高速公路桥梁灌注桩工程成本价值分析

本文以桥目标成本管理等现代化管理方法,系统地指出了降低灌注桩工程成本的途径.对于桥梁灌注桩以外的企业的经营活动同样具有重要的指导意义.     

25～75℃酸性NaCl溶液中方铅矿的溶解动力学

在25～75℃、pH=0.43～2.45的1mol/LNaCl溶液中进行了方铅矿的溶解动力学实验。发现在远平衡条件下,方铅矿的溶解速率r与氢离子活度犤H+犦呈线性关系,溶解速率方程(速率定律)为:r=k犤H+犦,即对H+而言,溶解反应为一级。其中速率常数k为2.344×10-7mol/m2·s(25℃)、1.380×10-6mol/m2·s(50℃)、7.079×10-6mol/m2·s(75℃)。溶解反应的活化能为43.54kJ/mol,方铅矿的溶解机理为表面化学反应,速率决定步骤为表面配合物的离解。     

三类高强度悬式瓷绝缘子的成分和物相分析

为探讨高原牌70kN和进口120，210kN瓷绝缘子的成分和结构性能，中采用原子吸收光谱（AAS）和X射线衍射（XRD）方法，对三类产品进行了检测。结果表明，有效成分除K2O外，70kN和210kN的SiO2,Al2O3,Fe2O3含量接近，主晶相基本相同，有刚玉，莫来石、石英和长石等；结晶相总量：70kN35%，120kN40%,210kN48%，这表明机械强度愈大，结晶相含量愈高，只需调整70kN原样的部分成分，粒度和工艺，即生产出高等级（如210kN)瓷绝缘子。     

柱撑粘土矿物层间域的性质及其环境意义

柱撑粘土矿物是近年来胺国内外矿物学广泛关注的矿物材料之一。柱撑粘土矿物层间域是一个特殊的化学反应场所。本系统评述了氮氧化物、重金属离子、阴离子、肥料养分及有机污染物等环境污染物在柱撑粘土矿物层间域中的催化还原、吸附、脱附、控释及光催化反应机理，着重阐述了柱撑粘土矿物的层间域性质，讨论了它们的环境化学行为对环境的影响和意义。     

水晶包裹体的类型及成因综述

水晶中的包裹体是在水晶生长过程中被包裹在晶体内的由一相或多相物质组成的封闭系统。水晶中包裹体的形成与生长时的物化条件密切相关 ,而生长过程中的物化环境又直接影响了水晶的结晶习性。     

纤维素接枝丙烯酰胺/高岭土高吸水性复合材料研究

在高岭土的存在下，以N，N－亚甲基双丙烯酰胺作交联剂，以硝酸铈铵为引发剂微晶纤维素与丙烯酰胺进行接枝共聚反应，合成接枝纤维素／高岭土高吸水性复合材料。研究了纤维素与单体的配比、高岭土添加量、交联剂用量、引发剂用量及反应温度对吸水率的影响。用红外光谱表征复合材料的结构，用电子显微镜观察复合材料的表面与界面。结果表明，高岭土在接枝聚合物中能较好分散，复合材料吸水率达1166，对生理盐水溶液的吸水率达86。     

Gold Occurrence and Ore Genesis,Yata Micro—Disseminated Gold Deposit,Guizhou,Southwest China

The mode of occurrence of gold in the Yata micro-disseminated gold deposit is ap-proached through chemical phase studies coupled with ore-dressing monitoring and micro-beam analysis.The results showed that gold occurred for the most part as ultra-microscopic particles adsorbed on the surfaces or fracture planes of pyrite and other sulphides.The proportions of gold of different occurrences were estimated solutions containing nanometer-sized gold particles were prepared following the hydrolysis-reduction procedure and the adsorption of nanometer-sized gold on ordinary sulphides and rocks was experimentally determined.It is evident that sulphides are good adsorbents of gold and this is consistent with geological observations.     

Fitness-for-Purpose of Reference Material Reference Values in Relation to Traceability of Measurement, as Illustrated by USGS BCR-1, NIST SRM 610 and IAEA NBS28

As in all fields of sample analysis, reference materials play a large role in supporting measurements in the geosciences. While a rather large number of materials are in distribution (> 380), not all are equally effective or fit-for-purpose in supporting laboratory data quality and thereby assuring the desired comparability of measurements between laboratories. Equally important, reference values that are not fit-for-purpose cannot be used effectively to establish traceability links between laboratory measurements and national and international standards. The needed fitness-for-purpose is not achieved for reference values either when more than one reference value has been proposed and a consensus does not exist among users as to which should be used by all, or when reference value uncertainties are too large in comparison to those of routine laboratory measurements. The focus of this review will be, first to outline the current reality, and second to suggest ways in which certifications of RMs can be improved to provide reference values that are universally accepted and more fit-for-purpose in general laboratory use. The discussion will be illustrated largely by current uses of USGS BCR-1, NIST SRM 610 and IAEA NBS28, as these three materials are those for which the largest body of newly published data exists, according to recent bibliographies of the geoanalytical literature published annually in Geostandards Newsletter: The Journal of Geostandards and Geoanalysis.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.