Epicentral distribution in 2007

For showing the epicentral distribution in and near China as well as all over the world,two epicentral maps for the earthquakes occurred last year are published annually in the 6-th issue     

Strong earthquake activity all over the world and strong-moderate earthquake activity within and near China (February 2008～March 2008)

Illustration All the data in this catalog are chosen from the ″Preliminary Seismological Report of Chi-nese Seismic Stations″ (Its abbreviation is ″Monthly Report″). The catalog includes the events of     

Body-wave Attenuation in the Region of Garda, Italy

We analyzed the spectral amplitude decay with hypocentral distance of P and S waves generated by 76 small magnitude earthquakes (M_L 0.9–3.8) located in the Garda region, Central-Eastern Alps, Italy. These events were recorded by 18 stations with velocity sensors, in a distance range between 8 and 120 km. We calculated nonparametric attenuation functions (NAF) and estimated the quality factor Q of both body waves at 17 different frequencies between 2 and 25 Hz. Assuming a homogeneous model we found that the Q frequency dependence of P and S can be approximated with the functions Q _P = 65 f ^0.9 and Q _S = 160 f ^0.6 , respectively. At 2 Hz the Q _S /Q _P ratio reaches the highest value of 2.8. At higher frequencies Q _S /Q _P varies between 0.7 and 1.7, suggesting that for this frequency band scattering may be an important attenuation mechanism in the region of Garda. To explore the variation of Q in depth, we estimated Q at short (r ≤ 30 km) and intermediate (35–90 km) distance paths. We found that in the shallow crust P waves attenuate more than S (1.3 < Q _S /Q _P < 2.5). Moreover, P waves traveling along paths in the lower crust (depths approximately greater than 30 km) attenuate more than S waves. To quantify the observed variability of Q in depth we considered a three-layer model and inverted the NAF to estimate Q in each layer. We found that in the crust Q increases with depth. However, in the upper mantle (~40–50 km depth) Q decreases and in particular the high frequency Q _S (f > 9 Hz) has values similar to those estimated for the shallow layer of the crust.     

First Order Seismic Microzonation of Haldia, Bengal Basin (India) Using a GIS Platform

The seismic microzonation of the Bengal Basin, Haldia region, India is carried out using the Analytical Hierarchy Process (AHP) on the Geographic Information System (GIS). Three themes are used for the seismic microzonation, namely Peak Ground Acceleration (PGA), predominant frequency and elevation map. An analysis of the maximum magnitude (m _max) and the b value is carried out after preparing the earthquake catalogue from various sources. On the basis of the tectonic set up and seismicity of the region, five seismic zones are delineated which can be a threat to Haldia. They are broadly classified as Zone 1: Arakan-Yoma Zone (AYZ), Zone 2: Himalayan Zone (HZ), Zone 3: Shillong Plateau Zone (SPZ), Zone 4: Bay of Bengal Zone (BBZ) and Zone 5: Shield Zone (SZ). The m _max for Zones 1, 2, 3, 4 and 5 are 8.30 ± 0.51, 9.09 ± 0.58, 9.20 ± 0.51, 6.62 ± 0.43 and 6.61 ± 0.43, respectively. The PGA value is computed for Haldia following the attenuation relationship taking the m _max of each source zone. The expected PGA at Haldia varies from 0.09–0.19 g. The predominant frequency of Haldia is also calculated using the H/V ratio with a frequency ranging from 0.1–3.0 Hz. The elevation map of Haldia is also generated using the Shuttle Radar Topography Mission (STRM) data. A first-order seismic microzonation map of Haldia is prepared in which four zones of hazard have been broadly classified for Haldia as very high seismic hazard zone, high seismic hazard zone, moderate seismic hazard zone and less seismic hazard zone. The very high seismic hazard zone is observed along the southern part of Haldia where there are major industrial and port facilities. The PGA for the four hazard zones are: 0.09–0.13 g for low hazard zone, > 0.13–0.15 g for moderate hazard zone, > 0.15–0.16 g for high hazard zone and > 0.16–0.19 g for very high hazard zone.     

Data-resolution Matrix and Model-resolution Matrix for Rayleigh-wave Inversion Using a Damped Least-squares Method

Inversion of multimode surface-wave data is of increasing interest in the near-surface geophysics community. For a given near-surface geophysical problem, it is essential to understand how well the data, calculated according to a layered-earth model, might match the observed data. A data-resolution matrix is a function of the data kernel (determined by a geophysical model and a priori information applied to the problem), not the data. A data-resolution matrix of high-frequency (≥2 Hz) Rayleigh-wave phase velocities, therefore, offers a quantitative tool for designing field surveys and predicting the match between calculated and observed data. We employed a data-resolution matrix to select data that would be well predicted and we find that there are advantages of incorporating higher modes in inversion. The resulting discussion using the data-resolution matrix provides insight into the process of inverting Rayleigh-wave phase velocities with higher-mode data to estimate S-wave velocity structure. Discussion also suggested that each near-surface geophysical target can only be resolved using Rayleigh-wave phase velocities within specific frequency ranges, and higher-mode data are normally more accurately predicted than fundamental-mode data because of restrictions on the data kernel for the inversion system. We used synthetic and real-world examples to demonstrate that selected data with the data-resolution matrix can provide better inversion results and to explain with the data-resolution matrix why incorporating higher-mode data in inversion can provide better results. We also calculated model-resolution matrices in these examples to show the potential of increasing model resolution with selected surface-wave data.     

Evaluation of a dynamic multi‐class sediment transport model in a catchment under soil‐conservation agriculture

Soil erosion models are essential tools for the successful implementation of effective and adapted soil conservation measures on agricultural land. Therefore, models are needed that predict sediment delivery and quality, give a good spatial representation of erosion and deposition and allow us to account for various soil conservation measures. Here, we evaluate how well a modified version of the spatially distributed multi‐class sediment transport model (MCST) simulates the effectiveness of control measures for different event sizes. We use 8 year runoff and sediment delivery data from two small agricultural watersheds (0·7 and 3·7 ha) under optimized soil conservation. The modified MCST model successfully simulates surface runoff and sediment delivery from both watersheds; one of which was dominated by sheet and the other was partly affected by rill erosion. Moreover, first results of modelling enrichment of clay in sediment delivery are promising, showing the potential of MCST to model sediment enrichment and nutrient transport. In general, our results and those of an earlier modelling exercise in the Belgian Loess Belt indicate the potential of the MCST model to evaluate soil erosion and deposition under different agricultural land uses. As the model explicitly takes into account the dominant effects of soil‐conservation agriculture, it should be successfully applicable for soil‐conservation planning/evaluation in other environments. Copyright © 2008 John Wiley & Sons, Ltd.     

OOP技术在γ全谱仪软件设计中的应用

作者在本文中对传统的结构化程序设计思想与面向对象的程序设计思想进行了比较,具体说明ＯＯＰ技术在γ全谱仪软件设计中的应用。     

欧美国家绅士化问题的城市地理学研究进展

欧洲和北美地区的绅士化研究代表着世界绅士化研究的主流与方向。在介绍绅士化的传统与衍生概念的基础上,对绅士化概念问世以来的主要理论解释派系进行分析总结,特别是从生产端和消费端进行解释的两大阵营。本文对欧美绅士化的三波发展浪潮进行介绍,并将半个世纪以来的绅士化研究划分为4 个发展阶段:绅士化现象描述阶段、两大阵营的激烈论战阶段、两种理论的相互融合阶段与绅士化政策应对研究阶段。在对绅士化作为全球城市发展战略和绅士化的主要社会空间效应做出简单评价以后,展望了世界范围内绅士化问题的研究前景;绅士化研究虽然已经走过了很长的一段路,但依然存在着巨大的研究空间。