用地震反射波定量解释煤层厚度的方法

一、引言 工业可采煤层厚度一般为1.5m,如何从地震资料上准确圈定1m厚的煤层边界、并定量解释煤层厚度、准确计算地质储量,国外一些学者研究了薄层地震反射波的动力学特征与薄层厚度的关系后,得出了不同的薄层垂直分辨率标准,Widess用零相位子波作实验时,发现当薄层厚度为λ/8(λ是地震子波的主波长)时,反射波形正好是入射波的导数,并可直观地鉴别顶底反射;Kallweit利用可控震源研究了薄层响应的频谱后,提出了分辨地震波的极限为1/(1.4f)(f为地震子波的上限频率),经主频换算后,此     

An analysis of coal bump liability in a bump prone mine

Summary This paper presents an analysis of causes of bump in a deep coal mine. The analysis consists of in-mine measurement determination, analysis of physical and mechanical properties of mine materials and simulation of mine layout and mining sequence. Major factors contributing to the causes of bump have been reviewed and those that are related to this case have been identified and simulated analytically using a three-dimensional finite element method.     

Structural relationships between a brown coal and its kerogen and humic acid fractions

A South Australian Tertiary brown coal is fractionated into humic acid and kerogen fractions. These related samples are then subjected to a number of different analytical techniques including infrared and¹³C-Nuclear Magnetic Resonance spectroscopies and pertrifluoroacetic acid oxidation. Structural conclusions are drawn from an integrated consideration of the data. Brown coal aliphatic structure is concentrated in the kerogen and the solvent soluble polar acid fractions. The humic acids are the most aromatic and contain a high degree of hydrogen bonding. Only very minor amounts of long polymethylene chain structures are observed in the humic acids, in complete contrast to the kerogen fraction. Different organic detrital origins are proposed for the coal fractions.     

Multifacetted study of a cretaceous coal with algal affinities—II. Composition of liquefaction products

Two hydrogen-rich lithobodies of highly alipathic character from a coal occurring in southwest Utah, have been studied. Bituminite (>50%), vitrinite (25–30%) and liptodetrinite (7–12%) are the principal macerals. The hexane-soluble products of hydrogenating the lithotypes at 400° with tetralin and hydrogen have been analyzed by GC-MS. Products identified include homologous series of alkylated naphthalenes, phenols, furans, cyclohexenones and hydroxy-pyridines. In the case of furans, the alkyl groups extend beyond C₃₀. Materials released by Soxhlet extraction with pyridine consist chiefly of homologous series of fatty acids and their methyl esters and of methyl alkyl ketones, which were not found in the hydrogenation products. The long alkyl chains in these substances can account for about 75% of the alkanes found in the hydrogenation products but not in the extracts. Most of the compounds mentioned in the foregoing are thought to be physically held or trapped in the coal, rather than chemically combined in its macromolecular network. Except for the fatty acids, the origins of these substances are difficult to identify.     

Some chemical structural features of coals of differing maceral distributions and stratigraphy

Six North American bituminous coals (four Carboniferous and two Cretaceous) and eight maceral concentrates from Carboniferous British seams have been heated with tetralin and hydrogen to 400°C. The hexane-soluble parts of the products were separated by column chromatography and the fractions were then analyzed by gas chromatography/mass spectrometry. In all cases the aromatic hydrocarbon fraction was a very complex mixture containing a number of alkylated biphenyls, diphenylmethanes and -ethanes, and polycyclic compounds. However single ioncchromatography (m/z = 142) showed that, in addition to these, the products from five of the six American coals contained homologous series of long chain n-alkylnapththalenes with alkyl groups extending to C₁₆. In other fractions from the American coals, homologous series of n-alkylfurans and alkylphenols were found to be major components, as also were many alkylcyclohexenones related to isophorone. Extensive homologous series of n-alkyl aromatics were not detected in products from any of six vitrinites from British seams, though series of n- and iso-alkylphenols were found in the products from two sporinite concentrates. A number of polycyclic ketones apparently related to sterols were found in the products from the British vitrinites but not from any American coals. Reasons for what appear to be systematic structural differences between the American and British coals are discussed. Differences in stratigraphy are noted and it seems not impossible that differences in source vegetation are significant.     

Use of rock classification to estimate roof caving span in oblong workings

Summary Indian coal measures have widely varying caving characteristics. The maximum roof span of a longwall or depillaring panel at the time of nether roof collapse is shown to have a direct relation withRQD from a study of 12 case histories. A similar relation between maximum unsupported span of openings and rock mass quality as defined by theQ-system was also demonstrated. A simple nomogram is presented to predict the face advance required to cause roof collapse when theRQD or rock mass quality is known.     

Roof bolting in underground mining: a state-of-the-art review

Conclusions With continuing investigations and developments, roof bolting today can in most cases successfully reinforce the mine roof in underground mining. In order to cope with the increasing use of roof bolts, efforts should be made to maximize the safety and minimize the cost. With regard to mechanical bolting, two important parameters need more advanced improvements and study, namely, optimum design of the shape and type of expansion shell and optimum bolt tension for a specific bolt pattern. For the fully grouted resin bolt, the most critical requirement is to develop a fast-setting, low-cost, intoxic, inflammable grouting material that can be used in the high speed mining cycle. It should be noted that geological conditions such as the strata type, rock properties,in situ stress, and planes of weakness play an important role in the successful application of any roof bolting system. These factors should be specified as accurately and quantitatively as possible in the design of any roof bolting system. Finally, proper and careful installation and continuous monitoring are imperative for the success of any roof bolting system.     

Importance of the oxidation/maturation pair in the evolution of humic coals

The natural thermal evolution of type III coals (Humic origin) is expressed during diagenesis by a loss of oxygen as CO₂ and H₂O. Other phenomena such as oxidation can cause extensive geochemical modifications and may complicate the effects of simple maturation.Humic coals from the Jurassic in southeastern Utah were studied by elemental analysis, Rock-Eval pyrolysis and infrared spectroscopy. In a van Krevelen diagram (atomic H/C vs atomic O/C), the samples fall within the envelope defined by 860 reference humic coals covering the entire range of diagenesis. Nevertheless, various criteria (geochemical, petrographic, geological and microscopic) cast doubt upon the interpretation that such a distribution of coal composition results from thermal maturation.The same criteria indicate the intervention of redox phenomena. Comparison of our results with those from artificial and natural oxidation shows that these coals were subjected to an oxidation process different from ordinary late alteration. This process was probably due to circulation of highly oxidizing saline water causing oxygen fixation and the transformation of carboxyls into carboxylate anions. The cations that were fixed are oxygenated and certainly contain calcium, but also uranium and perhaps several other cations (V, Mo, Fe...). Emphasis is placed on possible mechanisms that cause such phenomena.