Near‐fault effects on residual displacements of RC structures

Residual displacements of single‐degree‐of‐freedom systems due to ground motions with velocity pulses or fling step displacements are presented as a function of period T and of its ratio to the pulse period T_p. Four hysteretic behaviors are considered: bilinear elastoplastic, stiffness‐degrading with cycling, stiffness‐cum‐strength degrading, with or without pinching. When expressed in terms of T/T_p, peak inelastic and residual displacements due to motions with a pulse or fling appear similar to those due to far‐fault motions, if the response to far‐field records are expressed in terms of the ratio of T to the record's characteristic period. However, as the latter is usually much shorter than the pulse period of motions with fling, the range of periods of interest for common structures becomes a short‐period range under fling motions and exhibits very large amplification of residual and peak inelastic displacements. Similar, but less acute, are the effects of motions with a velocity pulse. Wavelets of different complexity are studied as approximations to near‐fault records. Simple two‐parameter wavelets for fling motions overestimate peak inelastic displacements; those for pulse‐type motions overestimate residual displacements. A more complex four‐parameter wavelet for motions with a velocity pulse predicts overall well residual and peak displacements due to either pulse‐ or fling‐type motions; a hard‐to‐identify parameter of the wavelet impacts little computed residual displacements; another significantly affects them and should be carefully estimated from the record. Even this most successful of wavelets overpredicts residual displacements for the periods of engineering interest. Copyright © 2016 John Wiley & Sons, Ltd.     

Hydrolytic enzymes of the paua Haliotis iris,a marine gastropod (note).

Extracts of the viscera of Haliotis iris (Martyn, 1784) were shown to hydrolyse 2‐hydroxy‐5‐nitrophenyl sulphate at pH 5.5, and the p‐nitrophenyl derivatives of α‐ and β‐D‐galactose, α‐ and β‐D‐mannose, α‐L‐lucose, β‐D‐glucuronic acid, β‐N‐acetyl glucosamine and phosphate at pH 4.0 and 5.5: p‐nitrophenyl‐β‐L‐fucose was not hydrolysed.     

A comparison of growth patterns between non‐indigenous Halophila nipponica and the native sympatric Zostera marina on the southern coast of the Korean peninsula

The growth dynamics of two co‐occurring seagrass species, Zostera marina and Halophila nipponica, were examined on the southern coast of the Korean peninsula. Zostera marina is a native dominant seagrass species in Korean coastal waters, whereas H. nipponica is a non‐native tropical and subtropical species that has extended its distributional range to the temperate coastal areas of Korea. To examine the differences in the growth dynamics of H. nipponica and Z.  marina, their morphology, density, productivity and biomass, as well as local environmental conditions, were monitored monthly from January 2008 to July 2009. Underwater irradiance at the study site was the highest in April 2009 and the lowest in January 2008. Water temperature ranged from 10.4°C in January 2009 to 24.8°C in September 2008. Significant differences in growth dynamics were observed between the species, due to the effect of water temperature at the study site. Density and areal productivity were the highest in April 2008 and June 2008, respectively, for Z.  marina but the highest in July 2008 for H. nipponica. Leaf size, shoot height and shoot weight were the highest in July 2008 for Z.  marina but the highest in August 2008 or September 2008 for H. nipponica. The productivity of both species was strongly correlated with water temperature at the study site. However, the productivity of these species was not strongly correlated with underwater irradiance or the nutrient availability of either the water column or sediment pore water. Zostera marina exhibited the ecological characteristics of a temperate seagrass, whereas H. nipponica retained the features of a subtropical/tropical seagrass, even after adapting to the temperate coastal waters of Korea.     

Roche volume filling and the dissolution of open star clusters

From direct N‐body simulations we find that the dynamical evolution of star clusters is strongly influenced by the Roche volume filling factor. We present a parameter study of the dissolution of open star clusters with different Roche volume filling factors and different particle numbers. We study both Roche volume underfilling and overfilling models and compare with the Roche volume filling case. We find that in the Roche volume overfilling limit of our simulations two‐body relaxation is no longer the dominant dissolution mechanism but the changing cluster potential. We call this mechanism “mass‐loss driven dissolution” in contrast to “two‐body relaxation driven dissolution” which occurs in the Roche volume underfilling regime. We have measured scaling exponents of the dissolution time with the two‐body relaxation time. In this experimental study we find a decreasing scaling exponent with increasing Roche volume filling factor. The evolution of the escaper number in the Roche volume overfilling limit can be described by a log‐logistic differential equation. We report the finding of a resonance condition which may play a role for the evolution of star clusters and may be calibrated by the main periodic orbit in the large island of retrograde quasiperiodic orbits in the Poincaré surfaces of section. We also report on the existence of a stability curve which may be of relevance with respect to the structure of star clusters. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

LA‐ICP‐MS Analysis of Small Samples: Carbonate Reference Materials and Larval Fish Otoliths

This article proposes a methodology to analyse the composition of very small carbonate samples such as larval fish otoliths. The chemical composition of otoliths, which are carbonate structures in the inner ear, is often used to explore population dynamics in fishes. Recent advances in laser ablation‐inductively coupled plasma‐mass spectrometry have suggested its potential application to this field. In this study, analyses were performed using a 193 nm ArF Resonetics LA system, coupled to an Agilent 7700X‐ICP‐MS, with the following ablation parameters: a beam diameter of 5 μm, energy of 3 mJ, 2.7 J cm^?2, laser repetition rate of 10 Hz and translation speed of 2.5 μm s^?1. NIST SRM 610 glass was used as the primary calibration material. Performing this protocol, characterisation of a USGS GP‐4 reference material was achieved with suitable precision and accuracy, but the USGS MACS‐3 reference material appeared more heterogeneous under the ablation conditions tested. Calibration was performed using two different beam diameters (5 and 11 μm). Capelin (Mallotus villosus) otoliths measuring between 10 and 20 μm in diameter were tested. Even though a smaller beam diameter and lower energy were used compared with those normally employed to analyse larger otoliths, the method was successful.     

Towards a direct collapse–load method of design for concrete frames subjected to severe ground motions

Most current methods of design for concrete structures under earthquake loads rely on highly idealized ‘equivalent’ static representations of the seismic loads and linear‐elastic methods of structural analysis. With the continuing development of non‐linear methods of dynamic analysis for the overload behaviour and collapse of complete concrete structures, a more direct and more accurate design procedure becomes possible which considers conditions at system collapse. This paper describes an evaluation procedure that uses non‐linear dynamic collapse–load analysis together with global safety coefficients. A back‐calibration procedure for evaluating the global safety coefficients is also described. The aim of this paper is to open up discussion of alternative methods of design with improved accuracy which are necessary to move towards a direct collapse–load method of design. Copyright © 2002 John Wiley & Sons, Ltd.     

Book Review

In this paper, we examine the applicability of spatial optimization as a generative modelling technique for sustainable land‐use allocation. Specifically, we test whether spatial optimization can be used to generate a number of compromise spatial alternatives that are both feasible and different from each other. We present a new spatial multiobjective optimization model, which encourages efficient utilization of urban space through infill development, compatibility of adjacent land uses, and defensible redevelopment. The model uses a density‐based design constraint developed by the authors. The constraint imposes a predefined level of consistent neighbourhood development to promote contiguity and compactness of urban areas. First, the model is tested on a hypothetical example. Further, we demonstrate a real‐world application of the model to land‐use planning in Chelan, a small environmental amenity town in the north‐central region of the State of Washington, USA. The results indicate that spatial optimization is a promising method for generating land‐use alternatives for further consideration in spatial decision‐making.     

Stream nitrate uptake and transient storage over a gradient of geomorphic complexity,north‐central Colorado,USA

The understanding of nutrient uptake in streams is impeded by a limited understanding of how geomorphic setting and flow regime interact with biogeochemical processing. This study investigated these interactions as they relate to transient storage and nitrate uptake in small agricultural and urban streams. Sites were selected across a gradient of channel conditions and management modifications and included three 180‐m long geomorphically distinct reaches on each of two streams in north‐central Colorado. The agricultural stream has been subject to historically variable cattle‐grazing practices, and the urban stream exhibits various levels of stabilisation and planform alteration. Reach‐scale geomorphic complexity was characterised using highly detailed surveys of channel morphology, substrate, hydraulics and habitat units. Breakthrough‐curve modelling of conservative bromide (Br^?) and nonconservative nitrate (NO₃^?) tracer injections characterised transient storage and nitrate uptake along each reach. Longitudinal roughness and flow depth were positively associated with transient storage, which was related to nitrate uptake, thus underscoring the importance of geomorphic influences on stream biogeochemical processes. In addition, changes in geomorphic characteristics due to temporal discharge variation led to complex responses in nitrate uptake. Copyright © 2011 John Wiley & Sons, Ltd.