比较,两组解的吻合不仅证实了模型改进的有效性,而且表明上述数值计算方法是可靠且有效的。在潜器下放布置运动给定的情况下,脐带缆的运动仿真结果表明,潜器姿态角的调整会对拖曳点处的缆绳张力大小和变化趋势产生显著的影响,流在改变缆绳空间形状的同时引起了缆绳对潜器作用力和力矩的非线性和时变性,脐带缆总是阻止潜器自身动力对运动速度和姿态角的改变,且对纵荡运动的影响最大。     

The Effect of Concrete Deformation on Displacement of an Axially Loaded Drilled Shaft

This article presents the settlement of drilled shafts resulting from their structural deformations. Although drilled shafts are widely used as foundations for settlement-sensitive structures such as bridges and high-rise buildings, the structural deformations of drilled shafts are not typically taken into account in the design process. However, if unexpected structural deformations of drilled shafts cause additional settlement to the foundation, the serviceability of the superstructure can be jeopardized. Unfortunately, very few research efforts have been made to quantify the structural deformation of drilled shafts; this needs to be addressed to accurately predict the settlement of drilled shafts. In this study, we investigate the effect of structural deformation on displacement of axially loaded drilled shafts. Finite element analyses were performed to quantify the structural deformation of drilled shafts. The analysis results indicated that the structural deformation of drilled shafts could be quite significant for long drilled shafts. The main factors that affected the structural deformation of drilled shafts were found to be pile length, the material properties of drilled shafts, and the relative humidity of surrounding soil. An approximate equation is proposed to estimate the long-term deformation of drilled shafts.