Internal erosion of chemically reinforced granular materials: a mathematical modeling approach

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.     

Flow and deposition of pyroclastic granular flows: A type example from the 1975 Ngauruhoe eruption,New Zealand

Small-volume pyroclastic density currents (PDCs) are generated frequently during explosive eruptions with little warning. Assessing their hazard requires a physical understanding of their transport and sedimentation processes which is best achieved by the testing of experimental and numerical models of geophysical mass flows against natural flows and/or deposits. To this end we report on one of the most detailed sedimentological studies ever carried out on a series of pristine small-volume PDC deposits from the 1975 eruption of Ngauruhoe volcano, whose emplacement were also witnessed during eruption. Using high-resolution GPS surveys, a series of lateral excavations across the deposits, and bulk sedimentological analysis we constrained the geomorphology, internal structure and texture of the deposits with respect to laterally varying modes of deposition.     

高强度粗颗粒金刚石的合成技术研究

在高温高压下,六方晶格的石墨转变为立方晶格的金刚石。选用灰分含量少、气孔分布均匀的T621A石墨为碳源,选择化学成分范围偏值小、杂质含量少的镍锰钴合金为触媒以及优质粉压叶腊石为传压介质,在高温、适压、长时间及其它条件下,合成高强度粗颗粒的优质金刚石取得了良好的效果。     

A note on permeability changes in geologic material due to stress

Summary Stress produces framatic changes in fluid permeability of geologic materials. An increase of nearly threefold occurred in granite at high stress, an increase of 20 percent in sandstone, and a hundredfold decrease in compacted sand. Permeability of sand and sandstone did not follow the effective stress law. Flow along joints was very sensitive to effected stress changes, a fourfold change being caused by as little as 1.0 MPa.     

Multiscale approach to geo‐composite cellular structures subjected to rock impacts

Geo‐composite cellular structures are an efficient technological solution for various applications in civil engineering. This type of structure is particularly well adapted to resisting rockfalls and can act as a defensive structure. However, the design of such structures is for the most part empirically based; this lack of research‐based design stagnates optimization and advanced development. In this paper, the mechanical behaviour of a geo‐composite cellular structure is investigated using a multi‐scale approach, from the individual cell made up of an assembly of rocky particles contained in a wire netting cage to the entire structure composed of a regular array of cells. Based on discrete modelling of both the cell and structure scales, a computational tool has been developed for design purposes. Copyright © 2007 John Wiley & Sons, Ltd.     

Discrete modelling of time‐dependent rockfill behaviour

This modelling study deals with the time‐dependent behaviour of rockfill media, which is of particular interest during the life of rockfill dams. Breakage of rock blocks and crack propagation are the main processes responsible for rockfill creep and collapse. The modelling procedure presented here is performed on two scales: on the rock block scale, where the grain is taken to be an assembly of rigid particles initially endowed with cohesive bonds, and on the rockfill scale, which is taken to involve a set of breakable grains interacting via contact and friction processes. The grain breakage process is described in term of a thermodynamically consistent damage interface model, where the damage is a gradual delayed process. This model was implemented in a non‐smooth contact dynamics code. The effects of the main parameters involved were analysed by performing numerical studies. The ability of the model to predict the creep behaviour of rockfill media is confirmed by presenting several simulations. Copyright © 2008 John Wiley & Sons, Ltd.     

珠江口盆地荔湾井区珠江组深水扇沉积特征

珠江口盆地白云凹陷荔湾深水区为油气勘探有利区域,通过岩石学和古生物组合特征研究,认为该区珠江组下部属于典型的深水扇沉积,可划分为早期盆地扇和晚期斜坡扇两种类型,两类深水扇都以发育颗粒流、砂质碎屑流及低密度浊流等顺坡重力流沉积为主,同时夹有少量内波和等深流等深水牵引流改造沉积。砂质碎屑流为两类深水扇水道砂体的主要沉积类型,发育有逆-正粒序层理、平行层理和水平层理,粒序层内可见各种丰富的液化变形和生物逃逸构造,而水平层内发育有更多的生物钻孔和扰动现象。两类深水扇的沉积构造和古生物特征有明显差异,其中盆地扇水道砂岩中普遍含硅质小砾石,水道间泥岩中含有较多保存完好的抱球虫化石,斜坡扇水道砂岩以富含炭泥屑为典型特征,水道间泥岩含有更丰富的颗石藻和抱球虫化石,其中部分抱球虫和颗石具有遭受海底溶蚀作用的现象,指示斜坡扇相对盆地扇有更大的水体深度。平面上两类深水扇具有相似的重力流沉积的分带性,都具有自陆架坡折向盆地方向由颗粒流沉积逐渐向砂质碎屑流和近源高密度浊流、远源低密度浊流等单向演化的特点。     

福建某低品位钼矿选矿试验研究

针对福建某低品位钼矿矿石性质,确定了粗磨粗选、粗精矿再磨精选的浮选方案。采用该浮选方案及合理的选别条件,对含钼为0.08%的钼原矿选别,获得钼精矿品位52.45%、钼精矿产率为0.14%、钼回收率90.19%的良好指标。     

基于地籍测量的惯性系统初始对准方法研究

地籍测量过程中具有静态、可调平和转位的特点,在静基座条件下,捷联惯性测量系统(SIMS)粗对准的失准角与卡尔曼滤波精对准的失准角相当,但是解析粗对准的方位角误差较大。本文在建立SIMS静基座粗对准误差方程的基础上,对影响解析粗对准精度的误差因素进行分析,提出利用光纤陀螺寻北仪进行四位置转位寻北的方法来估算方位角的精度,以提高方位角的估计精度。仿真结果表明,该方法可以有效地提高对准精度,适合于静基座外界干扰小的捷联式惯性测量系统上,在一定程度上可以直接作为对准的结果用于地籍测量定位解算。     

An enhanced constitutive model for crushable granular materials

Studies in the past have tried to reproduce the mechanical behaviour of granular materials by proposing constitutive relations based on a common assumption that model parameters and parameters describing the properties, including gradation of individual grains are inevitably linked. However successful these models have proved to be, they cannot account for the changes in granular assembly behaviour if the grains start to break during mechanical loading. This paper proposes to analyse the relation between grading change and the mechanical behaviour of granular assembly. A way to model the influence of grain breakage is to use a critical state‐based model. The influence of the amount of grain breakage during loading, depending on the individual grain strength and size distribution, can be introduced into constitutive relations by means of a new parameter that controls the evolution of critical state with changes in grain size distribution. Experimental data from a calcareous sand, a quartz sand, and a rockfill material were compared with numerical results and good‐quality simulations were obtained. The main consequences of grain breakage are increased compressibility and a gradual dilatancy disappearance in the granular material. The critical state concept is also enriched by considering its overall relation to the evolution of the granular material. Copyright © 2009 John Wiley & Sons, Ltd.