水下滑翔器的运动建模与分析

介绍了水下滑翔器的工作机理，对其沉浮阶段的滑翔过程进行了动力学分析，推导了滑翔器在垂直剖面上的动力学方程。论文深入分析了水下滑翔器稳态时的运动规律，以水下滑翔器试验模型为例，推导了其稳态运动参数，通过线性化与适当的简化，得到模型在垂直剖面上的运动状态方程，讨论了系统的可控性与可观测性，为水下滑翔器系统的开发设计和控制提供了理论依据，具有重要的指导意义。     

超临界流体热力学函数的理论计算

Ｄｕａｎ等（１９９２。１９９６）基于分子间相互作用势能模型,建立了一个适合于超临界流体的状态方程,此方程能反演出世界上几十个实验室测定的成千上万个纯组分及混合物的ＰＶＴ（压力、体积、温度）数据（温压范围：Ｐ〈２ＧＰａ,Ｔｃ〈Ｔ〈２０００Ｋ）。最近的研究发现,此方程能准确预测Ｈ２Ｏ、ＣＯ２、ＣＨ４、Ｎ２及它们的混合物在Ｔ＝１．３Ｔｃ,Ｐ＝０到Ｔ＝２０００Ｋ,Ｐ＝１０ＧＰａ这一温压范围内的压力、体积、     

基于核函数NPSSB模型的HY-2A卫星雷达高度计海况偏差研究

利用机器学习的方法,对14个周期HY-2A卫星高度计数据:风速、有效波高和海面高度差值进行训练,探究海况偏差和风速、有效波高之间的关系,创建海况偏差核函数非参数模型(NPSSB),并与参数模型中具有代表性的BM3、BM4模型进行对比。研究表明:(1)核函数NPSSB模型能够很好的反映SSB与U、SWH之间的关系,SSB与U呈二次函数关系,SSB与SWH呈反比例函数关系;(2)核函数NPSSB模型对SSB的模拟能力与训练数据集相关,数据量越多,模拟能力越好;(3)核函数NPSSB模型与BM3、BM4模型都存在0～-0.03 m的差值,随着风速和有效波高的增加,差值的绝对值越大。     

Finite element modeling of heating phenomena of cracks excited by high-intensity ultrasonic pulses

A three-dimensional thermo-mechanical coupled finite element model is built up to simulate the phenomena of dynamical contact and frictional heating of crack faces when the plate containing the crack is excited by high-intensity ultrasonic pulses. In the finite element model, the high-power ultrasonic transducer is modeled by using a piezoelectric thermal-analogy method, and the dynamical interaction between both crack faces is modeled using a contact-impact theory. In the simulations, the frictional heating taking place at the crack faces is quantitatively calculated by using finite element thermal-structural coupling analysis, especially, the influences of acoustic chaos to plate vibration and crack heating are calculated and analysed in detail. Meanwhile, the related ultrasonic infrared images are also obtained experimentally, and the theoretical simulation results are in agreement with that of the experiments. The results show that, by using the theoretical method, a good simulation of dynamic interaction and friction heating process of the crack faces under non-chaotic or chaotic sound excitation can be obtained.     

带乘性噪声的一类非线性系统的滤波算法

针对带乘性噪声的一类非线性系统,给出了1种带单重渐消因子的强跟踪状态滤波算法。该算法将非线性系统线性化后,采用了线性最小方差估计方法来进行状态估计,通过运用正交原理和引入渐消因子,使得滤波效果具有强跟踪的优良性能。该算法扩展了卡尔曼滤波在带乘性噪声非线性系统状态估计中的应用范围。仿真结果表明了该算法的有效性。     

8000-year history of palaeoproductivity in a large boreal lake

An 8000-year record of palaeoproductivity, based on the chemical and chironomid stratigraphies from Lake Päijänne, S. Finland, was assessed with respect to known morphometric, climatic and anthropogenic events. A gradual trend of dystrophication and an associated decrease in aquatic production was detected during the Holocene, with the following exceptions: (1) high diatom and chironomid production around 8000-6000 cal yr BP, (2) eutrophication around 2000 cal yr BP, and (3) an anthropogenic signal during the last few decades.The changes in chironomid assemblages, before the past few decades, have mainly been shifts in concentration, but not in species composition. Variation in chironomid production was mainly explained by the accumulations of biogenic silicon, carbon and organic matter. Nutrient availability seems to be important in controlling biogenic silicon, which we use to infer past diatom production. The high production ca. 8000-6000 cal yr BP and the fluctuation in chironomid influx after ca. 2000 cal yr BP, however, were probably caused by the proposed warm/dry and cold/wet conditions during these times, respectively. These results highlight the sensitivity of boreal shield lake ecosystems to climatic forcing. In contrast, the pronounced change in the morphometry of the basin around 7000 cal yr BP had little effect on the trophic state of the lake. The human-induced trophic change during the past few decades has affected the Lake Päijänne ecosystem to an extent never experienced before during the last 8000-years.     

国际锂镁产业最新动态

就 1999年末以来国际锂镁产业领域一些新的变化予以报道 ,并就目前公开资料中所能获取锂镁的年产能力、销售份额、产品产值等实事数据一并予以提供     

海-陆-气耦合模式中海洋分量的温盐模拟分析

基于OASIS耦合器,发展了一套具有较高分辨率并行化的海-陆-气耦合模式,并进行了30年以上的耦合积分。为了评估模式中海洋分量的基本性能,首先考察了耦合模式对"气候漂移"的控制,然后对比分析了耦合与未耦合海洋环流模式模拟温度和盐度的气候态特征和季节变化,结果显示耦合模式的模拟结果中没有出现明显的"气候漂移现象",同时能较好的模拟全球大洋温盐分布的基本特征和季节变化。     

多因素复杂系统最佳因素权重确定的一种新思路——以深港西部通道工程深圳湾公路大桥为例

为了客观地反映各因素对目标问题的影响程度,本文首次提出了最佳因素权重概念。定义最佳因素权重为研究区域内系统质量处于极限状态时的各因素权重之组合。结合深港西部通道工程深圳湾公路大桥桥址比选方案,详细说明了本方法的研究思路及其确定方法。通过最佳因素权重方法,能客观地、定量地确定出多因素复杂系统中的最优场址。     

A mathematical model for steady‐state regolith production at constant erosion rate

It has been hypothesized that many soil profiles reach a steady‐state thickness. In this work, such profiles were simulated using a one‐dimensional model of reaction with advective and diffusive solute transport. A model ‘rock’ is considered, consisting of albite that weathers to kaolinite in the presence of chemically inert quartz. The model yields three different steady‐state regimes of weathering. At the lowest erosion rates, a local‐equilibrium regime is established where albite is completely depleted in the weathering zone. This regime is equivalent to the transport‐limited regime described in the literature. With an increase in erosion rate, transition and kinetic regimes are established. In the transition regime, both albite and kaolinite are present in the weathering zone, but albite does not persist to the soil–air interface. In the weathering‐limited regime, here called the kinetic regime, albite persists to the soil–air interface. The steady‐state thickness of regolith decreases with increasing erosion rate in the local equilibrium and transition regimes, but in the kinetic regime, this thickness is independent of erosion rate. Analytical expressions derived from the model are used to show that regolith production rates decrease exponentially with regolith thickness. The steady‐state regolith thickness increases with the Darcy velocity of the pore fluid, and in the local equilibrium regime may vary markedly with small variations in this velocity and erosion rate. In the weathering‐limited regime, the temperature dependences for chemical weathering rates are related to the activation energy for the rate constant for mineral reaction and to the ΔH of dissolution, while for local equilibrium regimes they are related to the ΔH only. The model illustrates how geochemical and geomorphological observations are related for a simple compositional system. The insights provided will be useful in interpreting natural regolith profiles. Copyright © 2010 John Wiley & Sons, Ltd.