水泥土强度的影响因素

水泥浆体搅拌地基加固技术是地基处理的技术方法之一,其水泥—土固结体的强度主要受地基土的含水量、水泥掺入量及地基土类别的影响。本文通过室内及工业性试验表明:土体的含水量对水泥土强度具有负作用;水泥土强度与水泥掺入比不是简单的单调上升关系;地基土的类别对水泥土强度的影响较大,淤泥及淤泥质土由于富含有机质,强度较低,粉质粘土、粘土形成的水泥土强度较高。     

Robust control based on feedback linearization for roll stabilizing of autonomous underwater vehicle under wave disturbances

In the case of Autonomous Underwater Vehicle(AUV) navigating with low speed near water surface,a new method for design of roll motion controller is proposed in order to restrain wave disturbance effectively and improve roll stabilizing performance.Robust control is applied,which is based on uncertain nonlinear horizontal motion model of AUV and the principle of zero speed fin stabilizer.Feedback linearization approach is used to transform the complex nonlinear system into a comparatively simple linear system.For parameter uncertainty of motion model,the controller is designed with mixed-sensitivity method based on H-infinity robust control theory.Simulation results show better robustness improved by this control method for roll stabilizing of AUV navigating near water surface.     

长期稳定河口流路方案评价

分析了长期稳定黄河河口流路的必要性及可行性,阐明了长期稳定流路的思路,对比评价了几条方案,提出了流路安排建议。     

Diagenesis and origin of calcite cement in the Flemish Pass Basin sandstone reservoir (Upper Jurassic): Implications for porosity development

The Flemish Pass Basin is a deep-water basin located offshore on the continental passive margin of the Grand Banks, eastern Newfoundland, which is currently a hydrocarbon exploration target. The current study investigates the petrographic characteristics and origin of carbonate cements in the Ti-3 Member, a primary clastic reservoir interval of the Bodhrán Formation (Upper Jurassic) in the Flemish Pass Basin.The Ti-3 sandstones with average Q_86.0F_3.1R_10.9 contain various diagenetic minerals, including calcite, pyrite, quartz overgrowth, dolomite and siderite. Based on the volume of calcite cement, the investigated sandstones can be classified into (1) calcite-cemented intervals (>20% calcite), and (2) poorly calcite-cemented intervals (porous). Petrographic analysis shows that the dominant cement is intergranular poikilotopic (300–500 μm) calcite, which stared to form extensively at early diagenesis. The precipitation of calcite occured after feldspar leaching and was followed by corrosion of quartz grains. Intergranular calcite cement hosts all-liquid inclusions mainly in the crystal core, but rare primary two-phase (liquid and vapor) fluid inclusions in the rims ((with mean homogenization temperature (T_h) of 70.2 ± 4.9 °C and salinity estimates of 8.8 ± 1.2 eq. wt.% NaCl). The mean δ¹⁸O and δ¹³C isotopic compositions of the intergranular calcite are −8.3 ± 1.2‰, VPDB and −3.0 ± 1.3‰, VPDB, respectively; whereas, fracture-filling calcite has more depleted δ¹⁸O but similar δ¹³C values. The shale normalized rare earth element (REE_SN) patterns of calcite are generally parallel and exhibit slightly negative Ce anomalies and positive Eu anomalies. Fluid-inclusion gas ratios (CO₂/CH₄ and N₂/Ar) of calcite cement further confirms that diagenetic fluids originated from modified seawater. Combined evidence from petrographic, microthermometric and geochemical analyses suggest that (1) the intergranular calcite cement precipitated from diagenetic fluids of mixed marine and meteoric (riverine) waters in suboxic conditions; (2)the cement was sourced from the oxidation of organic matters and the dissolution of biogenic marine carbonates within sandstone beds or adjacent silty mudstones; and (3) the late phases of the intergranular and fracture-filling calcite cements were deposited from hot circulated basinal fluids.Calcite cementation acts as a main controlling factor on the reservoir quality in the Flemish Pass reservoir sandstones. Over 75% of initial porosity was lost due to the early calcite cementation. The development of secondary porosity (mostly enlarged, moldic pores) and throats by later calcite dissolution due to maturation of organic matters (e.g., hydrocarbon and coals), was the key process in improving the reservoir quality.     

Cement Deep Soil Mixing (CDSM) for Solidification of Soft Estuarine Sediments

A preliminary study was conducted to determine the potential for cement deep soil mixing (CDSM) technology as a method for in-situ solidification of contaminated river and estuarine sediments. The study was conducted in Newark Bay, near the mouth of the Passaic River, New Jersey. The primary objective of the study was to evaluate the viability of CDSM for the in-situ S/S with a focus on: 1) determining the correct mix of the cement slurry, which provides rapid stabilization of the sediment matrix, 2) potential resuspension of solids during CSDM operations, 3) the effects of high organic content on the solidification process, and 4) the feasibility of using conventional dredging/extraction methods once the sediments have been stabilized and allowed to cure. The results of the study show CDSM slurry mixtures, as low as 7% in cement content, result in significant solidification and strength gain of in-situ sediments under ambient conditions. In sediments with very high organic contents (> 20%), the slurry mix would need to be adjusted to account for retardation effects of organics on cement hydration. Sediment resuspension during application was shown to be minimal at a distance of as little as 75 feet from the mixing head. Strength gains were considerable, effectively consolidating the sediment particles in a secure matrix, but not so high as to preclude extraction of solidified sediments with conventional dredging equipment. Dredged solidified sediment exhibited characteristics of a stiff glacial clay, and as such was easier to handle and transport than untreated dredged sediments. This technique has high potential to be used as an interim remedial measure prior to either extraction and decontamination/disposal or proper capping.     

基于两阶段稳定图的随机子空间识别结构模态参数

基于振动的结构健康监测的前提是从振动测试信号中提取结构模态参数。随机子空间方法是近年来发展起来的一种线性系统辨识方法,可以有效地从环境激励的结构响应信号中提取结构模态参数。在随机子空间识别方法中,确定系统的阶数是该方法的关键工作,稳定图方法是一种比较新颖的确定系统阶次的方法。但是随机子空间方法容易产生虚假模态,这也是随机子空间方法的一个主要缺陷。因此针对于这一缺陷提出了一种基于两阶段稳定图的随机子空间识别结构模态参数方法,该方法的基本思想是将在现场采集的结构的输出信号进行分段,将各段信号用随机子空间结合稳定图进行识别,然后将所有各段所识别的模态参数再一次用稳定图方法进行分析,得出结构的模态参数。最后用一三跨连续梁的数值模型对该方法进行验证,结果表明该方法具有良好的识别效果。     

水泥粘结剂基材边坡绿化技术研究——现场试验研究

通过现场工程试验研究,进一步论证了水泥粘结基材替代化学粘结基材的岩质边坡绿化技术的可行性;同时提出了岩质边坡工程绿化应按"循序渐进"来进行植被恢复的理念.     

深层水泥搅拌法在土体加固中的应用

介绍了在某护岸改造工程利用CDM加固体作为临时挡土墙的施工工艺。结果表明该工艺具有理想的效果,开创了CDM加固护岸坡脚土体的新工艺。     

Experimental study on hydrodynamic performance of SWATH vessels in calm water and in head waves

An extensive experimental investigation on four SWATH hull forms has been conducted in calm water and in regular waves at University of Naples Federico II. Calm water tests have been analyzed in the range of Froude number Fr_T from 0.1 to 0.6. For all four SWATH configurations at the speed, corresponding to Fr_T 0.32, the behaviour in regular waves has been tested. The results of heave, pitch and vertical accelerations are presented in nondimensional form as RAO. For the “most promising” SWATH #4 configuration, a set of stabilizing fins have been designed and an active stabilization system has been developed. The developed SWATH#5 has been tested in calm water on three displacements in the range of Fr_T from 0.1 to 0.65. The dynamic wetted surface has been identified and the residual resistance coefficient C_R as well as R_T/Δ are reported. Seakeeping tests have been performed in regular head sea and in head and following irregular sea at Fr_T = 0.50. The conditions for the occurrence of dynamic longitudinal instabilities have been identified. The results allows to comment the effect of slenderness of struts and SWATH’s immersed bodies on resistance and seakeeping and concerns the applicability of SWATH concept to small craft.     

老挝Nam Ngum 5水电站重力拱坝裂缝处理实践

针对老挝Nam Ngum 5水电站重力拱坝裂缝进行的灌浆处理,采用化学灌浆和水泥灌浆相结合,取得了良好的治理效果。详细介绍了裂缝深度的检测方法和裂缝止裂措施,以及灌浆施工工艺。