磁铁石英岩型铁矿岩芯光谱编录研究

 对河北省昌黎县闫庄铁矿床的磁铁石英岩型铁矿石261件样品进行了光谱反射率测量，并与其铁含量进行了相关关系研究，目 的是对钻孔岩芯编录的新方法即高光谱岩芯编录在此类矿床中的可行性进行分析。研究结果表明，铁矿石反射率较低，一般为5%~20% ，铁离子的吸收峰主要表现在400~1 100 nm范围内，铁矿石中铁含量与850~900 nm的反射率均值呈现显著指数负相关关系，为高光谱 岩芯编录在此类矿床中的可行性提供了理论依据和技术途径。     

应用CP网络进行岩性识别

为通过测井解决岩性识别问题，引入了具有分类准确、算法简练等优点的CP（Counter-Propagation)网络。在详细介绍CP网络的网络模型和算法的基础上，结合某油田的实际测井资料，进行了CP网络识别研究。应用结果表明：CP网络训练周期短、识别准确率高、不存在收敛问题。通过试验研究得出结论：CP网络完全可以用于解决岩性识别等问题，具有广阔的应用前景。     

非常规综合物化探油气预测研究

非常规综合物化探方法油气预测研究中存在的主要问题为：缺乏系统与综合的基础性理论研究，异常形成的机理还不十分清楚，在参数的优化组合及异常的求取上尚有诸多不足。针对后一种情况，选择松辽盆地东岭构造作为实验区进行了有益的探索。选取低能吸附烃、放射性测氡及土壤热释光三类参数进行了优化组合，分别计算了综合指标MAE与MAC及组合熵，然后对各值采用泛克里格法求取异常，取得了良好的效果。下一步研究应从异常形成的机理入手，建立三维非常规综合物化探油气预测模式，以提高油气预测成功率。     

可调滞回模型的磁流变阻尼器及其试验

本文在现在磁流变阴尼器性能研究的基础上，提出了可调滞回模型的磁流变阻尼器及其试验方法，并进行理论、试验及算例分析。首先，根据恒定电流下磁流变阻尼器的阻尼力滞力特性，利用磁流变材料特性的电流（即磁场）可控特点，建立了变电流下的阻尼力滞回模型；其次，在中通过电路板控制外加电流与装置变形间的函数关系，实现了变电流调节的阻尼力滞回模型；最后，将磁流变阻尼器与橡胶隔震装置结合，形成智能磁流变隔夺装置，并对一个单自由度隔震结构进行了数值仿真分析。     

流动成像测井研究进展

流动成像测井属于对非均匀介质动态的非线性测量，通过对油气井内多相流体信息的投影扫描和反演处理，实时成像显示流体分布及流动状况，国外研制的电导法，电容法仪器采用电导探针或电容元件构成阵列测量探头，分别利用油气与水的导电特性和介电特性差异辨识井内流体，对流动截面的测量局限于个别点上，已在水平井中见到应用效果，但对物场信息投影测量的数据量和分辨率未能满足成像要求。我国提出的电磁法采用环状阵列电极构成测量探头，综合利用油气与水的导电和介电特性差异辨识井内流体，可以测量获得多相流体流动截面的清晰图像，为研究开发全新的流动成像测井系统奠定了良好基础。     

A method to estimate hydraulic conductivity while drilling

A field test and analysis method has been developed to estimate the vertical distribution of hydraulic conductivity in shallow unconsolidated aquifers. The field method uses fluid injection ports and pressure transducers in a hollow auger that measure the hydraulic head outside the auger at several distances from the injection point. A constant injection rate is maintained for a duration time sufficient for the system to become steady state. Exploiting the analogy between electrical resistivity in geophysics and hydraulic flow two methods are used to estimate conductivity with depth: a half-space model based on spherical flow from a point injection at each measurement site, and a one-dimensional inversion of an entire dataset.

The injection methodology, conducted in three separate drilling operations, was investigated for repeatability, reproducibility, linearity, and for different injection sources. Repeatability tests, conducted at 10 levels, demonstrated standard deviations of generally less than 10%. Reproducibility tests conducted in three, closely spaced drilling operations generally showed a standard deviation of less than 20%, which is probably due to lateral variations in hydraulic conductivity. Linearity tests, made to determine dependency on flow rates, showed no indication of a flow rate bias. In order to obtain estimates of the hydraulic conductivity by an independent means, a series of measurements were made by injecting water through screens installed at two separate depths in a monitoring pipe near the measurement site. These estimates differed from the corresponding estimates obtained by injection in the hollow auger by a factor of less than 3.5, which can be attributed to variations in geology and the inaccurate estimates of the distance between the measurement and the injection sites at depth.     

Interpretation of charging on fracture or frictional slip surface of rocks

Fracturing and frictional sliding of quartz and granite under dry condition generates fractoluminescence, charged particle emission and electromagnetic radiation. Various kinds of experiments indicate that surface charge density on fracture or frictional slip surface of quartz and granite is 10⁻⁴ to 10⁻² C/m² which is larger than bound charges induced by the disappearance of piezoelectricity due to the release of stress. Hole and electron trapping centers, which is found in semiconductor devices with the Si–SiO₂ system, are causes of surface charging on fracture or frictional slip surface of quartz crystal. The quantity of the surface charge is enough to cause corona discharge that can generate earthquake lights. The mechanism considering the hole and electron trapping centers has a probability to explain why non-piezoelectric minerals or rocks generate electromagnetic phenomena. It can be one of origins of seismo-electromagnetic phenomena (SEP).     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

钢筋砼摩擦耗能支撑框架结构的单元刚度和力学模型分析

为研究钢筋砼摩擦耗能支撑框架结构的动力反应性能 ,对其中的摩擦耗能器单元和框架杆单元的单元刚度和力学模型做了分析。钢筋砼摩擦耗能支撑单元由支撑杆单元和钢板—橡胶摩擦耗能器单元组成 ,支撑单元可取空间杆单元 ,摩擦耗能器单元为平面应力矩形单元。摩擦耗能器单元的剪切恢复力曲线为理想的弹塑性曲线 ,根据耗能器单元的力学模型 ,可确定其在每一时刻的刚度 ;框架结构空间杆单元的恢复力模型采用双线型模型 ,根据杆单元的力学模型 ,可确定其在每一时刻的刚度。并利用所编制的程序对十层单榀两跨空间普通框架和摩擦耗能支撑框架在地震作用下进行了弹塑性反应时程分析 ,结果表明耗能支撑框架的顶层最大位移明显小于普通框架     

野外简易脱气装置简介

根据水力学原理结合水氡在实验室分析中水样鼓泡脱气的方法 ,进行了大量的野外试验 ,研制开发了野外简易脱气装置。通过几个月的试观测 ,脱气装置气流稳定 ,脱气效率高 ,完全可以满足自动化观测仪器对气量的需求。该装置解决了地下水化学在野外冷水泉无法进行气体观测的难题 ,而且制作简单、费用低廉 ,非常便于推广。