山东曹县地区土壤地球化学特征

山东省曹县地区土壤地球化学调查是按浅层土壤样品1点/4 km~2,深层土壤样品1点/16 km~2。测试N,P,K,Cu,Zn,B,Mo,Mn,F,As,Hg,Pb,Cr,Cd等14种指标。在统计这些指标的表层、深层土壤地球化学特征参数的基础上,对其与世界、全省同类参数的差异进行了分析,并分析了区内表层、深层土壤元素含量的相关性,认为该区表层土壤元素含量的显著特征是高F而低P,Zn,Mo。大部分元素在表层土壤中的含量继承了土壤母质的成分特征,但N,P,F,Hg等受人为活动和污染源的作用在表层土壤中明显富集。     

Analysis of soil nail walls performance - Case study

This study surveys the performance of temporary soil nail walls with a maximum height of 29.3 m in the Yas project, located in Tehran. Some numerical models, with various modelling approaches, were developed using finite element software and the proper modelling approaches were specified and verified.The modelling results were analysed and compared with the in situ monitored data. The results demonstrate the model’s horizontal deformations are generally greater than the in situ monitored values. To decrease the differences between models and monitored results, the effect of variations of the soil parameters had been surveyed and the limits of needed variations were specified.     

Leachate studies on fly ash-stabilised expansive clay liners

This paper presents leachate studies on fly ash-stabilised expansive clay liners. Fly ash in different contents (0%, 10%, 20% and 30%) by dry weight of the expansive clay was added to the clay, and the ash-clay blend was compacted as a liner overlying a compacted lateritic clay layer. Deionised water (DIW) and calcium chloride (CaCl₂) solutions of varying concentration (5 mM, 10 mM, 20 mM, 50 mM, 100 mM and 500 mM) were used as the permeating fluids in the leachate studies. Chemical analysis of the leachate was performed. For a given CaCl₂ concentration, the concentrations of both calcium ion and chloride ion in the leachate decreased up to a fly ash content of 20%, and thereafter they increased when the fly ash content was increased to 30%. Further, for a given fly ash content, concentrations of calcium ion and chloride ion increased with increasing CaCl₂ concentration.     

内蒙古北山额勒根乌兰乌拉一带土壤测量地球化学特征及找矿方向

研究区位于内蒙古北山北带,成矿地质条件优越,1∶20万水系沉积物测量异常明显,且分布有额勒根乌兰乌拉斑岩型钼(铜)矿。以1∶5万土壤地球化学测量成果为依据,以地质认识为基础,研究了区内元素地球化学数据特征、地球化学场特征及综合异常特征。认为区内主成矿元素为Mo、Cu、Au,主要的控矿层位为咸水湖组火山岩段,成矿有利侵入体为石炭纪花岗闪长岩。划分出5种综合异常类型,其中与斑岩钼(铜)矿系统有关的综合异常和与奥陶系建造有关的综合异常是今后解剖找矿的重点。     

地质背景对土壤微量元素的影响——以渝北地区为例

研究地质背景对土壤元素的控制特征,可为区域土壤元素地球化学研究、种植施肥和农业布局提供科学依据。本研究利用网格化定位与化学分析的方法,结合GIS技术和相关评价标准,探讨了地质背景对Cl、Mn、B、Zn、Cu和Mo元素含量及分布的影响。结果表明:渝北地区土壤Mn、Cu、Zn元素含量整体处于适中与丰富水平,Mo、B元素丰缺参半;B、Mo元素含量显著高于重庆主城区,Zn元素含量显著高于全国水平。受地质背景影响,B、Cl、Cu、Mn元素呈现高度空间相关性,结构性空间变异起主导作用;Mo、Zn元素表现中等空间相关性,由结构性因素和随机因素双重控制。地层的组对元素含量分布起主控作用,土壤元素含量分布形状在空间上与地层组相对应。成土母岩决定土壤元素含量,是土壤元素含量水平的重要控制因素之一,其影响因素主要为岩石类型,其次为岩石形成的地质时期。土壤类型显著影响元素含量,总体上,Mn、Cu、Zn、Mo、B在石灰岩土中含量最高;除B、Mo元素外,其他元素在黄壤中含量最低。     

上海砂性软土地层水平定向钻进泥浆性能调控技术

上海地区水平定向钻进铺管（HDD）钻遇不易成孔的砂性软土的概率甚高,这种地层对泥浆性能有特殊要求。但目前普遍使用的复配型增效商品土粉基调相近,难以就大量工程个案恰如其分地发挥关键功效。为此,论述了该类工程环境下泥浆性能设计要点,分析了材料添配的作用机理,重点给出了泥浆密度、粘度、切力以及失水量等参数调控的宜于实用的若干配材技术,以提供相类似工程条件下泥浆运用的可参考方法。     

软土区旋喷式插筋微型桩工艺试验研究

软土地质条件下建筑物的沉降变形和承载力要求越来越高,对基础施工工艺提出了较高要求。在高压旋喷施工工艺的基础上,提出旋喷式插筋微型桩施工工艺,开展了微型桩工艺试验研究,结果表明该工艺大幅提高了单桩桩基承载性能,为实际工程应用提供了技术数据支持。     

重度石漠化区不同土地利用方式下土壤养分特征

本文以云南省蒙自市西北勒乡碧色寨村石漠化土地为研究对象,基于主成分分析法（PCA）研究岩溶石漠化区不同土地利用方式下的土壤养分特征。结果表明:（1）研究区土壤各养分指标变异系数介于0.14~1.76,不同土地利用方式下,土壤养分状况有较大差异;（2）研究区土壤12项养分指标可归结为3个主成分,所提供的信息占全部信息的90.69%,其中PC1主要包含了全磷、有效磷、速效钾和有效锰,PC2主要综合了有机碳、全氮、全钙和有效锌,有效铁对PC3具有较大的贡献。（3）对不同用地类型土壤养分的主成分得分进行排序,由大到小依次为火龙果地>林地>封育草地>玉米地,表明植树造林及火龙果种植等方式能有效改善石漠化区的土壤养分状况。建议对样区的石漠化治理应以封山育土为前提,以生态恢复为目的,通过种植火龙果与修复林地改善样区土壤状况,逐步形成生态环境与社会经济协调发展的石漠化综合治理体系。      

地物化方法在航磁异常查证中的应用

航磁异常查证是矿产勘查中的一个重要环节,其目的是通过地面查证,确定异常是否存在,追踪异常源,了解异常源所处的地质环境,对异常作出客观评价,提出进一步工作的建议,为后续资料解释提供依据.通过使用地物化综合方法对黑C-2011-02243号异常查证发现：地质剖面测量和土壤地球化学测量可在地表发现较好的找矿线索;高精度磁测及激电中梯测量则反映了深部地质体及矿化特征.依据查证结果认为,在进行航磁异常查证工作时,可优先进行剖面性的地质、高精度磁法及土壤地球化学测量工作;在分析上述测量结果的基础上安排剖面性的电法测量;如存在进一步找矿信息,可安排面积性物化探测量及工程验证工作.     

Calibration of cyclic constitutive models by oscillating functions

Most structures are subjected to more cyclic loads during their life time than static loads. These cyclic action could be a result of either natural or man-made activities and may lead to soil failure. In order to understand the response of the foundation and its interaction with these complex cyclic loadings, various researchers have over the years developed different constitutive models. Although a lot of research is being carried out on these relatively new models, little or no details exist in literature about the model-based identification of the cyclic constitutive parameters which to a large extent govern the quality of the model output. This could be attributed to the difficulties and complexities of the inverse modeling of such complex phenomena. A variety of optimisation strategies are available for the solution of the sum of least-squares problems as usually done in the field of model calibration. However, for the back analysis (calibration) of the soil response to oscillatory load functions, this article gives insight into the model calibration challenges and also puts forward a method for the inverse modeling of cyclic loaded foundation response such that high-quality solutions are obtained with minimum computational effort.