基坑支护结构施工技术要点与工程实例分析(下)

４地下连续墙施工技术方法４．１要点（１）导墙的修筑精度（宽度、平直度、垂直度和标高等）和强度对成槽施工质量有直接影响,高质量的导墙是高质量槽段的基础,常用的导墙形式如图２所示。图２导墙断面形式示意图（ａ）板型;（ｂ）Ｌ型;（ｃ）倒Ｌ型;（ｄ）槽型导墙...     

内蒙额尔古纳在矿带中生代火山岩浆活动与金属成矿的关系

在岩石学和微量元素地球化学研究的基础上,通过对不同类型矿床的成矿岩体及围岩条件的分析,探讨了中生代火山岩浆活动与金属成矿的关系。认为晚侏罗世火山岩浆活动为成矿提供了有利的围岩的构造空间;早白垩世岩浆活动提供了成矿岩体及热力学条件,该期次火山岩浆的侵入并作用于不同的围岩、形成了由斑岩型Ｃｕ、Ｍｏ矿,浅成熟液型Ａｇ、Ｐｂ、Ｚｎ矿等组成的一系列矿床组合。     

不同洞口位置节能砌块隐形密框复合墙体恢复力模型研究

为研究洞口位置对节能砌块隐形密框复合墙体滞回特性的影响,对6个采用低周反复加载方式的1/2缩尺试件的试验现象及数据进行分析。基于试验结果和现有恢复力模型理论,对试验数据进行拟合分析,利用退化四折线模型和回归方法,建立节能砌块隐形密框复合墙体的四折线恢复力模型。试验结果表明:当洞口位于墙体中间时,试件滞回环愈加丰满,试件初始刚度有所增加,承载力衰减速率减小,卸载刚度退化速率变慢。通过对骨架曲线特征参数的计算,并和试验骨架曲线对比,两者吻合较好,表明该恢复力模型可以较好的反映出不同洞口位置对其滞回特性的影响,可为节能砌块隐形密框复合墙体的弹塑性分析及工程应用提供参考。     

地下连续墙技术在深基坑围护中的应用

结合某高层建筑深基坑围护的工程实例,介绍了地下连续墙施工技术在深基坑围护工程中的具体应用,阐述了地下连续墙施工的工艺流程和技术要点,提出了施工的注意事项和特殊问题的预防处理方法。     

旋挖钻机聚合物泥浆施工技术浅探

通过对聚合物泥浆护壁机理的分析,简要叙述了聚合物泥浆的性能特点,为在旋挖钻孔工艺中应用聚合物泥浆,总结了聚合物泥浆的制备、回收、净化、排放方法,优化了施工时泥浆循环系统的布置方案。结合工程实践,指出了旋挖钻进时应注意的问题和对一些易出现问题的处理方法,对旋挖钻机应用聚合物泥浆施工时具有一定的指导意义。     

小型空心砌块建筑墙体施工技术

某工程设计采用轻质砼小型空心砌块墙体,在施工过程中,从各个建筑细部上很下工夫,精益求精,使施工质量得到保证,本文介绍其施工技术与细部做法。     

Wall effect of underwater explosion load based on wave motion theories

Owing to the existence of the flow field boundary, the shock wave load near the boundary is different from the freefield shock wave load. In the present paper, the hull plate load subjected to underwater shock wave is investigated based onwave motion theories; in addition, the experimental study of the hull plate load is carried out. According to the theoreticalanalysis of the hull plate pressure, we find that the hull plate pressure oscillates repeatedly and decays rapidly with timepassing, the maximum hull plate pressure is 2/（1＋n） times the maximum free field pressure, where n is the ratio ofimpedance, and the impulse is much smaller than the free field impulse. Compared with the experimental study, thetheoretical results agree well with the experimental data.     

Pseudo-dynamic methods for seismic passive earth pressure behind a cantilever retaining wall with inclined backfill

The designing of retaining walls requires the complete knowledge of earth pressure distribution. Under earthquake conditions the design needs special attention to reduce the devastating effect, but under seismic conditions, the available literature mostly uses the pseudo-static analytical solution as an approximate to the real dynamic nature of the complex problem. This paper shows a detailed study on the seismic passive earth thrust behind a cantilever retaining wall with inclined backfill surface by pseudo-dynamic analysis. A planar failure surface has been considered. The effect of variation of parameters such as soil friction angle, wall friction angle and back fill inclination have been explored. A complete analysis shows that the time dependent non-linear behaviour of the pressure distribution obtained in the present method results in more realistic design values of earth pressures under earthquake conditions. Results are provided in tabular and graphical non-dimensional form and compared thoroughly with the existing values in the literature.     

Slip line theory applied to a retaining wall–unsaturated soil interaction problem

An extension of slip line theory to unsaturated soils is presented and applied to the problem of a rigid retaining wall rotating about its toe into unsaturated soils. Suction is introduced using the effective stress concept. Soil–wall interface friction is defined carefully. The influence of suction on limiting passive earth pressures is analysed for two soils under steady state evaporation and infiltration. Suction increases the limiting passive stress at the soil–wall interface, with a dependence on the steady state flow type. The displacement of the retained soil is studied assuming the wall undergoes a rotation increment. The results show a clear difference in the displacement for evaporation and infiltration.     

雅鲁藏布江深厚砂砾卵石覆盖层钻探工艺

为了开展雅鲁藏布江流域综合规划及其水资源开发利用与保护专题研究工作,在雅鲁藏布江干流里龙坝址和本宗坝址共布置了4个200~300 m深的钻孔。主要通过在西藏高寒地区4个深厚覆盖层钻孔的成功实施经验,对西藏高寒地区深厚覆盖层勘探成孔工艺与技术进行研究探讨。