黄河上游第四纪河流地貌演化--兼论青藏高原1∶25万新生代地质填图地貌演化调查

在青藏高原1∶25万地质填图中,新生代地貌演化调查方法是查明地貌组成的形态、分布、形成年代等特征,分析地貌成因类型,研究地貌与构造、气候、沉积的关系,通过夷平面、河流阶地等反映隆升过程的标志性地貌面调查,分析地貌发展阶段,建立区域地貌演化史.由黄河上游羊曲段阶地地貌调查结果,推断黄河在0.03 Ma才切开共和南山.对比黄河上游不同发育地段阶地,表明黄河上游地貌演化过程是伴随高原阶段隆升而向上游阶段性溯源侵蚀发展的.1.6 Ma黄河稳定出现在民和-兰州-临夏,1.1 Ma切开积石峡到达化隆-贵德,0.15 Ma切开龙羊峡出现于共和盆地,约0.03 Ma经历最新抬升事件,切开贵南南山及西秦岭,并沟通若尔盖盆地抵达黄河源区.     

金矿测年方法讨论及定年中存在的问题

准确的成岩成矿年代测定是矿床研究和对比的基础。然而近几年来 ,不同的研究者对同一矿床采用不同的定年方法得出了相差十分悬殊的成岩成矿年龄的报道屡见不鲜。为此笔者在分析了不同定年方法适用性的同时 ,强调了在金矿定年中要加强对金矿成岩成矿地质背景的研究 ,重视不同地质体与成矿的先后关系 ,确定标志性地质体 ,选择合适的定年方法 ,测定标志性地质体和矿体的成岩成矿年代 ,使成岩成矿年代互为限定 ,得到高质量的年代学数据。     

Synthesis of zeolites using fly ash and their application in removing heavy metals from waters

Fly ash is the solid waste of thermal power plants where coal is used as fuel, and its management and utilization have been of environmental concern for decades. Since the technique of synthesizing zeolite from coal fly ash was introduced by Holler[1] (19…     

高密度电法勘探在岩溶查找中的应用

介绍了武汉市汤逊湖污水处理厂厂址的地质概况和地球物理特征，以及高密度电法勘探的施工方案，分析了视电阻率异常特征，并说明了其异常验证情况。高密度电法勘探结果表明该区存在溶洞，为施工提供了决策依据，建议在有溶洞的地段采取相应措施，以防止工程建设后发生地质灾害。     

小浪底工程岩体力学参数研究

本文系统研究了小浪底工程的岩体的强度特征,采用了室内试验,野外结构面统计,工程地质类比法、模型试验法和Hoek Brown的经验法,估算了工程岩体的力学指标,指出了上述各种方法中所存在的不足,认为在工程实践中,应尽可能使用多种估计方法,交叉校核所得参数,以提高参数的可靠性,保证工程的安全,节约投资。     

Architecture of coastal and alluvial deposits in an extensional basin: the Carboniferous Joggins Formation of eastern Canada

Abstract The Joggins Formation was deposited in the Cumberland Basin, which experienced rapid mid‐Carboniferous subsidence on bounding faults. A 600 m measured section of coastal and alluvial plain strata comprises cycles tens to hundreds of metres thick. The cycles commence with coal and fossiliferous limestone/siltstone intervals, interpreted as widespread flooding events. These intervals are overlain by coarsening‐upward successions capped by planar‐based sandstone mounds, up to 100 m in width that represent the progradation of small, river‐generated delta lobes into a standing body of open water developed during transgression. The overlying strata contain sand‐rich heterolithic packages, 1–8 m thick, that are associated with channel bodies 2–3 m thick and 10–50 m wide. Drifted plant debris, Calamites groves and erect lycopsid trees are preserved within these predominantly green‐grey heterolithic sediments, which were deposited on a coastal wetland or deltaic plain traversed by channel systems. The cycles conclude with red siltstones, containing calcareous nodules, that are interbedded with thin sandstones and associated with both single‐storey channel bodies (1–1·5 m thick and 2–3 m wide) and larger, multistorey channels (3–6 m thick) with incised margins. Numerous channel bodies at the same level suggest that multiple‐channel, anastomosed river systems were developed on a well‐drained floodplain. Many minor flooding surfaces divide the strata into parasequences with dominantly progradational and aggradational stacking patterns. Multistorey channel bodies are relatively thin, fine grained and modestly incised, and palaeosols are immature and cumulative. The abundance and prominence of flooding surfaces suggests that base‐level rise was enhanced, whereas the lack of evidence for abrupt basinward stepping of facies belts, coupled with the absence of strong fluvial incision and mature palaeosols, suggests that base‐level fall was suppressed. These architectural features are considered to reflect a tectonic architectural signature, in accordance with the high‐subsidence basinal setting. Evidence for restricted marine influence and variation in floral assemblages suggests modulation by eustatic and climatic effects, although their relative importance is uncertain.     

青藏高原1∶25万区域地质调查地貌年代学研究

高原隆升及剥蚀作用的复杂性与区域差异性以及高原恶劣的气候、地理条件,使得在青藏高原空白区1∶25万区域地质调查中进行地貌年代学研究具有很大的现实意义.由于地貌是高原隆升、环境演化、新构造运动等的信息载体,地貌年代有助于重塑这些地质作用的发生时间及发展过程,因此地貌年代学研究具有重要的技术意义.1∶25万银石山幅的工作表明,地貌年代学调查对高原隆升及环境演化过程研究具有良好效果.     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

新疆西达里亚T-II油藏储层三维建模研究

在新疆西达里亚T-Ⅱ油气藏的储层表征研究中,首先进行了地质及测井解释,在此基础上应用地质统计学方法进行了三维储层地质建模,建模过程中采用先建立砂层格架,再建立属性参数的“两步建模”研究思路,理论上减少了砂体与属性参数的解释矛盾与误差,提高了属性模型精确度.通过实际生产动态对属性模型进行检验,证明建模结果是正确的.     

济宁二号矿孤岛工作面冲击矿压危险及其控制

孤岛工作面及其周围巷道附近应力集中程度高,顶板运动剧烈,再加上地质构造的影响,采深较大时,冲击危险程度就高,很容易引发冲击矿压。《煤矿安全规程》要求孤岛工作面按冲击矿压危险工作面来管理。孤岛工作面冲击矿压危险检测预报及控制的技术是先分析冲击危险程度,确定冲击危险指数,提出早期预报;采用电磁辐射和钻屑法进行及时预报;采用卸压爆破进行处理,并采用电磁辐射和钻屑法检验防治措施的效果。实践证明,这套技术安全、可靠、有效,能够保证工作面的安全高效生产。