华北地块南缘花山、五丈山岩体LA-ICP-MS锆石U-Pb年龄、地球化学特征及成因

花山复式岩体位于华北地块南缘,采用LA-ICP-MS技术测得复式岩体中的中细粒似斑状黑云二长花岗岩的锆石U-Pb年龄为128±1Ma,此年龄被解释为成岩年龄。该岩体及邻近的五丈山岩体中花岗岩具有高硅、富碱特征,为准铝-弱过铝质高钾钙碱性系列;在稀土和微量元素上,富集LREE、Rb、Ba、K、Sr等大离子亲石元素,亏损HREE、Zr、Hf、Ta、Nb、P、Ti等高场强元素,总体上Eu异常不明显,显示出I-A过渡型花岗岩的特征。锆石Lu-Hf同位素组成表明,花山花岗岩的εHf(t)主要变化于-25.8~-19.6之间,tDM2为2.81~2.43Ga,显示源区物质以古老的壳源物质为主,有年轻组分的参与。与岩体外围多金属成矿年龄的对比分析发现,外围金、钼矿床与花山复式岩体的年龄一致,比五丈山岩体晚20~25Ma,表明金、钼矿的形成与花山岩体在时空上联系密切,该岩体可能为成矿提供了热源。     

安徽齐云山丹霞地貌成因

According to the study of some local scholars (Peng Hua et al., 2000), over 400 sites of Danxia landform have been already discovered in China. Chen Guoda (1935), Zeng Zhaoxuan et al. (1978), Huang Jin et al. (1992; 1994; 1996) and Peng Hua et al. (1998; …     

广东英德市碳酸盐岩地热田地温场特征和成因

广东省英德市横石塘地区的地热田属于碳酸盐岩型地热资源。文章根据钻孔测温资料,结合区域地质资料,分析了该地热田的地温场特征、埋藏条件、补径排条件等。该地热田主要热储层为泥盆―石炭系碳酸盐岩,热水径流特征和地温场特征受吴川―四会深断裂带的一系列构造控制。测温曲线显示：地温场形态呈不规则长椭圆形,长轴方向近北西向,可以推断地温场变化与岩石的断裂、裂隙和溶蚀程度有关。本区无附加型热源,深循环为该区热水的主要形成原因。     

东昆仑德尔尼铜矿喷流岩——铁硅质岩的发现及其成矿意义

德尔尼地区的“炭质(砂)板岩”是一个使用了30多年的岩石名称,前人把这类岩石当作与成矿并无任何关系的一种沉积岩。本次工作发现并证实这类岩石进一步可分为2种：一种为陆源碎屑岩,即正常沉积岩——炭质(砂)板岩,与成矿无直接关系;另一种为海底喷流作用形成的一种喷流岩——铁硅质岩。由此推断德尔尼大型铜(钴)矿床,是一个以海底喷流-沉积成矿为主体的后期有叠加成矿的多期成矿作用形成的矿床。这在德尔尼地区寻找该类矿床有重要的理论意义和指导意义。     

Numerical simulation of the genesis of typhoon Durian (2001) over the South China Sea: The effect of sea surface temperature

Typhoon Durian (2001),which formed over the South China Sea (SCS),was simulated by using the Weather Research and Forecasting (WRF) model. The genesis of typhoon Durian which formed in the monsoon trough was reproduced by numerical simulations. The simulated results agree reasonably well with observations. Two numerical experiments in which the sea surface temperature (SST) was either decreased or increased were performed to investigate the impact of the SST on the genesis of the ty-phoon. When the SST was decreased by 5℃ uniformly for all grids in the model,the winds calculated became divergent in the lower troposphere and convergent in the upper troposphere,creating conditions in which the amount of total latent heat release (TLHR) was low and the tropical cyclone (TC) could not be formed. This simulation shows the importance of the convergence in the lower tropo-sphere and the divergence in the upper troposphere for the genesis of the initial vortex. When the SST was increased by 1℃ uni-formly for all grids,a stronger typhoon was generated in the results with an increase of about 10 m s-1 in the maximum surface wind speed. Only minor differences in intensity were noted during the first 54 h in the simulation with the warmer SST,but apparent dif-ferences in intensity occurred after 54 h when the vortex began to strengthen to typhoon strength. This experiment shows that warmer SST will speed the strengthening from tropical storm strength to typhoon strength and increase the maximum intensity reached,while only minor impact can be seen during the earlier stage of genesis before the TC reaches the tropical storm strength. The results sug-gest that the amount of TLHR may be the dominant factor in determining the formation and the intensification of the TC.     

中哈俄阿尔泰稀有金属矿床时空分布、成因及成矿规律

中哈俄阿尔泰发育许多大型—超大型稀有金属矿床,是世界著名的稀有金属成矿省.该成矿省可分为3个稀有金属成矿带,自西南向东北依次为哈萨克斯坦Kalba-Narym、中国阿尔泰和俄罗斯山区阿尔泰等.这3个成矿带稀有金属矿床以伟晶岩型为主,但伟晶岩与花岗岩关系及其伟晶岩成因不一致:在哈萨克斯坦Kalba-Narym成矿带和俄罗...     

高龙鸡公岩金矿床成因新认识及找矿意义

广西高龙鸡公岩金矿床是广西地矿局在"八五"期间勘查并开发的第一个中型微细粒型金矿.矿体产于中三叠统百逢组地层第三段(T2b3)硅化砂泥岩中,直接受二叠系碳酸盐隆起边缘古侵蚀间沉积断面控制,应属于层控微细粒型金矿床.     

中国雄黄雌黄矿床成因类型及找矿方向

文章阐述了中国雄黄雌黄矿床的矿床分布、矿床类型、控矿因素、矿赋岩石及成矿物质来源,划分了5个成矿带,提出按成矿带寻找不同类型雄黄雌黄矿床的见解.     

浅成热液金矿研究综述

厘定了浅成热液金矿的概念，阐述了其成矿地球动力学环境，矿床本质特征及矿床的分类，指出了浅成熟液金矿研究中存问题及今后的研究取向。     

Microstructural evidence of low‐strain,time‐transgressive subglacial deformation

Microstructural analyses were used to investigate the formation of a macroscale‐massive till at Knud Strand in Denmark. More than 100 thin sections were examined and microstructures mapped and counted for quantitative comparison and interpretation. Microstructures indicative of both brittle (grain lineations, edge‐to‐edge crushed grains) and ductile (turbate structures) deformation are evenly distributed in vertical profiles through the till, suggesting that strain contributed to its formation. Discrete shears (grain lineations and plasmic fabric) probably accommodated most deformation, whereas rotational deformation was less prominent. The microshear geometry fits the predicted Coulomb–Mohr failure criterion, indicating that till behaves as a plastic material. Strain estimate of ca. 10¹ from micromorphological proxies is two–three orders of magnitude lower than expected if the till was subjected to pervasive deformation. A hybrid of lodgement and time‐transgressive deformation is envisaged as the till‐forming processes. Our data suggest that even abundant evidence of microscale deformation at continuing high levels of strain may only record the latest process of deposition and deformation and therefore not fully reflect the complexity of till genesis. Copyright © 2007 John Wiley & Sons, Ltd.