堆石料大三轴试验的细观模拟

采用三维颗粒流计算程序,对堆石料的大三轴排水剪切试验过程进行了数值模拟。在数值模型的生成过程中,使堆石料集合体达到规定密度和级配;采用动态松弛算法迭代求解,并引入粒间阻尼,以吸收颗粒填装的多余动能使其稳定;颗粒间引入黏结力来提高试样的峰值强度;确定堆石料的细观力学参数,拟合室内试验应力应变曲线。模拟不同围压下堆石料的试验,得到的应力-应变曲线与室内试验基本一致,说明颗粒流方法可以较好的模拟堆石料的大三轴试验过程。由于没有考虑颗粒形状及颗粒破碎的影响,造成大应变剪胀偏大。     

用单片机实现遥控器的红外发射

红外遥控在电子产品中有着越来越广泛的应用.介绍了用凌阳SPCE061A系列单片机实现电子产品的红外遥控发射.     

Modelling of groundwater flow in heterogeneous porous media by finite element method

The HySuf‐FEM code (Hydrodynamic of Subsurface Flow by Finite Element Method) is proposed in this article in order to estimate the spatial variability of the transmissivity values of the Berrechid aquifer (Morocco). The calibration of the model is based on the hydraulic head, hydraulic conductivity and recharge. Three numerical tests are used to validate the model and verify its convergence. The first test case consists in using the steady analytical solution of the Poisson equation. In the second, the model has been compared with the hydrogeological system which is characterized by an unconfined monolayer (isotropic layer) and computed by using PMWIN‐MODFLOW software. The third test case is based on the comparison between the results of HySuf‐FEM and the multiple cell balance method in the aquifer system with natural boundaries case. Good agreement between the Hydrodynamic of Subsurface Flow, the numerical tests and the spatial distribution of the thickening of the hydrogeological system is deduced from the analysis and the interpretations of hydrogeological wells. Copyright © 2011 John Wiley & Sons, Ltd.     

基于地理要素编码的数字地形图入库方法实现及应用

目前建设城市基础地理信息系统的主要数据来源是各城市已经采集的不同比例尺的数字化地形图,而数字化地形图不能直接被GIS软件操作。本研究从实际出发,提出基于地理要素编码的数字地形图入库设计方法,将ArcGIS Engine和Objects Arx2007相结合进行嵌入式二次开发,利用C#,在.NET2005平台下得以实现,并在某城市的基础地理信息系统建设中得到实际应用。     

Selection of spectrum- and seismo-compatible accelerograms for the Tuscany region in Central Italy

This article illustrates the results of a study aimed at developing a methodology for the automatic identification of the seismic input at outcropping rock sites and flat topographic conditions necessary to carry out non-linear dynamic analysis of structures and geotechnical systems. The seismic input is provided in terms of a set of 7 natural accelerograms recorded on outcropping rock and satisfying the average spectral compatibility requirements prescribed by the Italian seismic code (NTC08).The study focuses on the territory encompassing Tuscany region in Central Italy and it has been carried out for six return periods, which are 50, 75, 101, 475, 712 and 949 years. The procedure involved four main steps: (1) grouping of the response spectra with similar features; (2) definition of the reference response spectrum for each group; (3) selection of spectrum-compatible accelerograms using the reference response spectrum of each group; and (4) linear scaling of the accelerograms to satisfy the compatibility requirement with respect to other response spectra of the group. The last step is implemented through an interactive, user-friendly program named SCALCONA 2.0, which provides the seismic input in agreement with the site location and return period specified by the user. The program is freely available at the following web site: http://www.rete.toscana.it/sett/pta/sismica/01informazione/banchedati/input_sismici/progettazione/index.htm.     

海洋大数据处理软件体系结构设计

针对海洋数据格式与海洋信息应用系统的异构性,提出一种基于移动代码(Mobile code)的海洋大数据处理软件体系结构。首先,利用统一的网络服务接口与数据交换格式,规范海洋信息应用系统之间的数据访问与共享。其次,通过移动代码将海洋大数据的处理过程移至云端,提高信息处理效率。应用示例实现了异构海洋信息应用系统间的互操作,并且缩短了海量数据的处理时间,验证了该体系结构在海洋大数据处理中的通用性与有效性。     

干砂强夯动力特性的细观颗粒流分析

通过引进和开发二维颗粒流程序,基于相似理论建立了可以模拟砂土地基强夯加固的细观颗粒流模型,结合小比尺室内细观模型试验,从颗粒细观力学角度入手对干砂在强夯冲击加固过程中的动力反应特性进行了数值模拟。结果表明,数值模拟结果与试验结果有较好的一致性,利用颗粒流模型可以很好地模拟干砂在冲击荷载作用下的锤底动接触应力、颗粒间动接触应力和颗粒位移场分布情况,并可以实时跟踪颗粒的变位及接触应力变化,实现从细观角度揭示干砂强夯动力响应特性,研究工作为今后砂土强夯加固宏细观机制研究提供了一条新的思路。     

Parameterization of the Absorption of the H_2O Continuum,CO_2,O_2,and Other Trace Gases in the Fu-Liou Solar Radiation Program

The absorption properties of the water vapor continuum and a number of weak bands for H2O, O2, CO2, CO, N2O, CH4, and O3 in the solar spectrum are incorporated into the Fu-Liou radiation parameterization program by using the correlated k-distribution method (CKD) for the sorting of absorption lines. The overlap absorption of the H2O lines and the H2O continuum (2500-14500 cm-1) are treated by taking the two gases as a single-mixture gas in transmittance calculations. Furthermore, in order to optimize the computation efforts, CO2 and CH4 in the spectral region 2850-5250 cm-1 are taken as a new single-mixture gas as well. For overlap involving other absorption lines in the Fu-Liou spectral bands, the authors adopt the multiplication rule for transmittance computations under which the absorption spectra for two gases are assumed to be uncorrelated. Compared to the line-by-line (LBL) computation, it is shown that the errors in fluxes introduced by these two approaches within the context of the CKD method are small and less than 0.48% for the H2O line and continuum in the 2500-14500 cm-1 solar spectral region, -1% for H2O (line) H2O (continuum) CO2 CH4 in the spectral region 2850-5250 cm-1, and -1.5% for H2O (line) H2O (continuum) O2 in the 7700-14500 cm-1 spectral region. Analysis also demonstrates that the multiplication rule over a spectral interval as wide as 6800 cm-1 can produce acceptable errors with a maximum percentage value of about 2% in reference to the LBL calculation. Addition of the preceding gases increases the absorption of solar radiation under all sky conditions. For clear sky, the increase in instantaneous solar absorption is about 9%-13% (~12 W m~2) among which the H2O continuum produces the largest increase, while the contributions from O2 and CO2 rank second and third, respectively. In cloudy sky, the addition of absorption amounts to about 6-9 W m-2. The new, improved program with the incorporation of the preceding gases produces a smaller solar absorption in clouds due to the reduced solar flux reaching the cloud top.     

Freeman链码优先级直线提取算法研究

针对目前直线提取算法的局限性,提出了一种简单高效的提取图像中目标物体直线边界的算法。本算法基于链码思想和数字直线特征,首先对图像进行边缘检测,对边缘检测后的图像按照优先级进行链码跟踪,获取初始链码;然后通过距离约束提高链码的直线性,剔除噪声和细节;最后进行直线合并,完成直线提取。实验表明,本文提出的算法能高效、准确地检测出图像中物体边界的直线,特别对较大的影像计算量小,抗噪能力强,适用于实时处理。