PDC钻头在寺河煤矿瓦斯预抽放钻井中的应用

在寺河矿区一期瓦斯地面预抽放钻井施工中，使用传统的镶齿三牙轮钻头钻进，钻进速度低，仅为2.0m／h，且井斜不易控制、钻头寿命短、成本较高。通过对寺河煤矿地层特征的分析，在二期工程施工中，9#煤以上地层优选六翼内凹式PDC钻头钻进，采取一定技术措施并合理调整钻压、转速及泵量等钻进参数，钻速可达7．0m/h，井斜也得到有效控制，降低了钻井成本。     

非等截面桩超声波成孔质量检测

分析了非等截面超声波成孔质量检测的几个主要影响因素,给出了相应得改进措施。用工程实例说明超声波反射技术是一种保证非等截面桩成孔质量和成桩质量必不可少的检测方法。     

福建省滨海火电厂地质灾害问题及风险控制探讨

滨海火力发电厂工程主要包括厂区建筑、码头、管道、取排水、填海和贮灰场等工程。其主要面临着福建省海岸带构造运动、断裂及地震活动、港湾淤积、海底滑坡、软土地基、海底活动地貌、基岩不均匀风化以及人类工程活动等主要的灾害性地质因素。通过对这些因素潜在的致灾特点分析，提出了滨海火电厂地质灾害风险控制应包括选址阶段地质灾害风险回避、设计施工阶段地质灾害风险处理及运行阶段地质灾害风险监控等3方面。地质灾害风险评估是滨海火电厂地质灾害风险控制的首要任务。针对滨海电厂工程的特点，评估内容应着重于地质灾害危险性评估及易损性评估。选址阶段地质灾害风险回避主要是对构造不稳定的回避。地质灾害风险处理主要是电厂工程的基础处理及管道抗冲刷处理。电厂运行阶段地质灾害风险监控主要是对建筑物基础稳定性及海域冲淤变化的监控。     

襄樊汉江四桥大口径灌注桩成孔施工实践

介绍了使用泥浆护壁气举反循环回转钻进工艺进行襄樊汉江四桥大口径嵌岩桩的施工实践。施工中采用下置双护简隔离卵石层，合理选用钻头类型(卵砾石层采用五翼合金刮刀钻头，基岩采用球齿滚刀钻头)和钻进参数(混合器沉没深度，尾管长度，孔内空气流量与压力)，摸索与总结出一套复杂地层成孔施工经验。     

煤田勘查超千米深孔快速钻进技术探讨

针对目前国内煤田勘查主要机具及工艺技术方法存在的主要问题,结合煤田勘查地层地质条件和超千米深孔施工要求,研制了液压立轴式HTJ-2000型钻机和新型绳索取心钻具,并就配套设备选型、钻进工艺、钻进参数、泥浆指标及应用效果进行了阐述.该项技术的应用,已明显提高了钻效,使钻孔深度达到1 350m.     

Combined Digital Photogrammetry and Time-of-Flight Laser Scanning for Monitoring Cliff Evolution

Although cliffs form approximately 75% of the world's coastline, the understanding of the processes through which they evolve remains limited because of a lack of quantitative data on the morphological changes they undergo. In this paper the combination of terrestrial time-of-flight laser scanning with high-resolution digital photogrammetry is examined to generate high-quality data-sets pertaining to the geomorphic processes governing cliff development. The study was undertaken on a section of hard rock cliffs in North Yorkshire, UK, which has been monitored over a 12-month period. High-density, laser-scanned point clouds have been used to produce an accurate representation of these complex surfaces, free from the optical variations that degrade photographic data. These data-sets have been combined with high-resolution photographic monitoring, resampled with the fixed accuracies of the terrestrial laser survey, to generate a new approach to recording the volumetric changes in complex coastal cliffs. This has led to significant improvements in the understanding of the activity patterns of coastal cliffs.     

DGSC—203型液动射流冲击器在地热井的试验

介绍了新研制的DGSC－203石油钻井液动射液冲击器的性能参数及结构设计上的创新点，测试所获得的排量与压降之间的关系曲线可指导冲击器的使用。生产性试验证明该冲击器工作稳定，可大幅度提高硬地层钻井效率，克服钻柱振动，延长钻柱的使用寿命，具有良好应用前景。     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

交流变频调速CD-2B型岩心钻机的研制

介绍了交流变频调速CD－2B型岩心钻机研制情况，技术参数，主要特点及型式检验，生产试验等情况。     

标定大陆科学钻探孔区地震反射体

在中国大陆科学钻探孔区 (江苏省东海县南部 )进行了系统的地球物理调查 ,包括二维地震测网和专门的地震剖面 ,大地电磁法和位场方法等 .地震调查表明 ,在超高压变质岩出露区上地壳充满了反射体 ,包括倾斜反射体与上拱的反射弧 .本文介绍大陆科学钻探先行研究中地震调查的成果 .根据大陆科学钻探预先导孔的岩芯和测井资料、井旁VSP和数值模拟结果证实 ,高波速的榴辉岩体、破碎断裂带和大型韧性剪切带都可引起倾斜的地震反射 ,而上拱的弧形反射体则是由近似直立的榴辉岩体和其中的破碎带的综合反映 .由于地壳深部广泛分布着经受变质的岩石 ,上述研究结果对标定地壳中的反射地震信号具有一定意义