C60全珊瑚海水混凝土的钢筋锈蚀行为研究

采用线性极化电阻法,测试了C60全珊瑚海水混凝土（coral aggregate seawater concrete,简称CASC）的线性极化曲线、自腐蚀电位（E_corr）和极化电阻（R_p）,研究了不同暴露时间、不同种类钢筋CASC的钢筋腐蚀行为,提出了提升岛礁CASC结构耐久性的建议措施。结果表明：随着暴露时间的延长,CASC的E_corr和R_p均逐渐降低,钢筋的耐蚀性能逐渐减弱。不同种类钢筋CASC耐蚀性能规律为：316不锈钢筋优于有机新涂层钢筋,优于普通钢筋。即使暴露0 d,CASC中普通钢筋仍会发生锈蚀,表明普通钢筋在不附加任何防腐措施的条件下不适用于岛礁CASC结构。综合分析阻锈效果和成本因素,316不锈钢筋的性价比明显低于有机新涂层钢筋,建议岛礁CASC工程优先选用有机新涂层钢筋。     

硅灰加固宁波软土的试验研究

为探索硅灰对软土的力学性质的影响,以宁波鄞州地区一种淤泥质黏土为试样,掺入不同量的硅灰,对硅灰加固土的力学性质和结构特征进行了测试。采用三轴不固结不排水剪切试验,测试分析了不同掺入量的硅灰加固土的应力应变关系,通过扫描电镜SEM照片分析了不同硅灰掺入量的硅灰加固土的结构特征。结果表明:(1)硅灰可以提高软土的黏聚力,黏聚力随着硅灰掺入量的增加而增大;(2)随着硅灰掺入量的增加,硅灰加固土的抗变形能力呈先增加后减小的趋势;(3)同一围压条件下,随着硅灰掺入量的增加,硅灰加固土的破坏偏应力逐渐增加;(4)随着硅灰掺入量的增加,硅灰加固土中大孔隙逐渐减少,小孔隙逐渐数量增加,孔径<1μm的小孔隙组分逐渐占优。     

新型抗水氯氧镁水泥防渗渠在自然环境的水化产物、相转变规律及其对强度的影响

氯氧镁水泥(Magnesium oxychloride cement, MOC)具有快凝、早强、高强、防火和不腐蚀玻璃纤维等优点,非常适合于制作玻璃纤维增强薄壁制品,在农业灌溉工程中具有良好的应用前景。采用XRD和TOPAS分析了新型抗水氯氧镁水泥制成内蒙古防渗渠的物相组成,探讨了氯氧镁水泥制品在自然环境的水化产物与相转变规律、以及相组成对强度的影响。结果表明,在水分缺少的条件下,氯氧镁水泥的水化产物主要为5Mg(OH)_2·MgCl_2·8H_2O(5·1·8)和Mg(OH)_2;在水分充足的条件下,水化产物主要为Mg(OH)_2和5·1·8,碳化产物为碳化氯氧化镁Mg(OH)_2·MgCl_2·2MgCO_3·6H_2O(1·1·2·6)和水菱镁矿4MgCO_3·Mg(OH)_2·4H_2O(4·1·4)。水化产物对强度有促进作用,而碳化产物会降低强度。通过10年的工程环境考验,证明新型氯氧镁水泥制品在环境中能够保持主要强度相5·1·8的稳定性,具有良好的长期力学性能。     

Assessment of micro‐aggregation using laser diffractometry

In order to evaluate the influence of the measuring technique on the determination of (micro‐)aggregation in soil and sediment samples, results of grain size distributions of undispersed silty soil samples obtained by the sieve‐pipette method are compared with those obtained using a laser diffraction grain size analyser, the Coulter LS‐100. Reduced major axis relationships are calculated which may be used to convert Coulter LS‐100 results to those obtained by the sieve‐pipette method. The relationships obtained are very similar to the reduced major axis relationships established for dispersed silty soil samples. The results also show that the Coulter LS measurements have a systematic bias compared to the sieve‐pipette data. This implies that, if the percentage of (micro‐)aggregation is determined, the (interpretation of the) results will be strongly dependent on the measurement technique used. Using the calibration relationships that were established, nomographs can be developed to predict the level of sieve‐pipette (micro‐) aggregation from Coulter LS‐100 data. Copyright © 1999 John Wiley & Sons, Ltd.     

水泥固化锌污染土电阻率与强度特性研究

以标准砂及普通硅酸盐水泥为试验材料,制作水泥固化锌污染土样,进行了一系列电阻率和无侧限抗压强度试验。研究了交流电频率对水泥固化锌污染土电阻率的影响、不同含量锌离子对水泥缓凝作用的影响、锌离子含量和龄期分别对水泥土电阻率和强度的影响、电阻率与无侧限抗压强度的关系。结果表明：电阻率随电流频率的增加而明显降低,尤其当频率低于50 kHz时为甚;不同含量的锌离子对水泥土的缓凝作用影响明显,随着锌离子含量的增大,水泥土强度的充分发挥所需时间逐渐增长,但在锌离子含量为500 mg/kg时,缓凝作用表现异常;电阻率和强度均随龄期的增加而增长,随锌离子的含量的增加上下波动,电阻率在锌离子含量为50 mg/kg和500 mg/kg时出现极值,强度在锌离子含量为100 mg/kg和500 mg/kg时出现极值;在各个龄期下,电阻率与强度均呈现出很好的线性关系。     

The use of mycorrhiza for eco‐engineering measures in steep alpine environments: effects on soil aggregate formation and fine‐root development

Steep erosion‐prone and vegetation‐free slopes are widespread in alpine areas and are often discussed since they have a high socio‐economic damage potential. We present an eco‐engineering approach to test whether a mycorrhizal inoculum improves the establishment of hedge brush layers and in turn soil structural stability on a steep, coarse‐grained vegetation‐free slope in the eastern Swiss Alps. We established (i) mycorrhizal and (ii) non‐mycorrhizal treated eco‐engineered research plots on a field experimental scale, covering a total area of approximately 1000 m² on an east‐northeast (ENE) exposed slope, where many environmental parameters can be regarded as homogeneous. After a full vegetation period, we quantified soil aggregate stability, the formation of water stable aggregates and the fine‐root development. Our results illustrate that the establishment of brush layers without mycorrhizal inoculum increased aggregate stability significantly. Against our expectation and glasshouse experiments, the addition of mycorrhizal inoculum did not have a statistically significant effect after one vegetation period although it tended to increase aggregate stability. Analogously, root length density (RLD) tended to be higher at the non‐mycorrhizal treated site. Aggregate stability was significantly correlated with RLD. Studies on a bigger field experimental scale are inevitable, complement glasshouse studies and lead to a better understanding for a successful application of sustainable eco‐engineering measures in alpine environments. Based on our results and considering the fact that the response time in natural ecosystems may be slower than in laboratory approaches, we conclude that long‐term field studies are necessary to validate results gained through laboratory experiments. Copyright © 2014 John Wiley & Sons, Ltd.     

Diagenetic fluid evolution and water-rock interaction model of carbonate cements in sandstone: An example from the reservoir sandstone of the Fourth Member of the Xujiahe Formation of the Xiaoquan-Fenggu area,Sichuan Province,China

Carbonate cement is the most abundant cement type in the Fourth Member of the Xujiahe Formation in the Xiaoquan-Fenggu area of the West Sichuan Depression. Here we use a systematic analysis of carbonate cement petrology, mineralogy, carbon and oxygen isotope ratios and enclosure homogenization temperatures to study the precipitation mechanism, pore fluid evolution, and distribution of different types of carbonate cement in reservoir sand in the study area. Crystalline calcite has relatively heavy carbon and oxygen isotope ratios(δ13C = 2.14‰, δ18O = -5.77‰), and was precipitated early. It was precipitated directly from supersaturated alkaline fluid under normal temperature and pressure conditions. At the time of precipitation, the fluid oxygen isotope ratio was very light, mainly showing the characteristics of a mixed meteoric water-seawater fluid(δ18O = -3‰), which shows that the fluid during precipitation was influenced by both meteoric water and seawater. The calcite cement that fills in the secondary pores has relatively lighter carbon and oxygen isotope ratios(δ13C = -2.36‰, δ18O = -15.68‰). This cement was precipitated late, mainly during the Middle and Late Jurassic. An important material source for this carbonate cement was the feldspar corrosion process that involved organic matter. The Ca2+, Fe3+ and Mg2+ ions released by the clay mineral transformation process were also important source materials. Because of water-rock interactions during the burial process, the oxygen isotope ratio of the fluid significantly increased during precipitation, by about 3‰. The dolomite cements in calcarenaceous sandstone that was precipitated during the Middle Jurassic have heavier carbon and oxygen isotope ratios, which are similar to those of carbonate debris in the sandstone(δ13C = 1.93‰, δ18O = -6.11‰), demonstrating that the two are from the same source that had a heavier oxygen isotope ratio(δ18O of about 2.2‰). The differences in fluid oxygen isotope ratios during cement precipitation reflect the influences of different water-rock interaction systems or different water-rock interaction strengths. This is the main reason why the sandstone containing many rigid particles(lithic quartz sandstone) has a relatively negative carbon isotope ratio and why the precipitation fluid in calcarenaceous sandstone has a relatively heavier oxygen isotope ratio.     

压力溶解对颗粒聚集岩体中热-水-应力耦合影响的数值模拟

在自主研制的孔隙介质热-水-应力耦合有限元程序中引入Taron等提出的颗粒聚集体的压力溶解模型,针对一个假设的实验室尺度且位于非饱和石英颗粒聚集岩体中的高放废物地质处置模型,拟定两种计算工况：（1）孔隙率和渗透系数是压力溶解的函数;（2）孔隙率和渗透系数均为常数,进行4 a处置时段的数值模拟,考察了岩体中的温度、颗粒界面水膜及孔隙中的溶质浓度、迁移和沉淀质量、孔隙率及渗透系数、孔隙水压力、地下水流速和应力的变化、分布情况。研究结果表明：工况1计算终了时,压力溶解使得孔隙率和渗透系数分别下降到初始值的43%～54%、4.4%～9.1%。在核废料释热温度场的作用下,工况1、2中的负孔隙水压力分别为初始值的1.00～1.25倍、1.00～1.10倍,前者表现了压力溶解的明显影响;两种工况的岩体中的应力量值及分布基本相同。     

Stabilization of Expansive Clays Using Granulated Blast Furnace Slag (GBFS) and GBFS-Cement

Expansive clays undergo swelling when subjected to water. This can cause damage, especially to light weight structures, water conveyance canals, lined reservoirs, highways, and airport runways unless appropriate measures are taken. In this study, granulated blast furnace slag (GBFS) and GBFS-cement (GBFSC) were utilized to overcome or to limit the expansion of an artificially prepared expansive soil sample (sample A). GBFS and GBFSC were added to sample A in proportions of 5–25% by weight. The effects of these stabilizers on grain size distribution, Atterberg limits, swelling percentage and rate of swell of soil samples were determined. GBFS and GBFSC were shown to successfully decreasing the total amount of swell while increasing the rate of swell.