Na depletion in modern adakites via melt / rock reaction within the sub-arc mantle

Interaction between slab-derived melt and mantle peridotite and the role of slab melt as a metasomatizing agent in the sub-arc mantle is being increasingly recognized. Adakite, the slab melt erupted on the surface, usually exhibits anomalously high MgO, CaO, Cr and Ni contents that indicate interaction with mantle peridotitite. Here we note that Cenozoic adakites have Na₂O contents below 5.8 wt.% with ∼95% samples lower than 5.0 wt.%, and are generally depleted in this component relative to experimental basalt partial melts (mostly beyond 5.0 wt.% and up to 9.0 wt.% Na₂O) produced under 1.5-3.0 GPa conditions that are most relevant to adakite production. We interpret the adakite Na depletion to be also a consequence of the melt / rock reaction that takes place within the hot mantle wedge. During ascent and reaction with mantle peridotite, primary adakite melts gain mantle components MgO, CaO, Cr and Ni but lose Na₂O, SiO₂ and perhaps K₂O to the mantle, leading to Na-rich mantle metasomatism. Selective assimilation of predominately mantle clinopyroxene, some spinel and minor olivine at high T/P has been considered to be an important process in producing high-Mg adakites from primary low-Mg slab melts [Killian, R., Stern, C. R., 2002. Constraints on the interaction between slab melts and the mantle wedge from adakitic glass in peridotite xenoliths. Eur. J. Mineral. 14, 25-36]. In such a process, Na depletion in the assimilated melt is the result of dilution due to the increase in melt mass. Phase relationships in the reaction system siliceous melt + peridotite and quantitative calculation suggest that assimilation of mantle clinopyroxene, olivine and spinel and fractional crystallization of sodic amphibole and orthopyroxene, under conditions of moderate T/P and increasing melt mass, is also an important process that modifies the composition of adakites and causes the Na depletion.     

Retailing local food in the Scottish-English borders: A supply chain perspective

Local food is championed as one alternative response to industrial systems of food production and supply. While advocacy for local food is high, there is a lack of empirical evidence about the actual shape and scale of such food supply chains, especially from a retail perspective. Using supply chain diagrams, this paper presents a summary of ‘new’ agro-food geographies for five different retail types—farm shops, butchers, caterers, specialist shops, supermarkets/department stores—that all source local food from suppliers in the Scottish-English borders. Presented as five separate ‘shopping trips’, the paper examines where, how and why retailers source local food. Results reveal the complex nature of local food systems, especially in terms of intra-sector competitive dynamics (with a notable tension between direct forms of retail and established (independent) retailers), links and overlaps with ‘normal’ food retail systems and elastic notions of the ‘local’. The paper also draws a key distinction between locally produced and locally supplied food products.     

The Tornquist Zone, a north east inclining lithospheric transition at the south western margin of the Baltic Shield: Revealed through a nonlinear teleseismic tomographic inversion

From July 1996 to August 1997 the TOR project operated 130 seismographs in North Germany, Denmark and South Sweden, with the aim of collecting signals from local, regional and teleseismic earthquakes. This data set is particularly interesting since the seismic antenna crosses the most significant geological boundary in Europe, the Tornquist Zone, which in the northern part is the border between the Baltic Shield and the younger European lithosphere. Previous studies have shown significant physical changes in the crust and upper mantle across this transition zone, including two independent teleseismic tomographic studies of the TOR data set. But these two studies disagree on the orientation of the slope of the transition. Both studies used an iterative linearized inversion method. We will in this work Preprint submitted to Elsevier Science 27 July 2005 present an inversion based on Bayesian statistics, where the solution space is examined in order to study a very large number of tomographic solutions and to examine the solution uniqueness and uncertainty. The method is applied to measurements of 3345 relative teleseismic P-phase travel times from 48 teleseismic earthquakes with good azimuthal coverage with respect to the great circle arc of the TOR array. We find the lithospheric transition to be a north east inclination of around 30° to 45° off vertical.     

硬致密泥岩钻进的新型复合片钻头的研究与应用

介绍了一种新型齿形的复合片钻头，在硬致密泥岩中钻进，与常规复合片钻头相比，具有很高的钻进效率和高的钻头寿命，解决了泥岩钻进效率低的难题。     

Bayesian Spatial Modelling of Gamma Ray Count Data

Gamma ray logging is a method routinely employed by geophysicists and environmental engineers in site geology evaluations. Modelling of gamma ray data from individual boreholes assists in the local identification of major lithological changes; modelling these data from a network of boreholes assists with lithological mapping and spatial stratigraphic correlation. In this paper we employ Bayesian spatial partition models to analyse gamma ray data spatially. In particular, a spatial partition is defined via a Voronoi tessellation and the mean intensity is assumed constant in each cell of the partition. The number of vertices generating the tessellation as well as the locations of vertices are assumed unknown, and uncertainty about these quantities is described via a hierarchical prior distribution. We describe the advantages of the spatial partition modelling approach in the context of smoothing gamma ray count data and describe an implementation that may be extended to the fitting of a more general model than a constant mean within each cell of the partition. As an illustration of the methodology we consider a data set collected from a network of eight boreholes, which is part of a geophysical study to assist in mapping the lithology of a site. Gamma ray logs are linked with geological information from cores and the spatial analysis of log data assists with predicting the lithology at unsampled locations.     

25～75℃酸性NaCl溶液中方铅矿的溶解动力学

在25～75℃、pH=0.43～2.45的1mol/LNaCl溶液中进行了方铅矿的溶解动力学实验。发现在远平衡条件下,方铅矿的溶解速率r与氢离子活度犤H+犦呈线性关系,溶解速率方程(速率定律)为:r=k犤H+犦,即对H+而言,溶解反应为一级。其中速率常数k为2.344×10-7mol/m2·s(25℃)、1.380×10-6mol/m2·s(50℃)、7.079×10-6mol/m2·s(75℃)。溶解反应的活化能为43.54kJ/mol,方铅矿的溶解机理为表面化学反应,速率决定步骤为表面配合物的离解。     

成矿流体演化与成矿物理化学

成矿流体是富含挥发分 (CO2 、CH4等 )是具有较高含盐度的特殊地质流体。本文讨论了在流体演化过程中挥发分的来源 ,指出主要来自水岩作用、有机质分解及地幔去气和岩浆 ;碱金属及卤素同样具有多来源的性质 ,以海水、含盐系淋滤、建造水为主要来源 ,含盐系重熔可以形成富含碱金属的成矿流体。流体演化过程中氢氧同位素、硫同位素的分馏主要与温度、水岩比值或硫源丰度有关。一个重要的结论是 ,成矿流体的形成主要与地质作用有关 ,而流体来源是次要的。海底热水流体的地球化学特征以高δ3 4 S值、中稀土富集及正铕异常为特征。本文总结了热水流体成矿物理化学条件 ,指出水热流体物相点 :1) 10 80℃ ,7.5× 10 8Pa水溶液与硅酸岩熔浆分熔点 ;2 )水溶液的第二个临界点是气水溶液的超临界点 (374.15℃ ,2 .2 1× 10 7Pa) ;3)水溶液的沸点 (≥ 10 0℃ ,≥ 1× 10 5Pa) ;4)水溶液的冰点 (≤ 0℃ ,1× 10 5Pa) ;5 )H2 O CO2 体系的不混溶温度点 (2 6 6℃ ,2 .15×10 8Pa[1 3 ] 等是重要的成矿相变点。     

2000年4月6日磁暴期间磁扰变化在低纬子午链的纬度效应

利用低纬地磁子午链上H和D分量的分均值数据 ,分析了 2 0 0 0年 4月 6日磁暴期间磁扰变化的纬度效应 .主要特点是 :(1 )急始期间H分量急始跃变幅随磁纬降低而减小 ,且急始变幅的下降率随磁纬降低而逐渐增大 ;(2 )初相期间H分量第 2峰值的变幅和初相持续时间随磁纬降低而减小 ;(3)主相期间H分量迅速减小 ,并随纬度降低最大变幅明显增加 ;(4)恢复相H分量呈两阶段上升趋势 ,前一阶段迅速上升 ,后一阶段上升速度明显减小 .最后对这些磁扰变化的纬度效应与空间电流体系的密切关系作了讨论 .     

我国制造业集群分布现状及其发展特征

目前，在我国很多地区，例如长江三角洲和珠江三角洲，以个别市、县、镇或村为范围，集中某种产品的生产所形成的制造业集群表现出极强的活力和竞争力。集群中的很多企业根据不同技术能力，纷纷进入了全球价值链，已经使中国成为跨国公司控制之下的“世界工厂”。文章从目前局限性的资料出发，将这一现象的分布现状进行了分析，并对其发展特征进行了描述。认为，在新型工业化道路中，企业只有在本地舍作和结网，加强创新，才能有效地插入全球价值链，参与国际竞争。为此，需要通过政策的支持，鼓励合作的信用环境，使价值链上的各级企业以及利益相关者进行合作。